My homemade mini juicebox (the MrPuffer)

[MrPuff]

Well with all this talk of bans and litigation, combined with the fact I haven't been able to post updates about my mods, I am looking at other places to post where I won't fear a ban while in some limbo. I will still be around here but until something happens with my status I am just not having much fun and likely won't post much. Hopefully things get fixed soon. Seems like I picked a bad time to apply for supplier.

 

[highping]

Well I think you picked a good forum to go to while you're waiting MrPuff
I love the freedom allowed over there.
But you just can't match the sheer volume of vapers that are on ECF. Every other forum is a ghost town by comparison. I just wish it were a little more 'open' here

 

[Lightgeoduck]

Again Nice mod Mr. Puff... and I understand what you are going through and how you may feel.... I just wanted to put 2cents in... It does seem like more mod threads these days are pushing into the business side real quick..... (though people still share there ideas for the sake of modding) there was a time where the transitional gap form mod "show and tell" to open market was much wider.... if you go back in time to some of the ECF greats like Tinear and Cisco.... or the old time favorite Trog to name a few.


Yes this stuff grows quick and fast and to have a great idea to add on to a simple base unit... I guess you would have to be quick...... I understand wanting a more open environment to accomplish your goals... I also understand the thing about timing.... where like above mentioned sames harder to nail this day and age.....

I don't share too many of my ideas here,, because it seems like there are members that live in this sub-forum... and I feel... why double post in a sense and again I can't keep up with all the great ideas that are put out here.. to even find a time to post something useful .....

Hope to see you here from time to time.. even if it is just to share an idea.. of course that just sparks another thread of put me on the list posts ... (sometimes guilty) rather Hey let me try that

any way enough of my rambling... Good Job and wish you the best whether here or there

 

[MrPuff]

Well I think you picked a good forum to go to while you're waiting MrPuff
I love the freedom allowed over there.
But you just can't match the sheer volume of vapers that are on ECF. Every other forum is a ghost town by comparison. I just wish it were a little more 'open' here

I agree, ecf is huge and has some great people here too. I hope things get sorted out fast, I will be so happy to be able to share ideas here again. Big issue is a lot of my ideas are being applied to my current project so I can't really comment on those ideas as it would be talking about my product.

 

[Lightgeoduck]

well I understand clearer... missed the whole limbo thing in your previous comment..... so some of my last post doesn't have value

 

[MrPuff]

Again Nice mod Mr. Puff... and I understand what you are going through and how you may feel.... I just wanted to put 2cents in... It does seem like more mod threads these days are pushing into the business side real quick..... (though people still share there ideas for the sake of modding) there was a time where the transitional gap form mod "show and tell" to open market was much wider.... if you go back in time to some of the ECF greats like Tinear and Cisco.... or the old time favorite Trog to name a few.


Yes this stuff grows quick and fast and to have a great idea to add on to a simple base unit... I guess you would have to be quick...... I understand wanting a more open environment to accomplish your goals... I also understand the thing about timing.... where like above mentioned sames harder to nail this day and age.....

I don't share too many of my ideas here,, because it seems like there are members that live in this sub-forum... and I feel... why double post in a sense and again I can't keep up with all the great ideas that are put out here.. to even find a time to post something useful .....

Hope to see you here from time to time.. even if it is just to share an idea.. of course that just sparks another thread of put me on the list posts ... (sometimes guilty) rather Hey let me try that

any way enough of my rambling... Good Job and wish you the best whether here or there

Ill be around a lot more often than from time to time
I just needed to find ways to chat so I joined a few other forums. Haven't even brought up my product there and I don't think I will for a bit, I just like being able to bounce ideas around again.
I actually applied to become a supplier not because of my little project boxes so much but for my other unseen project. The way it is being made it just makes sense to sell them, and when you see it you will know why.

