MINI T-3 COMING SOON! Introducing the X2- T3 Clearomizer & Other clearomizers - IN STOCK!!

Status
Not open for further replies.

kico166

Super Member
ECF Veteran
Umm - sometimes when SI has shown orders 'still processing' I've found it on the way by going directly to the USPS site & paste the tracking number in. Drat, missed the sale!

Love love love the Smoothol! Apple Breeze isn't bad. I would like it better w/ a stronger flavor as it's a good pallet cleanser!


Sent from my GT-P3113 using Tapatalk 2
 

kico166

Super Member
ECF Veteran
Just got mine. It's working out great so far. Keeping up with my chain vapeing at 4.3 v. Flavor is good, probably need to give it some break in time, but I'm glad I decided to pick these up. Even after I had gotten some changeable head clearos.

4.3 v? What are you using?

Sent from my GT-P3113 using Tapatalk 2
 

opal

Ultra Member
ECF Veteran
Verified Member
Oct 3, 2012
2,326
7,154
mine's full when I'm getting the spatter

anyway... I decided I needed to do a serious comparison of delivery devices so I loaded up my fave first thing in the morning juice.. a 12mg cafe coffee juice in a carto, a nano, a clearo and the T3. I get the best result from my clearo.. nice warm full flavor vape. The t3 makes lots of vapor but the flavor is very thin to me.. even with 2 holes covered. The nano gets second place because it's draw is a little tighter than the clearo... but I still get full warm flavor.
T3 is a surprising 3rd, and very close to the carto in 4th.. getting the higher rank mostly because I don't have to fill it as often as the carto.
Has anyone compared a juice in it's standard form to one with an extra flavor shot in the T3 yet?
I'm thinking this might be a solution.. but maybe not.. and maybe those min's I have been seeing will get the warmth and flavor closer to my tongue..
 

JoAnnW

Vaping Master
ECF Veteran
Verified Member
Oct 19, 2012
4,602
13,011
B'more MD
mine's full when I'm getting the spatter

anyway... I decided I needed to do a serious comparison of delivery devices so I loaded up my fave first thing in the morning juice.. a 12mg cafe coffee juice in a carto, a nano, a clearo and the T3. I get the best result from my clearo.. nice warm full flavor vape. The t3 makes lots of vapor but the flavor is very thin to me.. even with 2 holes covered. The nano gets second place because it's draw is a little tighter than the clearo... but I still get full warm flavor.
T3 is a surprising 3rd, and very close to the carto in 4th.. getting the higher rank mostly because I don't have to fill it as often as the carto.
Has anyone compared a juice in it's standard form to one with an extra flavor shot in the T3 yet?
I'm thinking this might be a solution.. but maybe not.. and maybe those min's I have been seeing will get the warmth and flavor closer to my tongue..

I put buttery nipple with extra flavor shot in T3... doesn't compare to what I get from X2 clearo. Maybe the difference is I favor the warmer vapor from top coil? Alas... washed my T3's and put away. For me, they don't come close to what I get from the X2 clearo's. They are my #1 favorite by far, especially with the flat tips.
 

awsum140

Resting In Peace
ECF Veteran
Verified Member
Jun 12, 2012
9,855
46,386
Sitting down, facing forward.
A warmer vape will result in a "stronger" flavor. Think of ice cream for example. We eat it semi-frozen and it's just sweet enough, but let it warm to room temperature and it becomes overpowering with sweetness. The same thing seems to happen with vapor. I like a cooler vapor and I do notice a difference in flavor between a clearo and a T3 using SI RY4, but then they're both different, stronger, than a CE3 or carto. Looking at the whole picture, I like the T3 for flavor, vapor and not needing to fill it very often at all. Next up, for me, is the CE3 for flavor and vapor plus the real convenience of being able to use it no hands on an auto 78mm.

