New Genesis type atomizer by DID!

[Galaxy3]

Yes.
I've recently stumbled onto this method, and have a lot to learn about it. (sizes of wire, types of wire, how many wraps around the wick, etc).
But here's a tip or two to get started:
1. put the two ends of wire in a vice grip,
2. put the other two ends on a wire coat hanger
3. twist the coat hanger until desired wrap (tension) is reached.
4. this provides uniform twist of the two wires
5 wrap around your wick normally.

(tips from Grizewald... who also discovered the blue flame and the usb zoom from amazon for taking closeup pics and for wrapping your coils)

ATTENTION JIM: Amazon.com: Veho VMS-001 x20-x200 Magnification Discovery Digital USB Microscope with Alloy Stand: Camera & Photo

I am definitely going to try that!! (even though my repeatability rate on my single wire sucks)

I think i am OCD...keep wrapping coil after coil chasing after good vapor.

Sometimes i get it, sometimes i dont.

Oh well, just got to keep at it.

 

[Mr.Mann]

Hey guys, I am, of course eyeballing the mini DID, thinking this might be a real pocket friendly device, what bat would pair, do ya think, for quick grab and run use. Better go order.

Sent from my cm_tenderloin using Tapatalk 2

Maybe an ego twist?

 

[ricklynchcore]

Maybe an ego twist?

Never used one, but will look into this, thanks for tip.

Sent from my cm_tenderloin using Tapatalk 2

 

[hdzrtvap]

Hey guys, I am, of course eyeballing the mini DID, thinking this might be a real pocket friendly device, what bat would pair, do ya think, for quick grab and run use. Better go order.

Sent from my cm_tenderloin using Tapatalk 2

the DID works real well on a Twist and using a twist you still get the benefit of VV

 

[Jason-Tank]

Any Canadian DID owners wanna sell me some clear tanks? Pretty pleaase? =D

 

[hdzrtvap]

the DID works real well on a Twist and using a twist you still get the benefit of VV

Here is a picture of it on a 1000mah Twist.

 

[ChuckBell]

Never used one, but will look into this, thanks for tip.

Sent from my cm_tenderloin using Tapatalk 2

Get a Smoktech VV Gripper, it takes a 18650 and it fits in the palm of your hand.
Variable Volt Gripper

 

[ChuckBell]

Yes.
I've recently stumbled onto this method, and have a lot to learn about it. (sizes of wire, types of wire, how many wraps around the wick, etc).
But here's a tip or two to get started:
1. put the two ends of wire in a vice grip,
2. put the other two ends on a wire coat hanger
3. twist the coat hanger until desired wrap (tension) is reached.
4. this provides uniform twist of the two wires
5 wrap around your wick normally.

(tips from Grizewald... who also discovered the blue flame and the usb zoom from amazon for taking closeup pics and for wrapping your coils)

ATTENTION JIM: Amazon.com: Veho VMS-001 x20-x200 Magnification Discovery Digital USB Microscope with Alloy Stand: Camera & Photo

Thanks! it's something I'll try one day

 

[Cyrus Vap]

Did you try this setup on your max....is the max too much for such a small coil?

The max doesn't seem to want to play nice under 1.5, I think that leads to an F1 or some other silly flashing

I also don't trust the max when setting up a genesis, maybe I'm crazy but it seems to CREATE shorts sometimes. Once things are nice and broken in its fine though.

 

[mwa102464]

Just wrap your wire around a simple drill bit, or anything round the size you want it for a perfectly uniform coil.

What is the zoom needed for ? people cant see there wrap ? dont get it ?

 

[mwa102464]

Maybe its me, but my sweet spot is still 3 wrap, kanthal 32, 3.2 ohms, vv set at 4.4, 50/50 on pg/vg, 8 mg nic, and I get all the vape and TH I can handle. Recently dropped my nic from 16-18 to 8, all thanks to my DID producing incredible vape and TH. I NEVER got close to this satisfaction on cartos or tanks!

Sent from my cm_tenderloin using Tapatalk 2

ricklynchcore have you tried the 2 wrap ? its pretty darn good

 

[mwa102464]

For MWA............

Thanks aziffel

 

[Uma]

Never used one, but will look into this, thanks for tip.

Sent from my cm_tenderloin using Tapatalk 2

The eGo Twists are nice!! I love mine and can't wait to get the Mini DID for them (elegant, vV, pocket friendly with the 5 click shut off/on, affordable, fast charging with the fast charging and did I mention affordable?

and yes, the regular DID even works on them too, for those times your Mini DID is undergoing baths or rewiring...

 

[Mr.Mann]

Never used one, but will look into this, thanks for tip.

Sent from my cm_tenderloin using Tapatalk 2

Have you ever seen the Hammer of Thor? I am thinking the Mini would be cool on this.

 

[Uma]

I am definitely going to try that!! (even though my repeatability rate on my single wire sucks)

I think i am OCD...keep wrapping coil after coil chasing after good vapor.

Sometimes i get it, sometimes i dont.

Oh well, just got to keep at it.

You'll have the rba mastered before you know it! It's all in the tension and oxidizing.
Don't forget, it takes a little while for everything to kick in good... like a new car, ya gotta keep er under the speed limit the first 500 miles and then she roars.

 

[Uma]

Just wrap your wire around a simple drill bit, or anything round the size you want it for a perfectly uniform coil.

What is the zoom needed for ? people cant see there wrap ? dont get it ?

Jim said that once he gets a good zoom zoom, he'll make another tutorial, complete with all the info.
Also, folks like me, have a hard time seeing the wire... it's as thin as a hair for heaven's sakes!
Also, the zoom on this usb gadget takes incredible photos! (for wrapped coils, etc.. ).
It pays for itself in no time.

 

[Uma]

Have you ever seen the Hammer of Thor? I am thinking the Mini would be cool on this.

Oh I'd love to see the DID on that one! That's the coolest little mod ever.

 

[braveheart]

ricklynchcore have you tried the 2 wrap ? its pretty darn good

to me with 2 wraps I get the best vapor production, I mean cloud of vapor. also as Uma said "it takes a little while for everything to kick in good", you have to vape couple of hours to see the result

 

[Pampavich]

The eGo Twists are nice!! I love mine and can't wait to get the Mini DID for them (elegant, vV, pocket friendly with the 5 click shut off/on, affordable, fast charging with the fast charging and did I mention affordable?

and yes, the regular DID even works on them too, for those times your Mini DID is undergoing baths or rewiring...

I agree! To match a ss ego twist should it be the polished or satin mini DID? Just to be sure..

 

[Uma]

I agree! To match a ss ego twist should it be the polished or satin mini DID? Just to be sure..

Good question! I assumed the shiney, but I am only guessing. I have a black one and a purple one, don't yet have a shiney one.
Oh man, can you imagine the Mini Did on the eGo DRAGON too???