Kayfun/Russian wick setup that works great for me.
- Thread starter savagemann
- Start date
- th_trl_thread_readers 0
- Status
Subscribing. This will be a great resource for when my Russian and KFL+ arrive.
Try this method on your next build…more wick on coil=more vapor & flavor. 1.5mm 28ga 1.25ohm
Try this method on your next build more wick on coil=more vapor & flavor. 1.5mm 28ga 1.25ohm
Thanks for that! So do you make the tails longer to bring them back up and to the top of the coil, or is that a seperate piece of cotton going up?
1 piece looped back up off the decks and over the top, I find a little bigger gap between the bottom of the coil and the air inlet helps, I really haven't found a wicking method that produces the flavor and vapor this one does, and if you try it be patient, it takes a bit of break-in, well worth the wait.
Looks awesome Truman.
I may give this a go tonight.
I just got 2 kayfun lite clones in from FT.
I have 2 of the 3.1 clones on the way as well.
I also have 2 russian 91% clones coming from vapor break.
Also another from focal ecig.
LOL
I am kayfun/Russian CRAZY I tell ya.
The firast one that got me started with these attys was a real Russian 91%
I decided to get my whole fleet going with these great attys.
It's gonna be hard to top off all 15 mechs, but I'm about half way there now.
I may give this a go tonight.
I just got 2 kayfun lite clones in from FT.
I have 2 of the 3.1 clones on the way as well.
I also have 2 russian 91% clones coming from vapor break.
Also another from focal ecig.
LOL
I am kayfun/Russian CRAZY I tell ya.
The firast one that got me started with these attys was a real Russian 91%
I decided to get my whole fleet going with these great attys.
It's gonna be hard to top off all 15 mechs, but I'm about half way there now.
It's no wonder there's no Kayfun types available...you bought um all. Looks like you'll have plenty of coil/wick test beds to play around with...let me know how mine holds up. Have fun brother.
You have a link to that? I'm having a hard time picturing it in my head. Thanks.
Sorry this is all I've got...very simple Bizzy, install your wick as you normally would, just leave enough wick to loop back up, you'll tuck in on the coil sides between screw heads and coil sides...that's it.
Try this method on your next build more wick on coil=more vapor & flavor. 1.5mm 28ga 1.25ohm
I tried this but felt like the airflow was restricted because of the extra wick.
Leave a slightly larger gap between the bottom of the coil and airflow tube, and a little less cotton as well...I've never had any issues with a tight draw. More wick on coil=more flavor/vapor...for me anyway.
I would really like to see a video of the "truman wick". I'm sure it would help others also. I haven't tried it yet but I learn best seeing it being done.
Thanx for sharing it!
Thank you for this thread savageman i was about to give up on the keyfun which would have just about been the end of vaping for me ( tried most clearos ant tank systems which ended up in the trash i dont like burnt or gurgly hits) then i got a kayfun but kept getting burned hits i was at witts end till i read this tada problem solved now im having lotsa kay fun
not to be a troll or anything but wasnt this the way RIP did his regular horizontal microcoil in his microcoil/chimney coil video?
Anyways after giving up on chimney coils and sacrificing its flavor by going back to horizontal for better VP... gonna give trumans wicking method a try at my next tank refill. I can already imagine how much juice that setup uses lol
Edit: wouldn't that extra amount of cotton cause frequent dry hits?
Anyways after giving up on chimney coils and sacrificing its flavor by going back to horizontal for better VP... gonna give trumans wicking method a try at my next tank refill. I can already imagine how much juice that setup uses lol
Edit: wouldn't that extra amount of cotton cause frequent dry hits?
Last edited:
did trumans wick method... wow thats great
edit: i raised the coil a little bit off the deck before i did it but im thinking the airflow is still a bit restricted....how high did u set you coil?
edit: i raised the coil a little bit off the deck before i did it but im thinking the airflow is still a bit restricted....how high did u set you coil?
Last edited:
- Status