 

[Lightgeoduck]

Ill be around a lot more often than from time to time
I just needed to find ways to chat so I joined a few other forums. Haven't even brought up my product there and I don't think I will for a bit, I just like being able to bounce ideas around again.
I actually applied to become a supplier not because of my little project boxes so much but for my other unseen project. The way it is being made it just makes sense to sell them, and when you see it you will know why.

Well put me on the list

 

[darkmatter22]

I dont know MrPuff...unless they know and understand machine code like this I thing the learning code would be quite a task.lol

%
o04770 (12 5 05 t3 gimbal u-frame s7)
t1 m06 (.75 bm 4.0loc (checks position)
m00 (pocket left ,check 3.93 dim??)
g00 g90 g54 x-0.864 y0.1 s1000 m03
g43 z0.1 h01
g01 z-1.3 f50.
Y-0.1
g00 z0.1
x0.864 y0.1
g01 z-1.3 f50.
Y-0.1
g00 z0.1
g55 x-0.864 y0.1
g01 z-1.3 f50.
Y-0.1
g00 z0.1
x0.864 y0.1
g01 z-1.3 f50.
Y-0.1
g00 z2.
X-9.
G28 g91 y0. Z0.
M00
t18 m06 (1 in.end mill)
g00 g90 g54 x-1.56 y2.9 s3500 m03
g43 h18 z0.5 m08
z0.
G01 y-2.9 f25.
G00 x1.56
g01 y2.9 f25.
G00 z2.
G55 x-1.56 y2.9
z0.
G01 y-2.9 f25.
G00 x1.56
g01 y2.9 f25.
G00 z2. M09
t2 m06 (1/8c/d)
g00 g90 g54 x-1.69 y1.97 s6000 m03
g43 h02 z0.5 m08
g81 z-0.05 r0.05 f10.
X-1.465 y1.23
y-1.23
x-1.69 y-1.97
x1.69
x1.465 y-1.23
y1.23
x1.69 y1.97
g55 x-1.69 y1.97
x-1.465 y1.23
y-1.23
x-1.69 y-1.97
x1.69
x1.465 y-1.23
y1.23
x1.69 y1.97
g00 z2. M09
t4 m06 (.169 dr)
g00 g90 g54 x-1.465 y1.23 s3600 m03
g43 h04 z0.5 m08
g83 z-0.65 q0.06 r0.05 f10.5
y-1.23
x1.465
y1.23
g55 x-1.465 y1.23
y-1.23
x1.465
y1.23
g00 z2. M09
t7 m06 (.136 dr)
g00 g90 g54 x-1.69 y1.97 s4500 m03
g43 h07 z0.5 m08
g83 z-0.55 q0.07 r0.05 f11.
Y-1.97
x1.69
y1.97
g55 x-1.69 y1.97
y-1.97
x1.69
y1.97
g00 z2. M09
t9 m06 (.375 am flat nose)
(adj for .2c-s & .235c-s approx.)
g00 g90 g54 x-1.69 y1.97 s5000 m03
g43 h09 z0.5 m08
g81 z-0.065 r0. F15.
X-1.465 y1.23 z-0.09
y-1.23
x-1.69 y-1.97 z-0.065
x1.69
x1.465 y-1.23 z-0.09
y1.23
x1.69 y1.97 z-0.065
g55 x-1.69 y1.97 z-0.065
x-1.465 y1.23 z-0.09
y-1.23
x-1.69 y-1.97 z-0.065
x1.69
x1.465 y-1.23 z-0.09
y1.23
x1.69 y1.97 z-0.065
g00 z2. M09
t5 m06 (m4 tap rigid sf)
m00 (clear holes)
g00 g90 g54 x-1.69 y1.97 m42 s400
g43 h05 z0.5 m08
g84 z-0.4 r0.1 f11.024
y-1.97
x1.69
y1.97
g55 x-1.69 y1.97
y-1.97
x1.69
y1.97
g00 z4. M09
t6 m06 (m5 tap rigid sf)
g00 g90 g54 x-1.465 y1.23 m42 s350
g43 h06 z0.5 m08
g84 z-0.5 r0.1 f11.024
y-1.23
x1.465
y1.23
g55 x-1.465 y1.23
y-1.23
x1.465
y1.23
g00 z5. M09
