My juice is amazing

Status
Not open for further replies.

vaporgalinfla

Supplier Associate
ECF Veteran
May 7, 2010
5,918
914
Florida
ok, i don't understand what a buzz is. Is a buzz like an ego tank system? Is it a stand alone vaporizer? I want one now. My ego tank is good and i drip a lot with my ego too but I'm missing some on the flavor it seems :(

There are a few variable voltage mods available. The Buzz and Provari are similar. The major difference between a variable voltage mod and something like an ego is that you can adjust the voltage. All use cartomizers or atomizers (just like an ego). So, on my Buzz or Provari, I can set the voltage anywhere from 3.4 to 5 (maybe higher). Some liquids taste great at 3.6 or 3.7 (like an ego), but others taste better at a higher voltage. For example, I like fruit flavors around 4.0 or 4.1. There's a world of difference vaping certain flavors at different voltages.

I'm honestly not very familiar with an ego tank system. :( Can you use standard atomizers or cartomizers on it? If so, you might want to consider getting some lower resistance cartomizers or atomizers. This will also help to generate more flavor. Have you tried the 306 low resistance atomizers? They'll work on 510 threading.

I hope this helps. :)
 

Sugar_and_Spice

ECF Guru
ECF Veteran
Verified Member
Sep 11, 2010
13,663
35,225
between here and there
There are a few variable voltage mods available. The Buzz and Provari are similar. The major difference between a variable voltage mod and something like an ego is that you can adjust the voltage. All use cartomizers or atomizers (just like an ego). So, on my Buzz or Provari, I can set the voltage anywhere from 3.4 to 5 (maybe higher). Some liquids taste great at 3.6 or 3.7 (like an ego), but others taste better at a higher voltage. For example, I like fruit flavors around 4.0 or 4.1. There's a world of difference vaping certain flavors at different voltages.

I'm honestly not very familiar with an ego tank system. :( Can you use standard atomizers or cartomizers on it? If so, you might want to consider getting some lower resistance cartomizers or atomizers. This will also help to generate more flavor. Have you tried the 306 low resistance atomizers? They'll work on 510 threading.

I hope this helps. :)

Vaporgal,
The ego-t tanks will only work on the ego-t atomizer. You would probably like them. Just pop the (bottom) off and fill by dripping or squirting ejuice into the tank. Easy to fill and only takes a couple of seconds.
:)
sas
 

vaporgalinfla

Supplier Associate
ECF Veteran
May 7, 2010
5,918
914
Florida
Vaporgal,
The ego-t tanks will only work on the ego-t atomizer. You would probably like them. Just pop the (bottom) off and fill by dripping or squirting ejuice into the tank. Easy to fill and only takes a couple of seconds.
:)
sas

So you can use an ego-t tank and an ego-t atomizer on a regular ego? Might have to check this out. Do you know what the resistance is on the atomizer?
 

Sugar_and_Spice

ECF Guru
ECF Veteran
Verified Member
Sep 11, 2010
13,663
35,225
between here and there
So you can use an ego-t tank and an ego-t atomizer on a regular ego? Might have to check this out. Do you know what the resistance is on the atomizer?

Yes. That is what I am using. It will fit on any 510 thread.
I would think that the atty is the same as the reg ones. At least I don't notice any difference.
:)
 
Status
Not open for further replies.

Users who are viewing this thread