Thanks Jerms, I just found a great eBay supplier of Kanthal so will be trying to 30 gauge some time soon. I guess my Kanthal gauge will match my silver's.
A question: I usually just eyeball my 32 gauge coils and they end up pretty much on the spot; 4 times around 2mm wire on my Eternity and 3 times around 2 2mm wicks on my Terminator-C. How many more wraps would I do to make the equivalent with 30 gauge? I don't use any mods with built in ohm-readers and don't really trust my multimeter for coils (time to get alligator clips).
What mods do you use? My 5/4 wraps of 30 on 3mm silica is pretty low at 1.1. I think other's get more around 1.5 with 5/4 wraps, so I can't account why mines lower. I'm going to try doubling my wick to see if I can get it above 1.2 ohm to work on my VAMO. I don't want to do any more wraps, because with the thicker wire it can be less reactive with heat up time unless raising the watts a lot too. Either way, you may want less ohms anyways since you'll need more watts to provide the same temp as the 32 gauge.
Sent from my LGL55C using Tapatalk 2