t8 m06 (1 1/2 drill in shthold)
(remove clamps)
g00 g90 g54 x0. Y0. S500 m03
g43 h08 z0.5 m08
g83 z-5.05 f3.5 q0.07 r-3.17
g55 x0. Y0.
G00 z2. M09
t17 m06 (1.0 hog mill 4.0loc)
g00 g90 g54 x0. Y0. S1200 m03
g43 z0.1 h17 m08
m97 p40
g55 x0. Y0.
M97 p40
g00 z2. M09
t20 m06 (.75 hog bm 4.0loc)
(set z @ .002 above t1)
g00 g90 g54 x0. Y0. S1100 m03
g43 z0.1 h20 m08
m97 p50
g55 x0. Y0.
M97 p50
g00 z2. M09
t1 m06 (.75 ball mill 4.0loc)
g00 g90 g54 x-0.5 y0. S300 m03
g43 z0.1 h01 m08
m97 p55
g55 x-0.5 y0.
M97 p55
g00 z2. M09
x-9.
G28 g91 y0. Z0.
T1 m06 (.75 ball mill 4.0loc)
m00 (run to os .001 if needed)
g00 g90 g54 x0.8 y-1.8 s300 m03
g43 z0.1 h01 m08
m97 p60
g55 x0.8 y-1.8
m97 p60
g00 z4. M09
x-9.
G28 g91 y0. Z0.
M30
n40
g01 z-3.835 f200.
X-0.5 f10.
G19 g03 y1.44 z-3.334 r2.34
g17 g01 z-3.2 f200.
X0. Y0.
Z-3.835
x0.5 f10.
G19 g03 y1.44 z-3.334 r2.34
g17 g01 z-3.2 f200.
X0. Y0.
Z-3.835
x0.5 f10.
G19 g02 y-1.44 z-3.334 r2.34
g17 g01 z-3.2 f200.
X0. Y0.
Z-3.835
x-0.5 f10.
G19 g02 y-1.44 z-3.334 r2.34
g17 g00 z0.5
m99
n50
g01 z-3.942 f200.
X-0.855 f4.
G19 g03 y1.967 z-3.341 r3.517 f5.
G17 g01 z-3.2 f200.
X-0.4 y0.
Z-3.942
g01 x-0.692 f10.
G19 g03 y1.967 z-3.341 r3.517 f6.5
g17 g01 z-3.2 f200.
X-0.4 y0.
Z-3.942
g01 x-0.519 f10.
G19 g03 y1.967 z-3.341 r3.517 f6.5
g17 g01 z-3.2 f200.
X-0.346 y0.
Z-3.942
g19 g03 y1.967 z-3.341 r3.517 f6.5
g17 g01 z-3.2 f200.
X-0.173 y0.
Z-3.942
g19 g03 y1.967 z-3.341 r3.517 f6.5
g17 g01 z-3.2 f200.
X0. Y0.
Z-3.942
g19 g03 y1.967 z-3.341 r3.517 f6.5
g17 g01 z-3.2 f200.
X0.173 y0.
Z-3.942
g19 g03 y1.967 z-3.341 r3.517 f6.5
g17 g01 z-3.2 f200.
X0.346 y0.
Z-3.942
g19 g03 y1.967 z-3.341 r3.517 f6.5
g17 g01 z-3.2 f200.
X0.4 y0.
Z-3.942
g01 x0.519 f6.5
g19 g03 y1.967 z-3.341 r3.517
g17 g01 z-3.2 f200.
X0.4 y0.
Z-3.942
g01 x0.692 f6.5
g19 g03 y1.967 z-3.341 r3.517
g17 g01 z-3.2 f200.
X0.4 y0.
Z-3.942
g01 x0.86 f5.
G19 g03 y1.967 z-3.341 r3.517 f6.5
g17 g01 z-3.2 f200.
X0.5 y0.
Z-3.942
g01 x0.855 f4.
G19 g02 y-1.967 z-3.341 r3.517 f6.5
g17 g01 z-3.2 f200.
X0.692 y0.
Z-3.942
g19 g02 y-1.967 z-3.341 r3.517 f6.5
g17 g01 z-3.2 f200.
X0.519 y0.
Z-3.942
g19 g02 y-1.967 z-3.341 r3.517 f6.5
g17 g01 z-3.2 f200.
X0.346 y0.
Z-3.942
g19 g02 y-1.967 z-3.341 r3.517 f6.5
g17 g01 z-3.2 f200.
X0.173 y0.
Z-3.942
g19 g02 y-1.967 z-3.341 r3.517 f6.5
g17 g01 z-3.2 f200.
X0. Y0.
Z-3.942
g19 g02 y-1.967 z-3.341 r3.517 f6.5
g17 g01 z-3.2 f200.
X-0.173 y0.
Z-3.942
g19 g02 y-1.967 z-3.341 r3.517 f6.5
g17 g01 z-3.2 f200.
X-0.346 y0.
Z-3.942
g19 g02 y-1.967 z-3.341 r3.517 f6.5
g17 g01 z-3.2 f200.
X-0.519 y0.
