- Status
Yeah I have a carto tank for the provari that is made for it and I don't wanna part with it. The vaperfexion pro-v2. And I heard about these cartos so I figured I would give them a shot. And man they are pretty sweet. I also had a thought that I would sell the provari if I got a dna20 mod bit I found a guy that does ceramic coating on mods and am thinking of maybe getting the provari done. Check this out.
Sent from my iPhone 5 using Tapatalk
On FB search OCD mods. Dude has some great looking mods that he's done. And he does just about anything. For me to send a provari and a Kayfun lite to him it would cost 89 dollars. But I am waiting till I find a cone that fits right till I proceed.
Sent from my iPhone 5 using Tapatalk
Okay everyone, here we go, this is everything that I will be ordering tomorrow so if you have any comments or suggestions about things that I could change I would appreciate it.
One of these
VAMO V5 Variable Voltage, Variable Power (Wattage) Electronic Cigarette
One of these
Xtar WP2 II Smart Li-ion Charger for 18650, 18500, 18350,14500, 16340 3.7V Li-ion Batteries for Electronic Cigarettes
Two of these
18650 - Panasonic CGR18650CE Lithium Ion battery - 2250 mAh - Flat Top
One of these
The Titan #1 - Kidney Puncher
Two of these
Aspire BDC Atomizer Heads - 5 Pack - Kidney Puncher
One of these
Tank Airflow Controller - Kidney Puncher
Two of these
Aspire BDC Glass Nova - Kidney Puncher
Total after taxes and shipping fees come to $146.64
A bit expensive in my opinion but I'm getting a very large amount of stuff.
One of these
VAMO V5 Variable Voltage, Variable Power (Wattage) Electronic Cigarette
One of these
Xtar WP2 II Smart Li-ion Charger for 18650, 18500, 18350,14500, 16340 3.7V Li-ion Batteries for Electronic Cigarettes
Two of these
18650 - Panasonic CGR18650CE Lithium Ion battery - 2250 mAh - Flat Top
One of these
The Titan #1 - Kidney Puncher
Two of these
Aspire BDC Atomizer Heads - 5 Pack - Kidney Puncher
One of these
Tank Airflow Controller - Kidney Puncher
Two of these
Aspire BDC Glass Nova - Kidney Puncher
Total after taxes and shipping fees come to $146.64
A bit expensive in my opinion but I'm getting a very large amount of stuff.
Thanks Bronze and Chak , the cotton did sort itself out after 15 hits or so I don't know why it took that long I soaked the coil and wick with juice before I reassembled and the coil wasn't brand new , it had 2 3mm strands of silica in it that I replaced with cotton , I'll stick with silica for now , I'm not in the mood to boil cotton .Close Chak. 30ga Kanthal, 10 wraps, 2.0 mm (5/64ths) inside diameter with 4 strands of 1.0 mm silica. I take a pair of 1mm strands and pull them through the coil with a fishtape made of kanthal wire...Sorry for the blurry picture. Double over a piece of Kanthal wire to use as a fishtape to feed your silica through your coil.
R
*RJ*
Guest
Are you getting the stainless steel or black chrome Vamo? Both chromes will eventually wear off...however I use my black chrome daily and so far so good and I've had it a while now. Also, if you "like" Kidney Puncher you can hook up with some coupon codes (if they are still doing this that is). See this post:
http://www.e-cigarette-forum.com/fo...378340-kidney-puncher-coupons-other-news.html
Good job and I hope you enjoy your purchases!
I'm getting the black chrome, hopefully it doesn't wear off and yes I'm using discount coupons on both the island vapor and kidney puncher sites, it's sucks kidney puncher doesn't have free shipping though like Island vapor
You'll be set with that Daniel , only thing missing is replacement heads for the protanks you're getting but the Aspire's the better vape and the protanks take more experience to use with some pg/vg ratios, so you're good to go , pull the trigger man .
Thanks, and I am actually getting 5 replacement heads that he is sending along with the protanks. Heck I don't even know everything I'm getting but I will be happy soon though cause it all came in today and I'm picking up my e juice and tanks now!
I had a Sigelei Zmax v5 that was black chrome. The finish will come off pretty quickly on the Vamo if they use the same process. I hope your mod doesn't wear as quickly as mine did. Thing works great, just doesn't look as good as when I first got it. I got my other one in stainless, looks the same as when I took it out of the box, with a few more scratches
Hey everyone so I got my e juice today and my tanks from jwhorner6. I think he surprised me with a Genises tank also, only issue is that the dang thing won't unscrew or pop off so I'm stuck with trying to figure out how to do this 
Also a tiny screw came out when I tried to unscrew it but I got it and put it in the bag that came
with it also, are these all replacements for the kanger, I believe they are just making sure
with it also, are these all replacements for the kanger, I believe they are just making sure
Wait until one of the other members comes on to help you with the genny I can't open the photo to identify it , there's a possibility that you can break it if you disassemble it in the wrong way , don't quite think you're up to rebuilding yet anyway .
No I'm really not lol, well probably just put it away until I can take the leap
That looks like an AGA, the top cap should be secured by o-rings. Just pull and twist, apply pressure but be careful not to break the glass.
Yep those are the replacement heads for the protanks
Sent from my iPad using Tapatalk 2
Yep those are the replacement heads for the protanks
Sent from my iPad using Tapatalk 2
Nice PIF Jwhorner! Very nice. I gotta PIF my aga and a mech too. Haven't decided to whom though
Anyone rocking cotton wicks on their Kayfuns? I am considering it, but my only concern is how quickly the wicks go south... with silica, I can just dry burn and be done with it, but cotton is cheap and plentiful.
I'm using cotton for now, but have used silica as well. I've got that on one 32g micro that's reading about 2.5 ohm (bit high for my liking, but have to wait for my 28g & 30g to come in. The others are twisted 32g and a twisted 0.10 whatever (Russian unit of measure, metric?). Both those are coming in at 1.5 & 1.3 ohm.
I like to dry burn too, but cotton is cheap and easy enough to swap out. As for taste & vapor production, I kind of lean towards cotton. Just have to be careful not to empty the tank and try to take a hit. Burnt cotton does not taste good at all! And there is no cure for a burnt cotton wick, it has to be replaced!
- Status
Similar threads
