Nemesis or nemmy users gather around!!

[asvaldr]

The kayfun 3.1 makes it even longer!

At least it is a rock solid reliable setup, just not compact.

Why not using nano kit?

Thats the Anima dripper by atmomixani. It comes with a 510 and a hybrid thread so it screws direct into the mini nemesis. The hybrid/510 is integrated into the atty which is ingenious IMo. No need for adapters an youd never know it was there if i didnt tell ya.

But ya the anima is one of my fave drippers. Innvative design for dual coils on such a narrow rda. Amazing flavor too. I dont think theres a clone yet im not totally sure. I completely took it apart for cleaning and counted 13 pieces not including orings and screws. So ya pretty complex design so maybe china just said screw it lol.

So it's a 19mm atty right? Never seen one before

 

[sando7]

i use the Nano kit w/mine and i like it......the compact mode looks dayum good but the battery life is horrible that's why i stay in 18650 mode......

now my Stainless Mini Nemi in 14650 mode with a DID is very nice to take out w/me in the car and i always carry 2 batts, usually get a good 2 hrs of heavy use off each batt.......sure wish i could find a 14/16mm Copper Topper it would give me a great excuse to buy the Mini Copper Nemi also....man my mind is in the Nemi Gutter........also gonna pick up a regular Copper Nemi sooner or later to complete the 22mm set

this Anima dripper, seems to be very interesting to me, i'm gonna check it out!

 

[asvaldr]

i use the Nano kit w/mine and i like it......the compact mode looks dayum good but the battery life is horrible that's why i stay in 18650 mode......

now my Stainless Mini Nemi in 14650 mode with a DID is very nice to take out w/me in the car and i always carry 2 batts, usually get a good 2 hrs of heavy use off each batt.......sure wish i could find a 14/16mm Copper Topper it would give me a great excuse to buy the Mini Copper Nemi also....man my mind is in the Nemi Gutter........also gonna pick up a regular Copper Nemi sooner or later to complete the 22mm set

this Anima dripper, seems to be very interesting to me, i'm gonna check it out!

Been interested in the nemmy but always wondering about 14650 battery life, how's the battery performing?

 

[sando7]

Been interested in the nemmy but always wondering about 14650 battery life, how's the battery performing?

using E-Fest 14650's in my Mini Nemi, there brand new only had them about 2 weeks or so (rotating 4 batts), been working & holding a charge just fine; haven't really looked for any better/diff brands yet but i know AW don't have-um and that's a bummer.....but yea overall i'm satisfied with them so far.

 

[asvaldr]

using E-Fest 14650's, there brand new only had them about 2 weeks or so, been working & holding a charge just fine; haven't really looked for any better/diff brands yet but i know AW don't have-um and that's a bummer.....but yea overall i'm satisfied with them so far.

What is the build on your atty? I always build at .8 ohm how long do you think the battery will last?

 

[sando7]

What is the build on your atty? I always build at .8 ohm how long do you think the battery will last?

1.1 on the DID and 1.2 on my Novice Cln RDA, which both fit and looks perfect on the Mini....also use the Mini KF @ 1.4 in short mode

like i said about 2 good hrs

i've got a couple of pic's but the Atty's are on the Novice, if ya wanna see look in my albs, don't want to post the Novice in the Nemi Thread.

 

[asvaldr]

1.1 on the DID and 1.2 on my Novice Cln RDA, which both fit and looks perfect on the Mini....also use the Mini KF @ 1.4 in short mode

like i said about 2 good hrs

Hmm interesting, i have a good deal from a local b&m here 80$ for nemmy and mini kayfun been wondering should i buy it or not. Btw the price of vape gear here in Indonesia is ridiculously high for example it's 40 to 50 bucks for clone kayfun lol so it's a pretty good deal considering i have only seen 2 seller that sells nemmy, and i know most seller here in this country i think.

 

[sando7]

Hmm interesting, i have a good deal from a local b&m here 80$ for nemmy and mini kayfun been wondering should i buy it or not. Btw the price of vape gear here in Indonesia is ridiculously high for example it's 40 to 50 bucks for clone kayfun lol so it's a pretty good deal considering i have only seen 2 seller that sells nemmy, and i know most seller here in this country i think.

is that 80 bucks for both or each one separate....it's a shame your prices are higher there.....your not that far from Fast-Tek just order from them if there is no hassle for ya

 

[Vaponators]

I have heard great reviews about the Nemesis and the clones for ages. I thought I would try out a clone from FT. Received it a few weeks ago. Looks good in 18350 mode with a Brass Monkey. Other than that.......

1. INCREDIBLY CRAPPY FIRE SWITCH!!
2. Very rough throw. Action is not smooth at all.
3. Stands leaning to one side rather than straight up.
4. Adjustable post on fire switch is too short.
5. Spring is too weak to leave mod standing without firing if you don't lock the locking ring.
6. Locking ring jams quite often and is either too loose or too tight.
7. Ordered magnets from FT to try and alleviate the problem. 6 out of 10 were broken on arrival. It takes three magnets PLUS the spring to keep this baby from firing in 18650 mode. But that makes for a VERY tight fit and short throw!

Overall, a frustrating experience which is only exacerbated further by FT customer support. They are supposed to send me a replacement switch but dealing with their returns department has been horrible. Bad communication.

Don't know who made this particular clone but I don't think it measures up to some other Nemesis clones that are of much better quality. Has anyone received a good one from FT?