Z-3.942
g19 g02 y-1.967 z-3.341 r3.517 f6.5
g17 g01 z-3.2 f200.
X-0.5 y0.
Z-3.942
g01 x-0.692 f10.
G19 g02 y-1.967 z-3.341 r3.517 f6.5
g17 g01 z-3.2 f200.
X-0.5 y0.
Z-3.942
g01 x-0.86 f5.
G19 g02 y-1.967 z-3.341 r3.517 f6.5
g17 g00 z1.
M99
n55
s300
g01 z-3.942 f200.
X-0.855 f4.
G19 g03 y1.967 z-3.341 r3.517
g17 g01 z-3.2 f200.
X-0.5 y0.
Z-3.942
g01 x-0.86 f4.
G19 g02 y-1.967 z-3.341 r3.517
g17 g01 z-3.2 f200.
X0.5 y0.
Z-3.942
g01 x0.86 f4.
G19 g03 y1.967 z-3.341 r3.517
g17 g01 z-3.2 f200.
X0.5 y0.
Z-3.942
g01 x0.855 f4.
G19 g02 y-1.967 z-3.341 r3.517
g17 g01 x0.862
g19 g03 y0. Z-3.942 r3.517
g19 g03 y1.967 z-3.341 r3.517
g17 g01 x-0.8 f15.
X-0.862 f5.
G19 g02 y0. Z-3.942 r3.517
g19 g02 y-1.967 z-3.341 r3.517
g17 g01 x0.8 f15.
X0.862 f4.
G19 g03 y0. Z-3.942 r3.517
g19 g03 y1.967 z-3.341 r3.517
g17 g01 x-0.8 f15.
X-0.862 f4.
G19 g02 y0. Z-3.942 r3.517
g19 g02 y-1.967 z-3.341 r3.517
g17 g01 x-0.692 f20.
S3600
g19 g03 y0. Z-3.942 r3.517 f35.
G19 g03 y1.967 z-3.341 r3.517
g17 g01 x-0.519
g19 g02 y0. Z-3.942 r3.517
g19 g02 y-1.967 z-3.341 r3.517
g17 g01 x-0.346
g19 g03 y0. Z-3.942 r3.517
g19 g03 y1.967 z-3.341 r3.517
g17 g01 x-0.173
g19 g02 y0. Z-3.942 r3.517
g19 g02 y-1.967 z-3.341 r3.517
g17 g01 x0.
G19 g03 y0. Z-3.942 r3.517
g19 g03 y1.967 z-3.341 r3.517
g17 g01 x0.173
g19 g02 y0. Z-3.942 r3.517
g19 g02 y-1.967 z-3.341 r3.517
g17 g01 x0.346
g19 g03 y0. Z-3.942 r3.517
g19 g03 y1.967 z-3.341 r3.517
g17 g01 x0.519
g19 g02 y0. Z-3.942 r3.517
g19 g02 y-1.967 z-3.341 r3.517
g17 g01 x0.692
g19 g03 y0. Z-3.942 r3.517
g19 g03 y1.967 z-3.341 r3.517
g17 g01 x0.779
g19 g02 y0. Z-3.942 r3.517
g19 g02 y-1.967 z-3.341 r3.517
g17 g01 x0.606
g19 g03 y0. Z-3.942 r3.517
g19 g03 y1.967 z-3.341 r3.517
g17 g01 x0.433
g19 g02 y0. Z-3.942 r3.517
g19 g02 y-1.967 z-3.341 r3.517
g17 g01 x0.26
g19 g03 y0. Z-3.942 r3.517
g19 g03 y1.967 z-3.341 r3.517
g17 g01 x0.087
g19 g02 y0. Z-3.942 r3.517
g19 g02 y-1.967 z-3.341 r3.517
g17 g01 x-0.087
g19 g03 y0. Z-3.942 r3.517
g19 g03 y1.967 z-3.341 r3.517
g17 g01 x-0.26
g19 g02 y0. Z-3.942 r3.517
g19 g02 y-1.967 z-3.341 r3.517
g17 g01 x-0.433
g19 g03 y0. Z-3.942 r3.517
g19 g03 y1.967 z-3.341 r3.517
g17 g01 x-0.606
g19 g02 y0. Z-3.942 r3.517
g19 g02 y-1.967 z-3.341 r3.517
g17 g01 x-0.779
g19 g03 y0. Z-3.942 r3.517
g19 g03 y1.967 z-3.341 r3.517
g00 g17 z1.
S300
m99
n60
g01 z-3.341 f50.
Y-1.967 f4.
X0.863
g19 g03 y0. Z-3.942 r3.517
g19 g03 y1.967 z-3.341 r3.517
g17 g01 x-0.8 f15.
X-0.863 f4.
G19 g02 y0. Z-3.942 r3.517
g19 g02 y-1.967 z-3.341 r3.517
g17 x-0.86 y-1.9 f15.
G00 z2.
M99
%

