Merged old sticky threads (2)

[Tecratk]

You can purchase an 801 to 510 adapter from Altsmoke.com and use it with your Janty Stick. It's small, but it fits just enough so the tip of the cart is sticking out of the Janty Stick, allowing you to vape comfortably. The trick is to screw the 510 atty really tight into the adapter, and then lightly screw the adapter into the Janty Stick. Do not screw it in tight.. just keep turning it a little until it starts vaping, otherwise you can risk losing the adapter in the Janty Stick. I have one and I use it all the time. Worst case scenario if it gets stuck, you just pop off the case and unscrew it. I have never had this happen though and it shouldn't as long as you're careful and don't screw it into the Janty Stick tight...

http://www.altsmoke.com/modshop/801adapter.html (make sure to pick the 801 to 510 adapter)

If you wanted to get really creative, you could purchase an 801 to 510 and then a 510 to 901 and use 901 attys on your Janty Stick.

 

[Mik_Janty]

Hey Dale,

The Jantystick v3 could be coming this year, but i cant guarantee anything- - it depends on alot of things. The second i have more info i will say so.

For the Jantystick XL ( multivolt, selectable ) it will come next year, - early i hope.

 

[Quitter]

The only concern I have about the Altsmoke adapter is that it buries the 510 atty in the JS case. As you all know, those 510's run really hot. I think 510's rely to some degree on air cooling. I'd be concerned about really cooking the atty in the JS case. I'm gonna hold out for the Janty adapter. It still puts the 510 atty in the case a bit but it doesn't bury it.

Just my .02

 

[VapeApe]

I was contacted by Ethan, from Janty, on Monday 10/12. He suggested I try the same things as previously mentioned, loosening the atty and trying a new one. He told me a replacement was on its way and to send back the defective stick upon receipt of the new one. This is good customer service, as I would expect from a great company like Janty. I cant wait to get the new stick. Thank you for the replies and the suggestions.

 

[steven.rn]

ZZzzzZZzzzzzz.... october 15th and no news. I'm kinda getting tired of waiting for a 510 adapter to use a better battery with, and today my Mrs. told me to just go buy a mod with an 18650 and be happy because all our dura batteries are getting old and used. I'd hoped to use the stick with a 510, but give up week has arrived tomorrow :-(. Gotta do something, and I just can't see going to less than a 10440 batt- even 360 maH is at the small end of the scale; but the USB on the stick makes up for it. Argh.

 

[vaporboy]

Janty 510 adapter is available now at smokejuice.co.uk. Hurry, only 18 left.

 

[BiteMe]

Mik...

You're killing me Dude!!!!
I finally get to the point where Janty Cappuccino is my all time favorite liquid, and you go and change dealers! Can you assure me that the "new" cappuccino will be the same as my favorite?
Additionally, I realize that 2010 isn't that far away, but for the love of all that's Holy!!!!! The wait for your new products is cruel and inhumane punishment!!!
I waited for the Dura-C. I waited for (and pre-ordered) the Janty Stick. and now, I'm gonna end up waiting for the Baby-J and or whatever you decide is the first high voltage device.
Please!!!! Just hurry up and take my money!!!



I'm just teasing you about the wait, but really am anxious to see a high voltage unit from you guys!

 

[Kelemvor]

i'm on the same train as Biteme52, as i wrote in my review on the europeanshop: don't change the cappuchino in any way. my wife was so happy that she found her 1st liquid that actually had an more than acceptable taste, without that she would not have quit analogs.

so i fear the next order will be a single bottle to test if its still "the right stuff".


PS: mik you forgot the ladies

 

[cassavetes]

I ask because I ordered a JS for an upcoming trip and am worried it will not get here in time.

It shipped out on Tuesday the 13th and I leave on Monday the 19th.

Any info would be greatly appreciated.

 

[ladyraj]

3 days usually!

 

[cassavetes]

Hooray. Thanks, Lady. = )

 

[Kelemvor]

and i thought the dura cart already feature this. it is more important to stop the slight leaking on the dura carts ... just my opinion.

 

[Mik_Janty]

Hey guys (and ladies);

First off, yes the wait is intolerable. I mean you are waiting to buy a new ecig, im waiting to see my ecig design being launched all over the world. Trust me, I feel you - I haaaate to wait, but we need to do this to make it right.

I mean, im pretty nervous about it too - what if you hate it. What if it breaks down every 2 minutes, even though ive done my best in designing it for lasting? =)

So.. phew.

Anyway, regarding the liquid, im afraid i dont know yet - i dont know much about the liquids i must admit: but yes, i think our manufacturer is using the same recipes!

 

[Mik_Janty]

Hey guys, and gals:

Well its quite a genious design ( pads self on back ) - its simple, and it works.

For those two reasons i cant post it here, cause.. it would be rather easy to duplicate: Better to be first on the market with it.

The airflow in this is actually better than that of normal carts. And it really shines when you use it on long drags, hard drags, or high voltage.

 

[Argent009]

They do need to start talking to people on the JantyWorld site, some folks are switching to other suppliers because of a lack of support, that's a shame.

 

[SheerLuckHolmes]

You've lost me. I have never, ever gotten juice in my mouth from dripping.

Topping off a cart, yea, I've gotten juice-mouth lots of times, but how on earth could anyone get juice in their mouth via dripping unless they are dripping directly into their mouth??????

 

[thewomenfolk]

Ummmmm....I think the Janty does not 'leak' per se. I think I did overfill my cart. My solution? I'd never taken the atty out, so I did that, and cleaned it with a few swipes of a wet washcloth as it was greasy with juice. Then I threw away the filler in my cart and started over. I used a straw mod and the pyramid teabag and WA...LAAAAA, it's all working famously again!

I'm careful now not to over-topoff with the juice....I'm getting loads of vapor. I love this thing! Thank you Mr. Janty!!!

 

[NekoGurrl]

From another post I ran across, AltSmoke has them. But I'm a little confused as to how they'd work; They look small in the picture, and I don't see how they could reach all the way down in the JS.

They do work, however they are to short and the 510 atty is completely inside the stick with less than 1/2" of the cart sticking out. Not practical for long term use.

I'd be sad to see Janty go, the Dura was my first PV, then the Stick. Still love their classic atomizers, but I have moved on.

 

[Rexa]

Great. Maybe i'll try it when it's out. For now, both sticks (V1 and V2 which replaced broken V1) have landed in the garbage due to sheer flimsiness.

 

[youngunner]

janty stick XL- have any other info on that which you would be willing to share?