lJoy/Limitless RDTA (build tutorial and first impressions)

[juicynoos]

Sod it! I went and ordered the fancy drip tip conversion set from Signature Tips. Even though I have paid about 25% more than I did for the Limitless itself (thanks Gearbest)

Sounds like a pricey option Bill, might as well have bought the Griffin and got another rta to boot! Signature tips look to have some great gear though but couldn't find the one you got..can you put up a link.

 

[bsidb]

I'm still goona try it with the Notch coils, just keep em low

 

[BilltheBloody]

Sounds like a pricey option Bill, might as well have bought the Griffin and got another rta to boot! Signature tips look to have some great gear though but couldn't find the one you got..can you put up a link.

Here you go:
Chameleon Caps / Limitless RDTA

I ordered a stainless steel chameleon base and a drip tip to go with it. It's not actually clear whether you actually need the base, but I went for one anyway - it'll make the Limitless look a little less plasticy, (though may get hot).

Sent from my SM-N910F using Tapatalk

 

[juicynoos]

@BilltheBloody
Thanks for the link, very fancy indeed-enjoy!

 

[MadVLN]

you would think there would be a cheaper solution using a top cap from a 24mm RDA that allows for standard 510 drip tips. hopefully someone will figure one out as this is the only 24mm atty i own.


i rewicked mine last night as they were getting a bit dark.

 

[Momato]

Same here, in fact I ordered a bunch at the same time as the Limitless expressly for that purpose. I think as long as they are smaller than 5 mm ID (ie. the 3.5 mm) they should work just fine set on soft or without a boost. Otherwise, you might get some spitback.
Unfortunately, I ordered the 5 mm ID notch coils so will have to use those in my Merlin rta's



As long as you own a Griffin or Kennedy 24 all is good, if not..well poop! I'm not happy with those tips that feel like you're sucking on a hose!

Yes I agree they should give you different drip tip options it's too hot and too close to the lips I actually burned my lips on it the first day but the 510 adapter from the griffin helped I was lucky to have a griffin


Sent from my iPhone using Tapatalk

 

[BilltheBloody]

I read somewhere that a Kennedy 24 drip tip fits the Limitless. I went as far as emailing a US store that does a lot of mods for the Kennedy and had drip tips for about $7.99, to see if they could confirm. I just got a one word reply, "nope". Can't decide if they were actually advising me or they were just an elitist ...... who wouldn't help someone who bought a Chinese made atomiser.

Sent from my SM-N910F using Tapatalk

 

[MadVLN]

i got confirmation that these drip tips from FT work. i think it looks a bit funny with the chuff and additional drip tip. i might try to grind off the chuff lip and put one of these tips on.

$3.34 Resin Wide Bore Drip Tip - random colors at FastTech - Worldwide Free Shipping

 

[jj6404]

So I am really confused by those who say they are "reversing" the chuff reducer... Do you mean turning it upside down and sticking it in?? Because I tried that and no way it fits for me.

Anyway I ordered a replacement Kennedy delrin drip tip since I own neither the Griffin or Kennedy (anymore) and I have to say I actually like it a lot!

I may be wrong but from pics it appeared that the Kennedy tip was shorter than the Griffen so that's why I opted for this one and I'm glad I did. It was a tight fit but the Kennedy is friction fit so it's a wider bore than the Griffen tip which has o-rings. I still wish the limitless didn't have this raised section on the top cap to make the overall height shorter but for around $13 it was a solution that I'm very happy with. 27g SS/36g KA1 fused claptons at 75 watts and it does not get hot whereas with the stock "reducer" it burnt my lips plenty. I'd like to also note for prospective buyers that the bottom of the Kennedy tip sits just about flush with the flat top edge of the limitless top cap when you force it down all the way which makes for smooth uninterrupted airflow. Still think iJoy should have included something like this but being that they don't, I think a Kennedy tip is the perfect solution for now.



Sent from my iPhone using Tapatalk

 

[MadVLN]

So I am really confused by those who say they are "reversing" the chuff reducer... Do you mean turning it upside down and sticking it in?? Because I tried that and no way it fits for me.

Anyway I ordered a replacement Kennedy delrin drip tip since I own neither the Griffin or Kennedy (anymore) and I have to say I actually like it a lot!

I may be wrong but from pics it appeared that the Kennedy tip was shorter than the Griffen so that's why I opted for this one and I'm glad I did. It was a tight fit but the Kennedy is friction fit so it's a wider bore than the Griffen tip which has o-rings. I still wish the limitless didn't have this raised section on the top cap to make the overall height shorter but for around $13 it was a solution that I'm very happy with. 27g SS/36g KA1 fused claptons at 75 watts and it does not get hot whereas with the stock "reducer" it burnt my lips plenty. I'd like to also note for prospective buyers that the bottom of the Kennedy tip sits just about flush with the flat top edge of the limitless top cap when you force it down all the way which makes for smooth uninterrupted airflow. Still think iJoy should have included something like this but being that they don't, I think a Kennedy tip is the perfect solution for now.



