Mr Vape Chit Chat / General Discussion of Our Handmade Products

Status
Not open for further replies.

TopNotch

Unregistered Supplier
ECF Veteran
Mar 20, 2012
1,291
3,472
Charlotte NC
www.mrvape.com
I am waiting...as patiently as possible. I might wait for that euc. burl though...maybe...depends on how pretty the mango turns out...hmmm....

But, what if I wait on the burl, and then decide I like the mango better but it is gone! Dilemmas!!!!!

Choices, Choices. I will make sure as long as my supplier has mango that I have some in stock. The mango looks good so far, That burl looks good also but I'm letting it dry in a conditioned room and not rushing it. I will make sure to put pictures up of everything I get done as I get them done. Tommy
 

TopNotch

Unregistered Supplier
ECF Veteran
Mar 20, 2012
1,291
3,472
Charlotte NC
www.mrvape.com
The new pics of the finished Mora box that you gave away are gorgeous!

Must remember....patience....it is a virtue.... :)

Are you stalking me????:sneaky::rolleyes: I thought it felt like someone was watching me. I have been in the shop working hard to get the boxes I have cut out put together. I have a few Mango boxes along with Satin Wood,Bubinga,Figured maple,Sycamore,and Spalted Tamarind. I will be putting up pictures as soon as they are finished. The Eucalyptus Burl will not be ready this go around. I will be going by my wood supplier soon to see what he might have that looks interesting. Now the hard thing is figuring out what finish to put on all these boxes.Satin, Semigloss,or Gloss. I guess I will let the wood tell me what to do. Thanks for the compliment on the finished box.I like when you post something it keeps me on my toes and reminds me to keep going.:thumbs:
 

Mare1077

Vaping Master
ECF Veteran
Verified Member
Jul 31, 2010
3,161
5,490
Miami, FL
Me???? Stalking???? Why would you say that????

Ok...I have been stalking a little... :p I am just excited. I am very frugal because I have to be and this means that I don't buy mods. Currently, I have the bare minimum to keep me satisfied and off cigs. You sir, will get to be the manufacturer of my very first and possibly only mod. So, again, I am just excited! I just hope I don't wear out my welcome. :)

Oh yeah, I did have a question for you. I know I already asked it and of course you answered it, but I think it was in another thread, and I can't seem to find it now. What are the dimensions of the boxes?

Are you stalking me????:sneaky::rolleyes: I thought it felt like someone was watching me. I have been in the shop working hard to get the boxes I have cut out put together. I have a few Mango boxes along with Satin Wood,Bubinga,Figured maple,Sycamore,and Spalted Tamarind. I will be putting up pictures as soon as they are finished. The Eucalyptus Burl will not be ready this go around. I will be going by my wood supplier soon to see what he might have that looks interesting. Now the hard thing is figuring out what finish to put on all these boxes.Satin, Semigloss,or Gloss. I guess I will let the wood tell me what to do. Thanks for the compliment on the finished box.I like when you post something it keeps me on my toes and reminds me to keep going.:thumbs:
 

TopNotch

Unregistered Supplier
ECF Veteran
Mar 20, 2012
1,291
3,472
Charlotte NC
www.mrvape.com
Me???? Stalking???? Why would you say that????

Ok...I have been stalking a little... :p I am just excited. I am very frugal because I have to be and this means that I don't buy mods. Currently, I have the bare minimum to keep me satisfied and off cigs. You sir, will get to be the manufacturer of my very first and possibly only mod. So, again, I am just excited! I just hope I don't wear out my welcome. :)

Oh yeah, I did have a question for you. I know I already asked it and of course you answered it, but I think it was in another thread, and I can't seem to find it now. What are the dimensions of the boxes?[/QUOTE

