- Status
That's about as high as those YL-103A chargers will go. 4.17V is ideal. 4.2V is actually too high.
Press the power button and release. If the button stays lit without flashing for several seconds after release, that is the low power indicator. Soon after seeing this indicator the E-Power will stop working due to low power. It is normal for this button to stay lit for a second or two after release.
Last edited:
Another signal you can get with the E-Power switch light is several seconds of fast flashes after releasing the power button. This indicates some sort of malfunction.
I've also seen another signal for low battery power on E-Power 14650. This is several seconds of slow flashes after the button is released. I've seen both low power indicators on my E-Power 14650s.
man i just tried to order some cartos from crystalclearvaping that madjack suggested an got a store closed message
i noted they said not for use above 3.7 volt will those be o.k. for my e-power?
I don't want to tell you the wrong thing. I don't know much about the whole white/blue switch issue. You could email him and ask him before you order.
Why is CCV closed?
Why is CCV closed?
I didn't follow it closely because I don't own one, but there were several posts regarding the switch on the epower and not being able to use certain cartomizers. I'm sure one of the people that have and recommend the epower can help you with that.
Boge 2.0 cartomizers are very good. They're smaller than the 1.7 cartos but you get a good vape with them. Joogler has them and you get a free bottle of juice with your order. Use the code ECF5OFF for $5.00 off your first order.
Boge 2.0 cartomizers are very good. They're smaller than the 1.7 cartos but you get a good vape with them. Joogler has them and you get a free bottle of juice with your order. Use the code ECF5OFF for $5.00 off your first order.
CCV is closed until the 15 because of legal issues dealing with them giving out syringes without a prescription.(or some such nonsense)
The smoktech 1.7 ohm resistors work great on the E-Power if you have the older blue switch. The white switch seems to not work well with that low a carto but does work with the Boge 2.0 ohm ones. Hopefully they'll have newer switches in this month that fixes that problem.
The smoktech 1.7 ohm resistors work great on the E-Power if you have the older blue switch. The white switch seems to not work well with that low a carto but does work with the Boge 2.0 ohm ones. Hopefully they'll have newer switches in this month that fixes that problem.
Last edited:
With the blue switch you can use the smoke tech 1.7 ohm single coils(ressurector) just fine. I run one in a 5ml tank on an E-power and It works great!!
Yes, with the blue switch you can use Smoktech single coil 1.7 ohm LR XL or Smoktech single coil 2.0 ohm LR XL. LR means low resistance. XL is the carto size: how much liquid it will hold. The 1.7 will be warmer and produce a little more vapor than the 2.0. I use both on the E-Power 14650.
Hoosier has the cartomizers listed above. The "Resurrector" is the Smoktech single coil 1.7 ohm LR XL with a snappy nickname provided by CCV. Otherwise, they are the same exact thing.
Hoosier has the cartomizers listed above. The "Resurrector" is the Smoktech single coil 1.7 ohm LR XL with a snappy nickname provided by CCV. Otherwise, they are the same exact thing.
well i started filling and using the small blu cigs type cartos and working good the cartos that came with my e-power still don't seem to work right i get good vapor and hit with the small cartos
- Status
Similar threads
- Locked
