more vapor

[D.WILL]

Hi every 1 is there any tricks to get more vapor from my set up ? I got a chi-you clone and a protank 2 1.8 ohm coil I do want to get in to rba's but do I need to get a ohm meter or can I use an ohm calculator app and there is an app called vapor tool box that shows you how much to cut the wire to get a pacific ohm so if any one knows

 

[Steam Turbine]

Number 1: Don't rush into rba's + mechs without reasearching first.... It is a dangerous combination if you are not knowledgeable about them.

Number 2: Read about battery safety

Number 3: Baditude will show up and send you links to his blog..... READ THEM CAREFULLY.

Number 4: READ BADITUDE's BLOG CAREFULLY

Number 5: READ BADITUDE's BLOG CAREFULLY

Number 6: Yes you need a multimeter and ohm's law calculator. They are not the same thing... You will use them both

Number 7: Enjoy!!!!

 

[Chas F.]

If you are going to get into rebuilding, you will have to have some way of checking the resistance of your build. A multimeter will work as well as some of the ohm checker boxes that are on the market. While you can calculate an approximate resistance, the best method is with a multimeter or something similar.

I use a PT II and rebuild my own coils with cotton and microcoils which helps in both flavor and vapor production. If all you're looking for is more vapor you can go to 100% VG, but I prefer to taste my juice and PG delivers more of that.

 

[CloudsOfTodd]

The only way to get more vapor from your 1.8 Pro-tank is increase VG (Potion Vape has some great, and flavorful 100% VG juices). RBA is the way to go to increase your clouds, but as the others have mentioned above, research and learn and DO NOT skimp on the required tools as your safety is important to all vapors!!

 

[heatX]

Once you have done your research on RBAs and Battery Safety, I would highly recommend checking out the Trident from Grand Vapor. They just came out with the V2 and it will produce allllll the vapor you want!

 

[dice57]

Yes, rba's is the ticket to more vape. As mentioned, an ohm meter is necessary. You might also want to get a evolv kick 2, so that you can regulate your mech mod, the kick 2 accepts builds from .5-3 ohms and is adjustable from 5-15 watts. Give you all the protection of a regulated device and gives a great consistent vape. The best rba that I have in my arsenal is the Uvo Systems Aqua. As with everything, rba's have a learning curve, and must be approached with care. Check out the micro coil build thread to get started on the right path. Also check out the rba subforum to see all the types available. Find the style you like best, and something that looks doable to you. Aqua, kayfun, Taifun, The Rose, Trident, SQuape, Ithaka, are just a few.