You will never wear out your welcome. I would be honored to be the builder of your first mod. I know what it feels like to be on a budget. I am glad you are able to stay off of the analogs though. Talking about budget, Keep your eyes peeled we will be having a buy two get the third free on our E liquids. We were going to start the sale on Wednesday ( you know the hump day thing we do ) but we decided to start it tomorrow.
The dimensions of the boxes are 1 7/8" wide 2 7/8" Tall and 1" deep.they run on a single 3.7 v 14500 battery.
As soon as I finish the ones I'm working on I will be sure to post the pictures so you can see them. If everything goes well there will be 18 of them for you to see. Some of them already have homes, but at least there will be some new pictures to look at.
Thanks for your patience, Tommy
MrVapeMora6_zps3affe3df.jpg
MrVapeMora2_zps7b230908.jpg

MrVapeMora9_zps5e31adb9.jpg
 

TopNotch

Unregistered Supplier
ECF Veteran
Mar 20, 2012
1,291
3,472
Charlotte NC
www.mrvape.com
Mr Vape's buy two get one free sale starts now.
Here is how it works
Buy any two flavors of your choice at regular price and get a third flavor free
You can pick any flavor combination but all three bottles have to be the same size
Just put what you want the third bottle to be in the notes section. We will make the third juice with the same pg vg ratios and nic strength unless otherwise noted in the notes section
Sample packs are not included in this sale.
 

TopNotch

Unregistered Supplier
ECF Veteran
Mar 20, 2012
1,291
3,472
Charlotte NC
www.mrvape.com
I loaded up my did-a-like with Graham Cracker. It is very delicious in it.

That is great to hear. I'm glad you are enjoying our Graham Cracker. It is in my top ten favorite list. It's like eating the real thing but without the wax paper wrapper and all those crumbs. We just need to figure out how to make them taste like they were just dunked in milk and I think we would have something. I might just have to start working on that.:laugh:
I almost forgot to mention our buy two get one free sale. (If you haven't heard about it) so you can stock up
 

TopNotch

Unregistered Supplier
ECF Veteran
Mar 20, 2012
1,291
3,472
Charlotte NC
www.mrvape.com
So, it has been about a week and a half since I last asked, but how are the boxes coming along?

Applying finish to them and that will take a few more days. I know this process has taken a while. I haven't been able to give them my full attention. I should have had a few finished before I advertised them. I changed the design a few times and just went into production without building a prototype of the final box and it has been interesting. Here are a few pictures of the new 3.7v boxes being built. The little silver thing in the middle of the picture is a EVOLVE DNA 12 chip and there are some more hints in the picture of things to come.The boxes in these pictures are naked so I hope you don't mind a little box mod porn.:facepalm: These are the ones that are being finished right now. Hopefully the next time you see them they will be decent.:laugh: Enjoy
DSCN1635_zpsc67c00d2.jpg

DSCN1636_zps591fb62e.jpg

DSCN1637_zpsc79e63c6.jpg
 

TopNotch

Unregistered Supplier
ECF Veteran
Mar 20, 2012
1,291
3,472
Charlotte NC
www.mrvape.com
20% off storewide Halloween Sale!
Using Coupon Code: trickortreat

But wait, there's more!!

Everyone who places an order now through 11/2 will be entered into a drawing
to win a $25 gift certificate which can be used on anything on our site!!

The winner will be drawn Saturday 11/3 and will receive an
email that day announcing that they have won!

Good Luck to all!
 

Uncle

Resting In Peace
Supporting Member
ECF Veteran
Verified Member
Jun 15, 2011
32,527
116,462
THANKS - Mr Vape . . .:)

I posted this info in both the PIF Deals & Steals thread & PIF Contest thread too . . .

20% off storewide Halloween Sale!
Using Coupon Code: trickortreat

But wait, there's more!!

Everyone who places an order now through 11/2 will be entered into a drawing
to win a $25 gift certificate which can be used on anything on our site!!

The winner will be drawn Saturday 11/3 and will receive an
email that day announcing that they have won!

Good Luck to all!
 
Status
Not open for further replies.

Users who are viewing this thread