Let's talk hardware

[Chakris]

Maybe if I get a 100mA Twist from joyetech and a KFM clone, I could point it at a cop and get arrested ?

seriously, looks like a nice setup Chak. Anything has got be an improvement over the T3's I used to use on eGo's

LOL In Diagon Alley mode you could turn the cop into a toad!!!

Thanks, it works so much better than the T3s - it's a shame I don't think I'll be able to use up all those extra heads I bought for them and the Evod. Time to PIF, I guess.

 

[EddardinWinter]

There is an interesting speculation in the KFL thread about alignment of the bottom center screw position. You KFL folk should give it a look!



Tapped out

 

[Dusty_D]

There is an interesting speculation in the KFL thread about alignment of the bottom center screw position. You KFL folk should give it a look!



Tapped out

They are correct in their speculation. The hole runs through and through and does affect the vape quality.


Sent from my iPhone using Tapatalk 2

 

[EddardinWinter]

They are correct in their speculation. The hole runs through and through and does affect the vape quality.


Sent from my iPhone using Tapatalk 2

Well, that is what I said in the thread, Dusty. But I wanted them to visit over there and see the whole discussion....

You (intentionally) hold out details at the worst times, and get blabbering uncontrollably at others. You do it in a way that is so imperfectly perfect, it is hard to imagine it is in any way accidental.



Tapped out

 

[Dusty_D]

Well, that is what I said in the thread, Dusty. But I wanted them to visit over there and see the whole discussion....

You (intentionally) hold out details at the worst times, and get blabbering uncontrollably at others. You do it in a way that is so imperfectly perfect, it is hard to imagine it is in any way accidental.



Tapped out

Information is freely available my friend, you have but to ask the right question.

Some of this ground has been covered before, while you held out on joining the KLite gang. It's nice to revisit it through fresh eyes though..

Word of caution. While adjusting the centrepost screw, you do loosen the positive post inside the chimney. Movement in there can wreak havoc on the consistency of your coils.




Sent from my iPhone using Tapatalk 2

 

[EddardinWinter]

Information is freely available my friend, you have but to ask the right question.

Some of this ground has been covered before, while you held out on joining the KLite gang. It's nice to revisit it through fresh eyes though..

Word of caution. While adjusting the centrepost screw, you do loosen the positive post inside the chimney. Movement in there can wreak havoc on the consistency of your coils.




Sent from my iPhone using Tapatalk 2

Yeah, I checked my ohms after turning it. Usually any loss of tension in the post results in jumpy ohm readings. Naturally, I intend to revisit the positive terminals at the end of the tank.

See, that was some useful info you posted there. Some would say you buried the useful data beneath a robust heap of your standard Maestro-talk.

I wouldn't say that it was necessarily done that way. I might not argue with them, either.



Tapped out

 

[MrPicC]

Pluid + kayfun + 6 days = super enlarged orings and a huge loss of juice.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

 

[XfooYen]

Pluid + lungs + years of vaping it = lipoid pneumonia or some other unforeseen consequence from vaping anise and citrus oils.

 

[MrPicC]

1-30 ml a year won't kill me and if it does then see ya. ..

Sent from my SAMSUNG-SGH-I747 using Tapatalk

 

[EddardinWinter]

1-30 ml a year won't kill me and if it does then see ya. ..

Sent from my SAMSUNG-SGH-I747 using Tapatalk

Good point. Getting enough pluid to become sick is prevented by the scarcity of the product.

I have been prevented from trying it due to the scavenger hunt BS required to obtain it. That is what prevents me from trying many juices. If I cannot show up to the website, place an order, and move on with my life...no thanks. I don't mind waiting for it once I have ordered. But if you cannot get your act together well enough to let me order at my leisure, I don't want to count on your e-liquid. I already have to play enough chasing games in real life, I don't need that sort of entertainment when I am spending my own money.

