ManCaveMods - VW amd VV Wood Mods

[matador]

I was hoping you did since you changed the subject I'm December when I brought the dna30 up

I missed this sale
But did they change anything with the board besides the 30w limit?


Sent from my iPhone using Popcorn

You can use sub ohm coils. 0.5 ohms is the lowest. Also the batteries have to have a 10amp discharge rate, which means you wont see any 18500 dna 30 mods. The dna20 needs a 7amp max discharge battery. Other than that not much has changed. I asked Brandon if they had reverse battery protection and he told me that if he put that protection in it, it would have made the board longer and he didnt want modders to have to change their designs to fit the board. I think that applies more to metal dna20 mods.

 

[pelton54]

You can use sub ohm coils. 0.5 ohms is the lowest. Also the batteries have to have a 10amp discharge rate, which means you wont see any 18500 dna 30 mods. The dna20 needs a 7amp max discharge battery. Other than that not much has changed. I asked Brandon if they had reverse battery protection and he told me that if he put that protection in it, it would have made the board longer and he didnt want modders to have to change their designs to fit the board. I think that applies more to metal dna20 mods.

I guess that's a pretty good reason to not add the reverse battery protection....he should definitely sell some type of add on chip for it though for people that custom make their mods


Sent from my iPhone using Popcorn

 

[itsrayray]

I guess that's a pretty good reason to not add the reverse battery protection....he should definitely sell some type of add on chip for it though for people that custom make their mods


Sent from my iPhone using Popcorn

Yeah kinda like the charger is a add on.

 

[matador]

I guess that's a pretty good reason to not add the reverse battery protection....he should definitely sell some type of add on chip for it though for people that custom make their mods


Sent from my iPhone using Popcorn

Yeah kinda like the charger is a add on.

I've been playing around with schottky diode's. I think I can come up with something that will work for the reverse polarity protection. Once I get it figured out I'll start implementing it into all my mods.

 

[itsrayray]

I've been playing around with schottky diode's. I think I can come up with something that will work for the reverse polarity protection. Once I get it figured out I'll start implementing it into all my mods.

Could we send a existing mcm in for upgrade? Lol.


Side note, went to b&m the other day, ask me what I have inside it, a 10ml bottle? Nope, DNA20.

Why would I have a 10ml bottle in there when I have a kfl+ on top that holds 4.5ml.

 

[THnCS]

Just got notification the 2nd MCM30 has been delivered!! Nice only being 60 or so miles away from the Matador himself!!

I am not feeling well, do I look like I need to go home from work early today??

 

[fm92872]

Unfortunately I have to wait until Saturday. You know TH now that you mention it you are looking a little peaked.

 

[THnCS]

Unfortunately I have to wait until Saturday. You know TH now that you mention it you are looking a little peaked.

Looks like my MCM Fever got the best of me. Had to leave work early to get my medicine. Matt, This is an exceptional piece of work you have here. Great size, alot smaller that I thought. With that Kayfun clone, it is about 3/4 to 1in taller than my SVD in 18650 mode, with nothing on it!

Just playing around and think I have found my sweet spot. 1.6 coil in the Kayfun clone, around 23watts. Nice warm yummy vape.

Anyone on the fence, kindly send Matador your money. You will not be disappointed.

Now for the PORN!!!

 

[fm92872]

I was thinking of what I should grab to put on top of mine. TH you recomend the kfl?

 

[fm92872]

Need something easy to rebuild.

 

[THnCS]

FM92872,

I love my KFL clone. We have a great B&M here in C/S. A few of them have the real KFL and loved them, they got a couple clones in so I said sure why not. It honestly is the best Vape I have had, been doing this for almost 3years. The flavor to me is even better than a traditional RBA. Something about that chamber that just slams everything into your mouth( not sure if that sounds right) Might not be right, but true!! Now with the MCM30, that 23watts gives me a really good warm vape.
The clone is so good, I will be looking for a real KFL. Everyone in the B&M shop tried it, they all said the real one 10/10 and the clone is right there at a 9-9.5/10. Needless to say, they had 5 clones in stock the other day, they are now all gone!! LOL I hate buying clones, but $50 compared to $140 is one of the reasons I had money to get this MCM30.

I am not really concerned with how my mod and atomizer/tanks look together. I want performance and quality Vape. This combo is awesome together in that regard.

 

[THnCS]

Need something easy to rebuild.

The KFL is really easy to build on. Kind of a pain to fill, but worth it. I have no experience, but watched quite a few youtube vids on the Squape. They are say even better flavor and easier to build than the KFL. I do beleive the squape has a clone too.

The KFL, you have to drain your juice to rebuild. The Squape, you can unscrew the atomizer, set the tank aside, then attach it all without draining your juice. You only drain the juice when you want to change flavors.

PLus the KFL holds like 4mils of juice and the Squape holds 5 mils!!! Can't beat that.

 

[natzakaria]

How do I get one of those 30s.
I will only be in the states till 28th Jan

 

[Crocky]

Looks like my MCM Fever got the best of me. Had to leave work early to get my medicine. Matt, This is an exceptional piece of work you have here. Great size, alot smaller that I thought. With that Kayfun clone, it is about 3/4 to 1in taller than my SVD in 18650 mode, with nothing on it!

Just playing around and think I have found my sweet spot. 1.6 coil in the Kayfun clone, around 23watts. Nice warm yummy vape.

Anyone on the fence, kindly send Matador your money. You will not be disappointed.

Now for the PORN!!!

That looks great! Can we get a pic of it in your hand to get a size comparison? If it is too much trouble I totally understand

 

[THnCS]

Here you go. Hope that helps.

 

[itsrayray]

 

[scrappy]

Wow that looks fantastic.

 

[Crocky]

Great! Looks like they fit nicely int he hand, Hard to tell sometimes by just pics of the mod. Now just a wait until we see some more DNA 20's. Hoping there will still be some of these even after the DNA 30 chip has now been introduced.

 

[kokamojo]

Well, since we're all sharing.

 

[fm92872]

Don't have anything worthy of pics to put on top yet. As soon as I do I'll get a pic up.