Merged old sticky threads (7)

[Mighty Cowphin]

unique design and a fully integrated juice feeder

 

[fleeing]

The new site looks nice but is initially confusing.
An automatic link to bring existing customers from the old URL to the new one would be a very good idea. At least if you want old customers to return!

I'm very disappointed that several liquid flavours have again disappeared from the european shop (pineapple, cola, rum I'm sure there are more). I rate Janty liquids as among the best, but don't see why I can't order the whole range of flavours. Isn't it about time Janty started supplying liquid in 30ml bottles?

Good luck ironing out the bugs! I'll wait to re-order till the missing flavours are available again.

 

[CatVTTV]

daniel, I have used the TW ones, not in the JS, but on another ecig I have, its perfectly fine.

I personally do not like the ones, or adaptations to make the atomiser touch the cart filling. it can cause burning of the juice, filling and even cart. I prefer the juice to gently wick, which it does by either slowly seeping down the sides to the base of the atomiser, or by dripping down.

The problems come when we constantly vape, without giving time to the process of wicking the juice.

When using shorter atomisers such as the Dura (510) wick and atomiser do touch, so keeping it damp is important, but because the liquid has not got so far to travel, waiting between vapes is not so important.

Give this is a try... after a few inhales, leave the ecig in an upright position for a couple of minutes before vaping again... and just see the difference.

 

[CatVTTV]

I bought a couple of batteries along with the Stick back in June, all are still working very well. However, I prefer to use the charger rather than the USB cable.

 

[Dorian_Gray]

I should buy another stick while I wait?

 

[Dorian_Gray]

has been GREAT. I can't say that I have received all my products from them without any issues, but I CAN say that Ethan (and his crew) will bend over backwards to make you happy. Just write him an e-mail!

 

[Kelemvor]

these infos are a lot better than Ludos teasers

i hope you don't forget about the Dura, now that you have big 280mAh Batteries for it,
it would be wise to deliver a new, bigger charging case, for at least 2 normal or Mega Batteries, 2 Atomizers, 2 Carts.

and maybe an emergency atomizer connector at the bottom, would be nice.

oh, thats the other thing you are working on ? never mind

 

[Kelemvor]

one thing about the us - shop. is it a bug or by intention that you charge for the minifogger that much more than for the dura ?

 

[Mik_Janty]

these infos are a lot better than Ludos teasers

i hope you don't forget about the Dura, now that you have big 280mAh Batteries for it,
it would be wise to deliver a new, bigger charging case, for at least 2 normal or Mega Batteries, 2 Atomizers, 2 Carts.

and maybe an emergency atomizer connector at the bottom, would be nice.

oh, thats the other thing you are working on ? never mind

Hehe =)

Well, we are working on stuff regarding the Dura, but then again we are actually working on everything .. so... ;

 

[WorldPax]

Nice job Mik, that's all I was asking for. Think I may throw caution to the wind, order a Stick and just see what comes out on the Cameo. If it turns out to be a compact 5V using the 510 atty then I'll have one of those too.

 

[Mik_Janty]

Doubt it seeing how Janty thinks above 5 volts e-liquid can be toxic.

Well we didnt say it WAS toxic, - but the whole idea of why e-cigarettes are not harmful is that the liquid is not being heated above a certain point. Thats why glycerine is so good; it doesnt require alot of heat to become "smoke".

Also you have to remember that we sell the atomizers too and warranty them; One 801 atomizer has a scheduled life of 100.000 hits. If you put this to 6v, it wont be half that, it will be much much less, due to the constant dry burning that will occur quite often, no matter how careful you are.

And that will lead us to receiving a ton of warranty requests.

Imagine it right now; People are vaping 3.7 volts - some are experienced some are not, and we still get alot of people frying their atomizers due to burning them too dry. What if we did deliver 6 volt and say my mom bought it, she would not only fry the atomizer, but probably the entire casing as well.

So im not saying yes or no to anything, just trying to shed some light on why Janty has not made a highpowered device yet - if we are to do one (again not confirming or denying.. damn i feel like a lawyer.. ) then we have to keep the whole perspective of warranties in sight also - and ofcourse make it as safe as possible to use.

 

[TDM]

Well we didnt say it WAS toxic, - but the whole idea of why e-cigarettes are not harmful is that the liquid is not being heated above a certain point. Thats why glycerine is so good; it doesnt require alot of heat to become "smoke".

Ok thanks. Thats makes it clearer??

The whole issue of high voltage actually has alot of issues - when certain liquids are heating beyond so and so many degrees they can become toxic - this is why all the e-cigarettes that are tested "safe" are not 5volts. Just for your information =)

 

[Bosneeda]

Thanks all guys !!

but I had a little porblem when I tried to wash my atty ! I use the cappuccino Janty flavor, I have another which is the vanilla flavor I want to try and after a great deal of washing it seems like the smell nor the taste won't go away ?

any suggestions ?

 

[Quitter]

Mik - any update on the 510 adapter? Is Janty still working on it?

 

[nubee]

It has no sharp corners what so ever

so... it's round? like ball? or like a football? i is confused... that "picture" from before looked like it had at least 2 flat sides.

How I 'see' it is like this:

Take the JStick and put a second batt next to the first one and you get a triangle setup.
So 2 batts with the hole for the atty (like the current JStick) and you're done!

 

[Mik_Janty]

How I 'see' it is like this:

Take the JStick and put a second batt next to the first one and you get a triangle setup.
So 2 batts with the hole for the atty (like the current JStick) and you're done!

Exactemundo.

And the "no sharp corners" means that everything is rounded off - not like on the jantystick where you do have corners that are sharp and can be quite annoying. Its very rounded, and soft.

 

[Mik_Janty]

has been GREAT. I can't say that I have received all my products from them without any issues, but I CAN say that Ethan (and his crew) will bend over backwards to make you happy. Just write him an e-mail!

The kid in me, reaaaally wants to believe that Ethan is receiving tons of emails now, - not about Janty stuff but just "sooo.. hey how you doing. Yeah i just bought a new car, and its red.. and uhm.." - completely flooding his mailbox.

*muhaha*

 

[nubee]

has been GREAT. I can't say that I have received all my products from them without any issues, but I CAN say that Ethan (and his crew) will bend over backwards to make you happy. Just write him an e-mail!

HEAR HEAR!

Ethan ROCKS!

 

[Nepenthy]

Thanks, Mik. Have a couple old high bridge 801's to get my through, but man I miss the lowbridge janty/TAWA. The JS really spoils you on other models. I have several Duras and minis that used to suffice just fine and now they are like breathing air compared to the JS. Good and bad I guess, bad when your atty dies and you have to fall back on something inferior!

 

[VaporX]

Just wondering if you are on track for shipping orders that came in while you were away.

saw the one post they would be sent tuesday, but no shipping notice here yet.(and i cant login to check there, expired session error, yes i cleared cookies and all that and tried IE and firefox)

let me know if you need an order #

Thanks