Can we stop calling it the Fireluke Mesh Pro? It just adds to the confusion imo.It's the Fireluke, Fireluke Mesh (different coils),Fireluke Pro, and the Freemax Mesh Pro.
Mesh Coil Tanks? What Say Ye'?
- Thread starter Vapemesilly
- Start date
- th_trl_thread_readers 0
- Status
Can we stop calling it the Fireluke Mesh Pro? It just adds to the confusion imo.It's the Fireluke, Fireluke Mesh (different coils),Fireluke Pro, and the Freemax Mesh Pro.
Yes, I am guilty! My bad.
But easy mistake given Freemax’s creative (or lack of) naming. Damn good thing we are not talking about Smok tanks. Fireluke Baby Mesh Prince Pro tank!
To be clear I think Freemax is totally responsible for the confusion. I don't really understand what they were thinking.
Confusing customers is certainly not something I would want.
Confusing customers is certainly not something I would want.
I have gone through 60ml on the dual and it still tastes as good as it did on the first puff.Never gurgles or pops.Just a smooth enjoyable vape.I love this Mesh Pro!
I have used the triple mesh, dual mesh and the sex-tuple Firelock (not mesh)
Love both the triple mesh, dual mesh (like the triple a little better than the dual) did not like the sex-tuple Firelock (non mesh)
Fireluke is what I'm referring to
Have about a month on the Fireluke Mesh coil. Hard to judge it’s longevity - even though I use it daily, it does not get constant use.
Same with both the dual and triple mesh for the Mesh Pro tank. The dual that came with the tank does have life left in it, but I couldn’t wait for it to die before trying the triple.
My Cascade Baby tank still has it’s original mesh coil which is going on 2 months now. Again, used daily but not constantly.
Same with both the dual and triple mesh for the Mesh Pro tank. The dual that came with the tank does have life left in it, but I couldn’t wait for it to die before trying the triple.
My Cascade Baby tank still has it’s original mesh coil which is going on 2 months now. Again, used daily but not constantly.
Where he mentions about the cotton catching fire? Never! Can’t see this being an issue if you properly prime your coil and don’t let it run dry.
Really enjoying the Freemax Mesh Pro.
I've had it about a week now. I've tried the single, dual and triple coils, one each. I find the single coil to on par with Vaporesso's mesh coil for flavor. The dual coil has significantly more flavor so far. Had a bad run with the triple coil, it burnt very quickly.
On the triple coil my guess is it may have been a bad coil. I primed it from the inside until I saw juice in the juice holes on the outside of the coil so I'm confident the cotton was saturated. After priming I installed it in the Mesh Pro filled the tank and let it set for 30 minutes. Took several unpowered hits with airflow closed, started it at 30 watts and raised it 5 watts every 8 to 10 hits until I got to 50 watts. Halfway through second tank it was producing burnt flavor.
The single and dual are performing great. I will try a different box of the triple coils when ready to change juice.
If the Mesh Pro keeps delivering this level of performance it will replace my NRG tanks in the house.
My 2 complaints about the Mesh Pro:
1) If you need to change a coil mid tank you need to use a syringe to suck the juice out or sacrifice it since the Mesh Pro has no chimney
2) With the single coil when I would go from and air conditioned space to the outside heat here in Tampa the Mesh Pro leaked like a sieve. I kept it inside for 4 days without a single drop leaking out. Went out once today with the Dual, no leaking. To soon to tell if the leaking issue is real.
Overall very satisfying, especially the flavor.
I've had it about a week now. I've tried the single, dual and triple coils, one each. I find the single coil to on par with Vaporesso's mesh coil for flavor. The dual coil has significantly more flavor so far. Had a bad run with the triple coil, it burnt very quickly.
On the triple coil my guess is it may have been a bad coil. I primed it from the inside until I saw juice in the juice holes on the outside of the coil so I'm confident the cotton was saturated. After priming I installed it in the Mesh Pro filled the tank and let it set for 30 minutes. Took several unpowered hits with airflow closed, started it at 30 watts and raised it 5 watts every 8 to 10 hits until I got to 50 watts. Halfway through second tank it was producing burnt flavor.
The single and dual are performing great. I will try a different box of the triple coils when ready to change juice.
If the Mesh Pro keeps delivering this level of performance it will replace my NRG tanks in the house.
My 2 complaints about the Mesh Pro:
1) If you need to change a coil mid tank you need to use a syringe to suck the juice out or sacrifice it since the Mesh Pro has no chimney
2) With the single coil when I would go from and air conditioned space to the outside heat here in Tampa the Mesh Pro leaked like a sieve. I kept it inside for 4 days without a single drop leaking out. Went out once today with the Dual, no leaking. To soon to tell if the leaking issue is real.
Overall very satisfying, especially the flavor.
I've tried all three. No leaks and excellent coil life from all of them. The dual mesh seems Ike the best compromise for me between flavor and juice consumption. The triple is a little better on flavor with the air turned down about a third, but I can suck half the fishbowl glass down in less than an hour.
On all three of the triple coils they sent me the small o'ring around the bottom was not in the groove.Be sure that oring is in the correct place before using them.
I just noticed in the new products section here the Freemax is releasing a quad mesh coil now. The coil wars will never end.
I bought 6 - 3 packs of coils 2 each single, double and triple. None of the 18 coils had the o-ring in the groove. It appears their are multiple grooves, my guess is these coils in other thanks may need the o-ring in one of the other grooves. I've been placing it in the upper most groove for the Mesh Pro tank, must be right the tank isn't leaking.On all three of the triple coils they sent me the small o'ring around the bottom was not in the groove.Be sure that oring is in the correct place before using them.
Yup, it's the top groove. All of mine came with them loose as well. Not a biggie so long as you're aware of it.
Finally gave the single coil that came installed a trial. Toasted the first one when I hit the fire button for like a half second (literally flame and all). Got the second one primed without needing the fire department. If I turn the air down to about a third open I get a nice vape with it. I may have to revisit the SS ones I had which disappointed me in TC.
Finally gave the single coil that came installed a trial. Toasted the first one when I hit the fire button for like a half second (literally flame and all). Got the second one primed without needing the fire department. If I turn the air down to about a third open I get a nice vape with it. I may have to revisit the SS ones I had which disappointed me in TC.
Can’t comment on the Freemax SS coils, Interested in them but never used one. However, here’s a good video from DJLsb and John, one of the evil genius’s behind Evolv, that goes into detail on the challenges with TC which includes the inconsistency with drop in coils. The interview starts at the ~13:00 mark if you wish to skip ahead
- Status
Similar threads
- Locked
