New Genesis type atomizer by DID!

[David Pavid]

Hi
I am ready to take orders again!
I must say that I made a good deal so this goes to you all
With all new orders for an atomizer you will have wire for a year maybe. lol
20 meters of 0.2mm wire!
The new people need this!

Hey Jim, sounds great
Any idea when the driptips will be available?

 

[Jimi D.]

Just got my Caravela yesterday and here are some pics of Mini and Standard DID's on the tubes. We took 81 pics to get these and two other pics not shown here. Diff. light and diff. times of the day.

The Mini is going to sit permanently on this one

Oh my stars! Those pics are fabulous!

 

[fuzzione]

Indeed dspin, great job on the pics. Lighting and backgrounds are top notch. Bet you wear sunglasses most of the time

 

[Atlantisboy]

Hi Jim when will you have the clear windows for the short did available?Thank you.

 

[cindiccwriter]

Just walked in the door and guess what was on the counter? Thaaat's Right! (to quote one of my favorite films-the Jerk) The Mini DID is Here! The Mini DID is Here !! !! It is BEAUTIFULL. Thanks Jim! Now just waitin for the GGTS to get here and have the perfect setup. Now off to create the wick. hee hee..

 

[Atlantisboy]

How long do you guys find it takes a brand new wick and coil to break in before you start getting good flavor? Thanks.

 

[Jimi D.]

How long do you guys find it takes a brand new wick and coil to break in before you start getting good flavor? Thanks.

10 minutes for me.

 

[Atlantisboy]

Wow , I must be doing something wrong then! Thanks

 

[Bludrgn]

Quick DID question. What sort of resistance drop should I expect to see over the break in period. I am using a 4/3 wrap of .20 kanthal. I have already seen a .4 ohm drop over the first day and a half. Should I expect it to drop any more?
Sent from my HD7 using Board Express

 

[dspin]

There ya go! I am waiting on a GGTS and STILL feel like I'm in the lot of Sandford & Sons. Looks Great!

Hey Yankee, no need for that - pm coming to you now with link. I think you will like it.

 

[Cloud Wizard]

How long do you guys find it takes a brand new wick and coil to break in before you start getting good flavor? Thanks.

I've seen people say up to a tank full, but for me usually 1/4 to 1/2 tank and full flavor comes through.

 

[Cloud Wizard]

Quick DID question. What sort of resistance drop should I expect to see over the break in period. I am using a 4/3 wrap of .20 kanthal. I have already seen a .4 ohm drop over the first day and a half. Should I expect it to drop any more?
Sent from my HD7 using Board Express

Hmm, when resistance drops I usually think short. I typically start a few points below baseline (I always check resistance on a bare new coil to see where it is supposed to be) with a new coil and then slowly come up as the wick seasons. Is the flavor and vapor ok? If so, I'd "just vape it". If not, I'd give the wick a quarter turn to see if it moves the coil onto wick space thats better oxidized (and brings the resistance back up to starting point). Also, make sure your wick isn't touching the bottom of the tank and is trimmed to the top or just below the center post height (little SS hairs can make shorts to the tank bottom or top cap).

 

[fuzzione]

Hmm, when resistance drops I usually think short. I typically start a few points below baseline (I always check resistance on a bare new coil to see where it is supposed to be) with a new coil and then slowly come up as the wick seasons. Is the flavor and vapor ok? If so, I'd "just vape it". If not, I'd give the wick a quarter turn to see if it moves the coil onto wick space thats better oxidized (and brings the resistance back up to starting point). Also, make sure your wick isn't touching the bottom of the tank and is trimmed to the top or just below the center post height (little SS hairs can make shorts to the tank bottom or top cap).

I think Wiz's recommendation above should be regarded as a must for those new to RBA's. Knowing where the ohm's should be in a perfect, short-free setup provides an excellent reference point if something seems off.

 

[WNCmotard]

I just placed my first DID order, the flood gates are open folks, get 'em while they last. I'm super excited!!

 

[rolbyroland]

(little SS hairs can make shorts to the tank bottom or top cap).

We should see E1 on Provari?

 

[Waho]

I just placed my first DID order, the flood gates are open folks, get 'em while they last. I'm super excited!!

Same here! My first "premium" Genesis.

Big shout out to yankeebobo whom accidentally became an excellent mentor =D

 

[Cloud Wizard]

We should see E1 on Provari?

You certainly hope NOT to. E1/E2 mean either your coil is too low resistance (not enough wraps) or you have a short (look for hot spots. Make sure your Provari is turned down to 3.0v to get started. Some things to try:

1. Make sure the wick isn't touching bottom of tank, top cap or center post
2. Nudge the coil above below a hotspot (current comes in from the poles so the short is towards the center of wick from where it glows red)
3. Twist the wick a quarter turn to try and find better oxidized wick
4. Pull the wick out (twist while pulling up) and torch again to add oxidation

 

[Tonytiger1]

I just ordered my replacement center pin kit. God speed Jim!


Tony

 

[Mr.Mann]

== Make sure your Provari is turned down to 3.0v t
[/LIST]

Great tip. It's amazing how so many things can still be suggested that may seem simple but can make such a huge difference.

 

[outadadark]

Just received the new Roller battery mod, telescopic stainless steel, all battery sizes!!!

Looks great with the DID atop, a precision engineered MOD to accompany a precision engineered atomiser.