listing side by side mods

[TheWestPole]

Not sure if this has been posted.

Few more sbs mod i came across while searching for alternative to xvostick, there is vargus mod releasing soon. Retailed at usd300 from what i gathered:
Vargus mod specs :
1. Material : 95T Alumimium body (anodized&powder coating)
2. Chip: DNA40
3. Atomizer deepening 45mm depth , 24mm diameter
4. Battery : Single 18650 flat head
5. Buttons - Brass / Stainless Steel
6. Fat daddy 510 Connector
7. threaded battery cap.
8. Dimensions : 90(H) x 49(W) x 26mm(T)
9. Top-side fire button
10. Brass/silver covered conductivity elements

Also there is hypnostick using starplat that come with of titanium or brass material for the cap and button, and mix choices of stab wood or ebony wood. Retailing cheapest from usd450 of ebony + brass. Specs as below:

Tech specs:
Board: StarPlat 50W TC (Kantal, Ni200, Ti, SS)
Battery: 18650 (Single)
Dimentions: 76(H) x 57(W) x 28mm(T)
Weight: 105 g.
Kit: Stick, adapter ring, key

Really nice! Top firing, regulated side-by-side. That's the form I like best.

 

[TheWestPole]

I ordered from Angelcigs usa.
I got the extra glass, but no extra bottle.

Thanks. Will check it out.

 

[Woofer]

Really nice! Top firing, regulated side-by-side. That's the form I like best.

Agreed!!! That is sweet, any links anyone?

 

[Tmebs]

Not too heavy to carry around all day? I have discovered I use mods that don't put a dent in my shoulder when I carry it in my purse. That means some of my favorites end up left at home, not used very much. I should probably weigh them to figure out what my limits are, or find a way to carry a smaller suitcase, er purse.

Ok I just went and scaled a few mods.
So the Kato/with full(5mls.) tank with battery is 292g
The istick 50 with velocity is 182g
And the Encom tnt80/26650 with battery and no topper is 307g

The tnt was my last purchase and even though its heavy it just feels better in the hand....my sig100w was just starting to feel like I was trying to hold on to a 2x4.

But with that said, I no longer work and rarely leave the house, but if and when I do, I won't need to bring device and a bottle of juice too.

I also wanted the ss/alum Kato, but they only had the black at AC usa so I was also thinking of some kind of wrap too.

 

[DPLongo22]

Not sure if this has been posted.

Few more sbs mod i came across while searching for alternative to xvostick, there is vargus mod releasing soon. Retailed at usd300 from what i gathered:
Vargus mod specs :
1. Material : 95T Alumimium body (anodized&powder coating)
2. Chip: DNA40
3. Atomizer deepening 45mm depth , 24mm diameter
4. Battery : Single 18650 flat head
5. Buttons - Brass / Stainless Steel
6. Fat daddy 510 Connector
7. threaded battery cap.
8. Dimensions : 90(H) x 49(W) x 26mm(T)
9. Top-side fire button
10. Brass/silver covered conductivity elements

Also there is hypnostick using starplat that come with of titanium or brass material for the cap and button, and mix choices of stab wood or ebony wood. Retailing cheapest from usd450 of ebony + brass. Specs as below:

Tech specs:
Board: StarPlat 50W TC (Kantal, Ni200, Ti, SS)
Battery: 18650 (Single)
Dimentions: 76(H) x 57(W) x 28mm(T)
Weight: 105 g.
Kit: Stick, adapter ring, key

I like this one a LOT. But I'll let it grow some legs first.

 

[DPLongo22]

View attachment 521258 View attachment 521259

focalecig.com - Authentic Moyuan Blade Mod Folding Mech Starter Kit - Black

And I would like this, if it was a regulated mod.

 

[DancingHeretik]

And I would like this, if it was a regulated mod.

Maybe it'll take a Kick.

I do like that it opens up. So no danger of the base unscrewing from your tank and dumping out all the juice.

 

[DPLongo22]

Maybe it'll take a Kick.

I do like that it opens up. So no danger of the base unscrewing from your tank and dumping out all the juice.

I'm not much of a Kick fan, but I get ya. For the likes of me there are enough regs to choose from. If I can't manage to pick one, I don't deserve it anyway.



Hi, DH!

 

[Shawn Hoefer]

I'm not much of a Kick fan, but I get ya. For the likes of me there are enough regs to choose from. If I can't manage to pick one, I don't deserve it anyway.



Hi, DH!

Have you seen the Wismec control head? Thinking I want one...

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[DPLongo22]

Have you seen the Wismec control head? Thinking I want one...

Sent from my SAMSUNG-SM-N910A using Tapatalk

I have, but I've no mechs left to put one on. I deviated a couple/few years back, and stuck with what I really loved (regulated mods). And it's not like there's a shortage (not even in front of me), so I think/hope that I'll be OK.

Thanks though - it is a pretty cool looking thing.

 

[Katdarling]

Did I post my Wismec control head pic here, @Shawn Hoefer?

 

[Shawn Hoefer]

Did I post my Wismec control head pic here, @Shawn Hoefer?

Don't recall seeing it, but I'm sure people wouldn't mind seeing it again.

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[Katdarling]

Oh they'll mind. I promise you that.


Wismec head on a GLV. Please don't try this at home.

 

[DPLongo22]

Oh they'll mind. I promise you that.


Wismec head on a GLV. Please don't try this at home.


View attachment 523120

SMH &

 

[eGoinMD]

Update on the Phantus, and it's metallic smell/taste...

I took the bottom plate off, and wiped the whole thing down with isopropyl alcohol, and after letting it dry, it's 95% better than before.

 

[ColoKaren]

Thanks for steering me here, @Katdarling ! Really awesome thread...

I'm getting close to going for a couple Katos w/kicks (found the replacement Chi you flat top caps on fleabay for placement under the 510). Also have a couple Goblin minis + Wismec heads in the basket at heaven gifts. I'm siding toward having these small mechs for the vapepocalyse, although unregulated skeeeeeeers me.

I'd have ordered a klownstick if they looked at all reliable out of the box... I read up on nickel coils, and won't be touching those. So unless ti can do a good job, TC is a waste for my uses anyway. Really, if Provi would release a mini-Radius or SBS in the next couple months, I'd stop looking.

I'm also watching a thread for a new squonker called MyMods, since my hubby got me a Chalice III for graduation, and I don't drip. No clue if the fuse he's including will make it safe enough for me to breathe easy.

 

[Woofer]

if Provi would release a mini-Radius

We dream the same dream!

 

[Katdarling]

Welcome @ColoKaren ! I'm sure you'll find this an most enjoyable thread (great and wise peeps) and hopefully you'll be steered to, not skeeeered from the right next device!

A Mini Radi might even get ME interested!!


Woofer, your timing in posting is perfection, as is your statement....... (MLK Day)

 

[Woofer]

Woofer, your timing in posting is perfection, as is your statement....... (MLK Day)

awww thank you {{{{Katdarling}}}}

A Mini Radi might even get ME interested!!

@Vape360 ^^^^^^^^^^^^^^^^^^^^^^^^^^^

 

[eGoinMD]

Suddenly, I find myself contradicting...myself....

Broke down today and ordered a Kato Square clone from Angelcigs, $23.99 shipped from the US. Found myself, whilst digging out of our D.C.area "historic storm", wishing for longer battery capacity than I am getting with 18350's(switching every 3 hours or so now that I have gotten my KFL+ clones dialed in). I will make do with the size difference...

Good thing my wife is OK with my miniscule vaping budget.