New Aspire Nautilus 2 tank just released!

Status
Not open for further replies.

NotSoMini

Resting In Peace
ECF Veteran
Jul 13, 2014
3,367
13,654

NotSoMini

Resting In Peace
ECF Veteran
Jul 13, 2014
3,367
13,654
i use the 0.7s with my Kabuki P3. For the Kabuki 510 for whatever reason I have one that they fit. With the other Kabuki 510 I have to to swap out the pin on the 0.7s with one from the Nautilus 1.8. Doing this the air flow will be less than on the Kabuki P3 because the hole on the bottom of the pin on the 0.7 is a little larger than the 1.8 ohm coils. If you are using them on the P3 then you will get more air flow. The 0.7 ohms coils with my Kabuki P3/510 is my favorite set up.
 

Liskrig

Super Member
ECF Veteran
Apr 2, 2015
640
948
MA, USA
Finally got here! Still breaking in the 0.7 ohm coil with some new liquid from Quit That Grit. Root beer! So far I'm liking the tank, it has a nice look, and the flared drip tip is really comfortable. The airflow is a bit airy for me personally for my style of MTL, I'm using it with 3 visible holes and getting used to it. I'll post back here once I have a better feel for it :)

Open to any questions about the tank, and I'm willing to take any detailed photos of the tank/mechanics if requested.
ae6b7245181d8a596bc539356c97f9a3.jpg


Sent from my Super Secret Spy Phone
 

BreSha6869

Vaping Master
ECF Veteran
Verified Member
Nov 21, 2015
4,876
18,564
56
Toronto, Canada
I picked up two of these locally for my wife (red and black). I cancelled my Fasttech order as the lead time kept getting pushed out and locally they were only a couple of bucks more.

I'll post after we spend Some time with these...

They look cool in any case....
 

sofarsogood

Vaping Master
ECF Veteran
Oct 12, 2014
5,553
14,168
I believe the N mini is 2 ml capacity. I haven't found that to be a problem. Since I diy pouring out an ml of liquid doesn't sound too horrifying. What I like is it's a lot shorter than the N mini. If it vapes the same as the N mini it should be a winner. Do you know of a reviewer who has made a direct comparison. That's what I'm waithing for.
 

Liskrig

Super Member
ECF Veteran
Apr 2, 2015
640
948
MA, USA
I believe the N mini is 2 ml capacity. I haven't found that to be a problem. Since I diy pouring out an ml of liquid doesn't sound too horrifying. What I like is it's a lot shorter than the N mini. If it vapes the same as the N mini it should be a winner. Do you know of a reviewer who has made a direct comparison. That's what I'm waithing for.
I'm not a professional reviewer by any means. I use both the original Nautilus, and the Nautilus Mini, I personally prefer the flavor of the Mini compared to the two (Original vs Mini) but from my experiences so far, I feel the Nautilus 2 vapes better than the mini! The flavor is great, vapor production is better, and I personally love the look of it.

Sent from my Super Secret Spy Phone
 

David Wolf

Moved On
ECF Veteran
Dec 11, 2014
2,847
6,780
Charlotte, NC
I'm not a professional reviewer by any means. I use both the original Nautilus, and the Nautilus Mini, I personally prefer the flavor of the Mini compared to the two (Original vs Mini) but from my experiences so far, I feel the Nautilus 2 vapes better than the mini! The flavor is great, vapor production is better, and I personally love the look of it.

Sent from my Super Secret Spy Phone
Is that flavor review with the 0.7ohm coil? I did a blind taste test of a kabuki clone, Triton mini, and nautilus mini all with the same style acrylic drip tip, 1.8 ohm coils, and juice for fairness and it was a dead heat for flavor haha. Though I did think that the kabuki had a smoother vape.
 

Liskrig

Super Member
ECF Veteran
Apr 2, 2015
640
948
MA, USA
Is that flavor review with the 0.7ohm coil? I did a blind taste test of a kabuki clone, Triton mini, and nautilus mini all with the same style acrylic drip tip, 1.8 ohm coils, and juice for fairness and it was a dead heat for flavor haha. Though I did think that the kabuki had a smoother vape.
Yes it is. The 0.7 ohm coil comes pre-installed and I figured... Why not? But as a disclaimer, I've never has the liquid I'm using before. but I may throw the 1.8 Ohm coil in my Nautilus Mini and try the same juice. If memory serves me right, the flavor is slightly more pronounced with v.2. I personally feel it is more intense, but I also like a very dense, warm vape and the mini only gave me that at a wattage not recommended for the coils. I'm using the 0.7 ohm coil as a MTL coil and its keeping up very well.

