My experience with silica has been disappointing as well. I really wanted it to work, but it just didn't. Flavor-wise for me, organic cotton is king!
Roaring via Tapatalk
Roaring via Tapatalk
The last time I used silica I soaked it in the juice I was using and lit it up. Let it burn off and repeated. That's the ONLY way I got any flavor from silica in a Kayfun. I am gonna try cotton ball again today because I have it in my dripper and it's great.
Sent from my iPhone 5 using Tapatalk
Heh... that's why everyone needs to experiment with their own stuff.
I tried a silica wick in my KFC once.... took all of about half a tank before I pulled it. It tasted HORRID.... It was wicking just fine, but there was just some nasty flavor that overpowered the juice.... with cotton micros, only thing I taste is the juice.
Finally got the R91% clone to my liking 2mm diameter microcoil 10 wraps 30ga 1.9ohms with organic cotton ball wick at 10 watts with Legend giving me close to the flavor I get out of the 3.1 with a higher resistance coil airflow is definitely the difference between the two clones .
Ha! I remember when the Kayfun was all there was (not long ago). Now there are clones of clones.![]()
Ha! I remember when the Kayfun was all there was (not long ago). Now there are clones of clones.![]()
Technically the R91% is an alternative to the original Kayfun, an evolution by one of the original designers.
The KFL+ copied the better of the R91% less adjustable center pin.
I don't know for certain who created what in the SvoëMesto think tank, I have an uneducated feeling it was the creator of the R91% who actually designed the Kayfun.
I do both at the same time3mm silica wick in the tank feeding a cotton bed and wick...
Technically the R91% is an alternative to the original Kayfun, an evolution by one of the original designers.
The KFL+ copied the better of the R91% less adjustable center pin.
I don't know for certain who created what in the SvoëMesto think tank, I have an uneducated feeling it was the creator of the R91% who actually designed the Kayfun.
The R91% had the aiflow control first so would that make the Kayfun lite plus the clone of a clone of a clone ?True, but the KF was out before the R91. So I guess technically the R91 is a clone of the KF (or itself). One or the other.![]()
The R91% had the aiflow control first so would that make the Kayfun lite plus the clone of a clone of a clone ?
I had heard the same story as 54 above mentioned , that the R91% designer was part of the original SM company and had a parting of the ways . The manufacturer of what I'm calling an R91% clone actually calls it a Kayfun lite clone but this clone has aiflow control and was out before the Kayfun lite plus was out so I'm calling it an R91% clone it's definitely not a 3.1 clone , the 3.1 has a broader range of adjustment on the aiflow so it's easier to dial in .The Russian was the clone of the Kayfun 3.1. The R91 retained the features of the Russian/3.1 in the size of the KFL. It took the best of both of them and raised it to the next level.
ENOUGH!!!!!
Let's try this... call the Kayfun and Kayfun Lite the Kayfun and Kayfun lite....Call the Russian and Russian 91% the Russian and Russian 91%....
and everyone ELSE is a clone.