Here's the rub MP: April has always liked a cool vape (me too for that matter). She used the carto that came with her VMOD kit. It's a Silo, 2.2ohm cartomizer. She says it tastes a little hot/burnt. I believe her because she is very used to a cooler vape (she always has her Twists dialed at the bottom of the range). So the only way to control the wattage on that VMOD is to change the resistance on the carto/atty. The 2.2 ohm Silo is too hot for her so I would like to step it up to 2.8 ohms or even higher. I also want her to try an atty so I will need to find the right one for that too but I want her to try the one that came with her kit first to see how it works for her so we know what direction to go in. Lastly, I want to get a little longer atty so there is less chance she vapes up smoke juice in the event she gets a little flooded. I know she will not like that! Where can I find the minis in your picture?
- Status
Here's the rub MP: April has always liked a cool vape (me too for that matter). She used the carto that came with her VMOD kit. It's a Silo, 2.2ohm cartomizer. She says it tastes a little hot/burnt. I believe her because she is very used to a cooler vape (she always has her Twists dialed at the bottom of the range). So the only way to control the wattage on that VMOD is to change the resistance on the carto/atty. The 2.2 ohm Silo is too hot for her so I would like to step it up to 2.8 ohms or even higher. I also want her to try an atty so I will need to find the right one for that too but I want her to try the one that came with her kit first to see how it works for her so we know what direction to go in. Lastly, I want to get a little longer atty so there is less chance she vapes up smoke juice in the event she gets a little flooded. I know she will not like that! Where can I find the minis in your picture?
Bronze/April, what do you use currently on your twists? Is there a reason you don't want to use that on the VMod?
The minis that I have are 1.7ohm so they would be even hotter than the 2.2 Silo.
She uses a carto tank and CE3 bottom coil on her Twists. And yes, the 1.7 will blow her head off. We want to go in the other direction. April doesn't possess any testosterone in her body so the cooler the better for her. I'm thinking 2.8 and above.
Thanks Dust.
What's the ohms on the cartos used in the Carto tanks, as well as the CE3's? She could very easily use either of those on the Vmod right? It only puts out around 3.5 - 3.7v of power under load.
I haven't been keeping up lately, started reading a little almost 200 posts back... Did Robin get her ProVari issues sorted?
I'm itching for a new mod. I'm mostly a carto tank guy with a little bit of dripping and RBAs here and there. A blem ProVari Mini is really really tempting, but a Reo with a rebuildable is calling me, too. Decisions, decisions...
I'm itching for a new mod. I'm mostly a carto tank guy with a little bit of dripping and RBAs here and there. A blem ProVari Mini is really really tempting, but a Reo with a rebuildable is calling me, too. Decisions, decisions...
I don't her resistance on her tank. It's an F16. That wont work on the VMOD anyway (that I know of). The VMOD is a bottom feeder. Her CE3's wont work on the VMOD either. I think she is mid 2's on those. They're bottom coils though so they are cooler.
Nope. It's going back but I do have another one on the way. A Blem that should be here tomorrow or the next day. That way I will have even more to break
Where does that VMOD bottom feeder feed the juice? Through the hole right past the positive post? I am not seeing any other way. Odd.
I see GotVapes has some 3.2 ohm, wide bridge Smoktech attys. Yes, that seems a bit too much resistance, but believe me, April really likes a cool vape. Now to find a carto for her.
I see GotVapes has some 3.2 ohm, wide bridge Smoktech attys. Yes, that seems a bit too much resistance, but believe me, April really likes a cool vape. Now to find a carto for her.
I'm on a very brief lunch break and I want to let you all know I appreciate all the brainstorming on my behalf! Thanks
I'm on a very brief lunch break and I want to let you all know I appreciate all the brainstorming on my behalf! Thanks
Ah, we're havin' fun anyway. Besides, we like you.
Think I found some cartos for you too. still workin' on it.
R4 Kanger ProTank & extras CoOp is NOW LIVE FOLKS!!!
Hop on over to the active CoOp threads using the link above.
Hop on over to the active CoOp threads using the link above.
Bronze the bottoms feeder has a bottle with a straw and it feeds right up the hole in the bottom of any carto, atty, rba. I kinda like the carto idea. Squeeze, saturate, vape and repeat after a while. Seems simple. But I want a freeking reo myself now with an atty. always wanted to try a LR306 and a 357. When will it ever end?!?! And I am down to 12mg now so I can chain vape.
Sent from my iPhone 5 using Tapatalk
I'll be danged! So then you can put a CE3 or an F16 on a VMOD? Well, maybe ther F16 cuz it is a cartotank but the CE3 no because it has a solid bottom on it.
Why would you want to put a CE3 or F16 on a bottomfeeder? The whole point is to get away from the crappy tank stuff!
Why would you want to put a CE3 or F16 on a bottomfeeder? The whole point is to get away from the crappy tank stuff!
Agreed! Just curious is all. I wouldn't even put a carto on a VMOD. If I had a VMOD, I'd use a straight up atty.
I would think. I just want to learn about the VMOD so I can give April all her options. Plus I just enjoy learning about it. I never really looked into bottom feeders and always wanted to. Now I know.
Dust, did you ever use the attys that Vapage packs up in their kits? They use a stainless steel mesh. Looks interesting. Or maybe that was a different one. Can't remember now. Tough to get old.
Last edited:
Dust, did you ever use the attys that Vapage packs up in their kits? They use a stainless steel mesh. Looks interesting. Or maybe that was a different one. Can't remember now. Tough to get old.
The vapage atomizers are very good. I use them periodically on my reo
Sent from my EVO using Tapatalk 2
- Status
Similar threads