Sent from my Super Secret Spy Phone
 

David Wolf

Moved On
ECF Veteran
Dec 11, 2014
2,847
6,780
Charlotte, NC
Yes it is. The 0.7 ohm coil comes pre-installed and I figured... Why not? But as a disclaimer, I've never has the liquid I'm using before. but I may throw the 1.8 Ohm coil in my Nautilus Mini and try the same juice. If memory serves me right, the flavor is slightly more pronounced with v.2. I personally feel it is more intense, but I also like a very dense, warm vape and the mini only gave me that at a wattage not recommended for the coils. I'm using the 0.7 ohm coil as a MTL coil and its keeping up very well.

Sent from my Super Secret Spy Phone
Good to hear it works well MTL with the 0.7 coil. I really like the looks of the new Naughty 2 :)
 

ToolmanTexas

Ultra Member
ECF Veteran
Verified Member
May 14, 2014
2,747
14,648
T for Texas!
Finally got here! Still breaking in the 0.7 ohm coil with some new liquid from Quit That Grit. Root beer! So far I'm liking the tank, it has a nice look, and the flared drip tip is really comfortable. The airflow is a bit airy for me personally for my style of MTL, I'm using it with 3 visible holes and getting used to it. I'll post back here once I have a better feel for it :)

Sent from my Super Secret Spy Phone

Mine should be here tomorrow. I'm hopeful that I can get a very tight draw by closing off the AFC to almost nill. Planning on using the 1.8 as I don't care for sub-ohm vaping.
 
  • Like
Reactions: David Wolf

Liskrig

Super Member
ECF Veteran
Apr 2, 2015
640
948
MA, USA
Mine should be here tomorrow. I'm hopeful that I can get a very tight draw by closing off the AFC to almost nill. Planning on using the 1.8 as I don't care for sub-ohm vaping.
I hope you enjoy it! I can tell you from playing with it and finding my own draw, the controller can give you a VERY tight draw. I smoked pipes in the past, but also smoked those little clove "cigars" and you can get a tighter draw on this tank than I've ever had on those filtered cigars. I think you'll be satisfied with it!

Sent from my Super Secret Spy Phone
 

ToolmanTexas

Ultra Member
ECF Veteran
Verified Member
May 14, 2014
2,747
14,648
T for Texas!
I hope you enjoy it! I can tell you from playing with it and finding my own draw, the controller can give you a VERY tight draw. I smoked pipes in the past, but also smoked those little clove "cigars" and you can get a tighter draw on this tank than I've ever had on those filtered cigars. I think you'll be satisfied with it!

Sent from my Super Secret Spy Phone
That is great to know!
 
  • Like
Reactions: Liskrig

Liskrig

Super Member
ECF Veteran
Apr 2, 2015
640
948
MA, USA
Mine came today! I gave it a bath and it is currently air drying. I like a looser draw, so will try the 0.7 ohm coil first.
Nice! What color did you go with? The 0.7 ohm coil works nicely for a restricted lung-hit (had to try it for anyone who had questions) and handles very well for MTL.
 
  • Like
Reactions: NotSoMini

Jingles

Ultra Member
ECF Veteran
Verified Member
Jul 18, 2011
2,503
9,908
Ohio
Nice! What color did you go with? The 0.7 ohm coil works nicely for a restricted lung-hit (had to try it for anyone who had questions) and handles very well for MTL.
I was boring and went with the stainless steel one. Thinking of using it on my purple CoolFire Ace and the stainless steel seemed like the best color choice, although grey probably would of worked also.
 

David Wolf

Moved On
ECF Veteran
Dec 11, 2014
2,847
6,780
Charlotte, NC
Finally got here! Still breaking in the 0.7 ohm coil with some new liquid from Quit That Grit. Root beer! So far I'm liking the tank, it has a nice look, and the flared drip tip is really comfortable. The airflow is a bit airy for me personally for my style of MTL, I'm using it with 3 visible holes and getting used to it. I'll post back here once I have a better feel for it :)

Open to any questions about the tank, and I'm willing to take any detailed photos of the tank/mechanics if requested.
ae6b7245181d8a596bc539356c97f9a3.jpg


Sent from my Super Secret Spy Phone
That's a nice looking combo there!
 
  • Like
Reactions: NotSoMini

NotSoMini

Resting In Peace
ECF Veteran
Jul 13, 2014
3,367
13,654
I was boring and went with the stainless steel one. Thinking of using it on my purple CoolFire Ace and the stainless steel seemed like the best color choice, although grey probably would of worked also.

I have not ordered one yet however will more than likely go with stainless steel as well so will be boring with you. Let us know how you like the 0.7 ohm coil once you have tried it.
 
  • Like
Reactions: Jingles
Status
Not open for further replies.

Users who are viewing this thread