 

[asvaldr]

is that 80 bucks for both or each one separate....it's a shame your prices are higher there.....your not that far from Fast-Tek just order from them if there is no hassle for ya

It's for both, I'm not too sure about shipping from abroad cause my custom is kinda sucks. Don't want to be bothered by them for a small purchase.

 

[anumber1]

No nano kit because I want the juice capacity. Large in size is ok . I made a PVC stand for it so my mod can sit upright on the control desk happily.

 

[sando7]

I have heard great reviews about the Nemesis and the clones for ages. I thought I would try out a clone from FT. Received it a few weeks ago. Looks good in 18350 mode with a Brass Monkey. Other than that.......

1. INCREDIBLY CRAPPY FIRE SWITCH!!
2. Very rough throw. Action is not smooth at all.
3. Stands leaning to one side rather than straight up.
4. Adjustable post on fire switch is too short.
5. Spring is too weak to leave mod standing without firing if you don't lock the locking ring.
6. Locking ring jams quite often and is either too loose or too tight.
7. Ordered magnets from FT to try and alleviate the problem. 6 out of 10 were broken on arrival. It takes three magnets PLUS the spring to keep this baby from firing in 18650 mode. But that makes for a VERY tight fit and short throw!

Overall, a frustrating experience which is only exacerbated further by FT customer support. They are supposed to send me a replacement switch but dealing with their returns department has been horrible. Bad communication.

Don't know who made this particular clone but I don't think it measures up to some other Nemesis clones that are of much better quality. Has anyone received a good one from FT?

View attachment 359236 View attachment 359237

that's a shame i feel for ya all my 22mm Nemi's are H-Cigar...or at least that what the box's say, them switches need to be cleaned and pampered on a reg basis on all of-um imo....get your magnets from FatDaddy or SuperMagnetMan.....fat daddy also has some other goodies for the Nemi


edit: i'll get a couple of new pic's up soon with the Mini

 

[sando7]

here are some Mini Nemi shots, 14650 Mode

Mini & VA10 19mm RDA

Mini & Mini Tower 14mm

Mini & The DID
Brass Nemi/Brass Tobh

Mini & Mini KF/short mode
Stainless Nemi/Magma

Mini & the Novice Cln RDA
Mixed Nemi/Brass Zenith

 

[ForeverDiving]

Everyone knows that fasttech sells a hybrid adapter for like $2 bucks right, I love it, works great!

Anyone have any spare magnets I could buy? They also have them @fasttech but if I could buy some stateside I'd love too.
Good thread, I'll post some pics later

::

Fat Daddy Vapes has them, albeit expensive. He says they're much better than the FT ones tho.

 

[ForeverDiving]

Yep. Got 6 of 'em to play around with. Although modified the nylon peice to act as a insulator for the battery and just used the adjustable pin on the Russian. Works good.
View attachment 358839 View attachment 358840

Great rig... I like it! Is that the finned cap from FT?

 

[ForeverDiving]

I got these two beater clones, both brass, I hate brass so I started playing around with patinas. . . I also wrapped the tubes in high-end car wrap vinyl, not only does it keep the patina off of a fully polished brand new condition tube, it keeps dings and scratches off too.

Both are brass, I really like how the copper look turned out on the first brass patina job I tried.

You can really see the seam BC I took the picture b4 I cleaned the threads.
I'm gonna turn this one deep blue

How are you doing that spotted patina? Please share!

 

[ForeverDiving]

Hmm interesting, i have a good deal from a local b&m here 80$ for nemmy and mini kayfun been wondering should i buy it or not. Btw the price of vape gear here in Indonesia is ridiculously high for example it's 40 to 50 bucks for clone kayfun lol so it's a pretty good deal considering i have only seen 2 seller that sells nemmy, and i know most seller here in this country i think.

Pretty much what they ask in Mexico for a nemmy Hcigar clone... :/

 

[ForeverDiving]

It's for both, I'm not too sure about shipping from abroad cause my custom is kinda sucks. Don't want to be bothered by them for a small purchase.

In Mexico all ecig parcels are being denied import into the country since about six weeks ago. I've already had to send back two of them to a friend in the US who fortunately just came into town with them. I shall be getting them tonight. I wonder what the B&M and online sellers are doing, probably bribing customs or just smuggling. In any case, they're tripling or quadrupling the prices they surely get from AliBaba (and the 40 thieves?). :C

 

[bsoplinger]

I have heard great reviews about the Nemesis and the clones for ages. I thought I would try out a clone from FT. Received it a few weeks ago. Looks good in 18350 mode with a Brass Monkey. Other than that.......

I received a Stingray from FastTech that I'd guess was made by the same company. Painted black stainless steel. Awful, horrible switch also. But it was fixable into a decent switch. I'm sure that the switch you received could be fixed also. If the tons of threads here aren't enough info I'd be glad to fix it for you.

I've gotten a number of Nemeses from FastTech, all work well. Brass, stainless steel, copper and gunmetal chrome plated. Along with the anodized aluminum tubes. And semi-hybrid adapters and their magnets.

So the offerings from FastTech can be very nice, you just have to be careful with which model you select.

Re: The Nemi or mini Nemesis. Quite a few places such as FastTech and focalecig just recently started selling a clone. Hopefully that means atomizers to follow, assuming sales are decent. In fact, currently focalecig has a Nemi as their group buy, $16 which is quite a deal.

Sent from my Nexus 7 using Xparent Purple Tapatalk 2

 

[ForeverDiving]

I have a black on copper Sting from Hcigar but the switch is butter smooth. It even fits my Nemos.

Tapatalk Pro / Samsung Galaxy 4