I haven't run into the gurgling that some have been reporting. I've been using Kangers for over a month and an SI for over a week now. They do "pop" a lot as the liquid wicks in and hits the hot coil, but that happens with the CE3 as well and makes me think it's a characteristic of bottom coil devices. It doesn't seem as noticeable in a carto, I think, because the filler mutes the sound, but I have heard it from them as well. Every once in a while I can hear it on a clearo. Have any of you who are reporting the gurgling tried blotting out the air tube with a pipe cleaner to see if it's actually liquid or more like condensation?
 

awsum140

Resting In Peace
ECF Veteran
Verified Member
Jun 12, 2012
9,855
46,386
Sitting down, facing forward.
I do like the clearos but I like the CE3 and T3 a little more. Until the T3 came along I was a clearo fan without a doubt, but then the design was changed on the clearo and it just isn't as durable as the original design. Now, the same thing has happened to the CE3, a design change. I haven't used the new CE3s yet, but will be filling a bunch tomorrow. I do hope they don't leak and work like the original design or I'm going to be a "little" disappointed to say the least. So far the only thing I haven't like is the Nano which I nicknamed the "ohno".
 

opal

Ultra Member
ECF Veteran
Verified Member
Oct 3, 2012
2,326
7,154
I do like my little nano's.. and for the price - if you want a vessel for a new juice you have not tasted yet and don't want to commit a clearo - yet.. I find them the easiest to load.. esp since I don't want to mess with a syringe. Hubby just had to try the CE3s.. guess who has to fill them for him..arighghghghg

I wish there were some USA manufacturers that would get in this game.. price might go up but I betcha quality control would be MUCH better.
 

WorksForMe

Ultra Member
Supporting Member
ECF Veteran
Verified Member
Sep 21, 2012
2,022
4,778
N.N., Virginia
I wish there were some USA manufacturers that would get in this game.. price might go up but I betcha quality control would be MUCH better.

Be careful what you wish for. Two American “Big Tobacco” companies are getting into e-cigs, and who knows what they’ll do.

J.R.
 

awsum140

Resting In Peace
ECF Veteran
Verified Member
Jun 12, 2012
9,855
46,386
Sitting down, facing forward.
Opal, I found out, rather quickly, that the easiest way to fill CE3s is in bulk. Just get a 5ml or 10ml syringe with a blunt, 20ga, tip and filling them becomes a breeze. Now I only fill once a week or week and a half, doing 20 or 30 at a time. I also cheat when filling the bigger syringes by using a 14ga blunt tip needle to pull the juice into the syringe. Way faster and far easier than filling cartos but still more time consuming than a T3, clearo or ohno.
 
I just got mine and all I can say is "Wow!" The flavor is perfect, they don't discolor the liquid like the top feeder did, and they're going to be a snap to fill and clean.

I do like a tight draw, so a drop of clear nail polish on 2 of the 3 holes to block them was in order. That worked perfectly.
 

Bimini Twist

Twisted Member
ECF Veteran
Verified Member
Dec 27, 2012
1,661
5,843
67
Redneck Riviera
www.mboyd.com
Have any of you who are reporting the [T3] gurgling tried blotting out the air tube with a pipe cleaner to see if it's actually liquid or more like condensation?

I got some gurgling immediately after a refill and used a rolled up tissue to clean out the air tube. In that case, it was definitely juice - I must have spilled some in the tube while refilling it. Other times throughout the day, I occasionally get some gurgling. This happens most often if I get into a chain vape episode. I haven't tried cleaning out the tube in those instances, but I suspect it is condensation. It can usually be cleared up and/or prevented by continuing to draw for a second or so after releasing the button. Not sure how one would do that with an automatic, though.

[Edit] Forgot to mention that my T3 has never leaked onto the battery.
 
Last edited:

Skyblues

Full Member
Dec 9, 2012
17
8
71
Parker, Colorado
Greetings,

I recently got my new SI T3s and love them. They work perfect on my X2 batteries but I would also like to use them on my eGo-Twist. The problem is, the T3 does fit on the eGO because they both have eGO threads but the problem is that there is about a .25" space between the center post of an ego and the receiving post on the bottom of the T3.

What kind of adapter do I need to use my SI T3 on my eGO-Twist?

Thanks
 
Status
Not open for further replies.

Users who are viewing this thread