Need serious help. I'm at a loss.

[bd18802]

Ok so I have a Kbox and subtank and the subtank will not fire. It will work for my Atlantis and lemo though. I put my suptank on a different device and it worked fine. I tore the subtank apart and tightened any loose connections it had and cleaned them. The resistance in the coil was .9 so it was higher than the minimum resistance for the kbox and I have tried my friends subtank and mini on the kbox and they will not fire either. Is there something I am missing? Please help

 

[Daffie]

Be sure to tighten your coil off the mod, the base has a floating pin. Had the same problem once.

 

[bd18802]

I had tried that but it still will not fire. For some reason the only think it will not fire is any kind of subtank. I've tried 3 different ones and I have had the same result with each

 

[Robert Cromwell]

Perhaps the Kbox will not fire at that resistance coil on certain watts settings? Tried other watts settings?

 

[Ablonz]

Try putting the beauty ring on first. If that helps, it would be due to the floating pin.

 

[EBates]

The Kbox does not list a floating 510 pin. For that reason I'd suspect that the 510 pin is too low. Try raising it very slightly.

 

[Ablonz]

I was talking about the floating pin on the subtank.

 

[EBates]

I was talking about the floating pin on the subtank.

And I was talking to the 510 pin on the Kbox. Since other tanks didn't work either the Kbox appears to be the common denominator.