 

[jwhorner6]

Pluid + kayfun + 6 days = super enlarged orings and a huge loss of juice.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

Which o-rings Swelled? If you soak them in alcohol for a while it usually brings them back down to normal size

Sent from my EVO using Tapatalk

 

[MrPicC]

Top Oring above the chimney. As I was filling the kayfun it all leaked out from the tip. Being an idiot I didn't realize the issues so I attempted at filling it again. 6ml wasted.
Good tip on the alcohol! I'll do that later but have plenty upon plenty of spares.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

 

[MrPicC]

Good point. Getting enough pluid to become sick is prevented by the scarcity of the product.

I have been prevented from trying it do to the scavenger hunt BS required to obtain it. That is what prevents me from trying many juices. If I cannot show up to the website, place an order, and move on with my life...no thanks. I don't mind waiting for it once I have ordered. But if you cannot get your act together well enough to let me order at my leisure, I don't want to count on your e-liquid. I already have to play enough chasing games in real life, I don't need that sort of entertainment when I am spending my own money.

I completely agree BUT when vaping watch does get it, they get plenty for at least one night.
I also didn't purchase this bottle, it was a gift from a cool dude.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

 

[Bronze]

Pluid + kayfun + 6 days = super enlarged orings and a huge loss of juice.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

I've heard this same complaint many times.

 

[Bronze]

Good point. Getting enough pluid to become sick is prevented by the scarcity of the product.

I have been prevented from trying it due to the scavenger hunt BS required to obtain it. That is what prevents me from trying many juices. If I cannot show up to the website, place an order, and move on with my life...no thanks. I don't mind waiting for it once I have ordered. But if you cannot get your act together well enough to let me order at my leisure, I don't want to count on your e-liquid. I already have to play enough chasing games in real life, I don't need that sort of entertainment when I am spending my own money.

I'm the same way Lion.

 

[jwhorner6]

Top Oring above the chimney. As I was filling the kayfun it all leaked out from the tip. Being an idiot I didn't realize the issues so I attempted at filling it again. 6ml wasted.
Good tip on the alcohol! I'll do that later but have plenty upon plenty of spares.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

That is the one I figured it was. Believe it or not the ehpro kayfun clone is actually better for pluid due to the way the top oring is inside that top cap. It is tucked away slightly different than on the real kayfun and I haven't had an issue with it at all.

Sent from my EVO using Tapatalk

 

[MrPicC]

Nice I wonder if the hcigar one is the same then. I've got 2 of those coming eventually.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

 

[Bronze]

Nice I wonder if the hcigar one is the same then. I've got 2 of those coming eventually.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

MP, I'm really liking my HCigar Nemesis. I'm impressed with the quality build. And this is a clone. The button binds at certain times but I know there is a fix for that. JW and others have given me some tips to remedy the problem but I haven't employed them yet because Slim has some magnets enroute that will solve the problem. But if HCigar incorporates the same quality throughout their products as they do with the Neme clone then I suspect they will be just fine.

 

[Daniel_c]

Hey everyone, I have an equipment question for you all. So right now I have the inferno starter kit. I got it about two weeks ago but I can tell already that I don't like it much. Bronze introduced me to the spinners by vision. I really like it and it was also mentioned to me that a kanger protank should work well with it. The problem with this is that I have no experience with clearomizers so I'm not really sure how they work and what I need to replace and how often I I need to replace those things. Also if I am wanting to have multiple flavors through out the day do I need to pick up multiple protank. I have about $100 to spend and I am wanting to make sure that I don't screw up again and buy something that I will regret like the inferno because I really want to keep it simple and I would rather spend my money on juice then mods

 

[retic1959]

OK I set this KFC up with the prewrapped coil that came with it , I've got 100ft of 30ga ordered should be here on wednesday and I'm feeling too lazy to go to the BM and pay 3$ a foot for it , coming in at 3.2 Ohms even with this high resistance it's putting a whole new spin on Legend , I thought I knew what Legend tastes like but damn was I wrong , OMG the flavor this thing puts out is amazing , no leaks , no gurgling , unfreaking believable .