Sent from my iPhone using Tapatalk

i too was confused for a bit on the reversed chuff reducer. but OP posted pics on pg3 of this thread showing it. you flip it upside down, then go in thru the bottom of the barrel/chuff. it leaves the top of the tip hanging down pretty close to the coils. im sure it would vape at my 70w and your 75w. the OP toots his at 15w if i recall correctly. i'm thinking of grinding most of the lip down and using it that way.

 

[suprtrkr]

So I am really confused by those who say they are "reversing" the chuff reducer... Do you mean turning it upside down and sticking it in?? Because I tried that and no way it fits for me.

Anyway I ordered a replacement Kennedy delrin drip tip since I own neither the Griffin or Kennedy (anymore) and I have to say I actually like it a lot!

I may be wrong but from pics it appeared that the Kennedy tip was shorter than the Griffen so that's why I opted for this one and I'm glad I did. It was a tight fit but the Kennedy is friction fit so it's a wider bore than the Griffen tip which has o-rings. I still wish the limitless didn't have this raised section on the top cap to make the overall height shorter but for around $13 it was a solution that I'm very happy with. 27g SS/36g KA1 fused claptons at 75 watts and it does not get hot whereas with the stock "reducer" it burnt my lips plenty. I'd like to also note for prospective buyers that the bottom of the Kennedy tip sits just about flush with the flat top edge of the limitless top cap when you force it down all the way which makes for smooth uninterrupted airflow. Still think iJoy should have included something like this but being that they don't, I think a Kennedy tip is the perfect solution for now.



Sent from my iPhone using Tapatalk

It can be inserted from the top, or from the underside. Just pull the chuff out and stick the silly thing in from the bottom.

 

[suprtrkr]

i too was confused for a bit on the reversed chuff reducer. but OP posted pics on pg3 of this thread showing it. you flip it upside down, then go in thru the bottom of the barrel/chuff. it leaves the top of the tip hanging down pretty close to the coils. im sure it would vape at my 70w and your 75w. the OP toots his at 15w if i recall correctly. i'm thinking of grinding most of the lip down and using it that way.

I like the way the top of the chuff looks with it in from the bottom. But putting it in from the top makes the chuff 1/8th inch or so taller, as some like.

 

[bsidb]

Here you go:
Chameleon Caps / Limitless RDTA

I ordered a stainless steel chameleon base and a drip tip to go with it. It's not actually clear whether you actually need the base, but I went for one anyway - it'll make the Limitless look a little less plasticy, (though may get hot).





nt from my SM-N910F using Tapatalk

I got one just now also

 

[MadVLN]

I like the way the top of the chuff looks with it in from the bottom. But putting it in from the top makes the chuff 1/8th inch or so taller, as some like.

i'll have to grind the lip of the reducer for sure. i tried to put it in reverse last night and my coils are too big and the chuff won't push all the way down . i have 3mm claptons in mine.

 

[suprtrkr]

i'll have to grind the lip of the reducer for sure. i tried to put it in reverse last night and my coils are too big and the chuff won't push all the way down . i have 3mm claptons in mine.

I've never tried it. I like the chuff full open with big coils. It may be you're right. I've had 3+mm coils in it, but not with the reducer.

 

[Highwayman1224]

Well, I forgot to check my mail yesterday & when I checked it today my Limitless showed up!! Tracking from Gearbest still shows it's in China!! Threw a build in it using the coils that came with it and I love this thing!! I don't think I'll even use my Avocado 24 anymore because this thing blows it outta the water as far as flavor goes in my opinion! I'll definitely be ordering another one! Very impressed!

 

[jj6404]

View attachment 562859 Well, I forgot to check my mail yesterday & when I checked it today my Limitless showed up!! Tracking from Gearbest still shows it's in China!! Threw a build in it using the coils that came with it and I love this thing!! I don't think I'll even use my Avocado 24 anymore because this thing blows it outta the water as far as flavor goes in my opinion! I'll definitely be ordering another one! Very impressed!

Why do you think it produces better flavor than the Avocado 24? I only ask because I wanted the A24 and only got the Limitless because they were sold out. I still kind of planned to get the Avocado 24 one day because I honestly like the looks better and I thought the Avocado would produce better flavor because it appears to me to have a smaller chamber, smaller airflow, and smaller bore drip tip. I'm just curious how the flavor compares in more specific terms...

P.S.--What drip tip do you have on yours in the pic and why isn't it down all the way?

 

[Highwayman1224]

Why do you think it produces better flavor than the Avocado 24? I only ask because I wanted the A24 and only got the Limitless because they were sold out. I still kind of planned to get the Avocado 24 one day because I honestly like the looks better and I thought the Avocado would produce better flavor because it appears to me to have a smaller chamber, smaller airflow, and smaller bore drip tip. I'm just curious how the flavor compares in more specific terms...

P.S.--What drip tip do you have on yours in the pic and why isn't it down all the way?

I just think that the flavor is more muted in the Avocado 24 then it is in the Limitless. The driptip is from my Griffin & that's as far as I can get it to go down.

 

[Highwayman1224]

I just ordered another limitless from Vape royalty a few minutes ago.

 

[Highwayman1224]

Another reason I like this better than the Avocado is it's way easier to wick it & fill it!