i can see the code..... i understand the matrix

 

[TWalker]

Well I think you picked a good forum to go to while you're waiting MrPuff
I love the freedom allowed over there.

Where?

 

[aff-tar]

Great idea! I'm going now to the juicebox direction too.

 

[MrPuff]

It seems a few of you have found me, good to be able to chat with some of you again. I don't think I am allowed to say where I am posting at but I am not too hard to track down.

And thanks Aff-tar, modding is quite fun and hope you make something that gives you a big smile.

 

[MRHTOAD76]

gonna see if i can stalk ya so I can be put on the list

 

[WhatAClumsyGirl]

< it's good to be on the list

 

[jebey29]

< Its better to have one on the way

< it's good to be on the list

 

[clyde2801]

Or to have one....

 

[MastiffMike]

Or to have one....

I EXPECT a thorough review pronto!!!

Or if you prefer, arrange for me to get one NOW!

 

[clyde2801]

I EXPECT a thorough review pronto!!!

Or if you prefer, arrange for me to get one NOW!

http://www.e-cigarette-forum.com/fo...e-reviews/74624-initial-review-mr-puffer.html

Sixteen days before you asked. That quick enough for ya'?

 

[MastiffMike]

http://www.e-cigarette-forum.com/fo...e-reviews/74624-initial-review-mr-puffer.html

Sixteen days before you asked. That quick enough for ya'?

Oh I already saw that review (17 days ago! ) and it's a good one. I thought maybe you had version 2.0?!?!

 

[clyde2801]

Don't think I've really had it long enough for long term review. Having to ship unit back for minor repair now, anyway.

 

[MastiffMike]

Don't think I've really had it long enough for long term review. Having to ship unit back for minor repair now, anyway.

You BROKE it?!?!? Maybe it'd be safer in a Mastiffs hands.....