NEW MODS!! The PrecisePlus 18500 & 18350.

[snork]

I can't wait either, it should be here tomorrow. Now, do I need a P10, hmmmm!

Well, I received my P10 yesterday, and I'd have to say yes. But I'll have to wait until the icr 10440s and HH.357 I've ordered for it to come in until I can say YES yes.
The little unit I bought from nash77 is great but needs a little Super-T care. I wonder if I should ask if it could be refinished P+ style? I guess I just did. Or would it be more appropriate to leave it shiny original?

 

[vapn]

I would send that bad boy in to David and have the new finish and contact points added to the top cap. That should really liven it up quite a bit.

 

[mwa102464]

How are adjustments made....... with the little off-center philips screw, or what?

Yes !...................

 

[artyoh]

Yes !...................

Thanks. I'd been thinking it would make providing for adjustments from outside a tube-mod easier if it worked coaxially.....guess I was just wrong.

 

[Firefly13]

When are the +'s gonna be back in stock ? I think i've finally decided i 'need' one, not just 'want' one anymore : D

 

[mwa102464]

Thanks. I'd been thinking it would make providing for adjustments from outside a tube-mod easier if it worked coaxially.....guess I was just wrong.View attachment 61249

For right this second ya, but in time who knows what a good machinist can do with this, there could be a way in the future to make an adjustment from the outside, but really it isnt so needed in my opinion, once you know your sweet spot your pretty much going to set it and forget it, plus how this works it monitors the resistance of the Atty/Carto and this is one of the coolest things about this thing in my opinion. The idea of having a total regulated vape the entire charge cycle of the Batt is awesome, instead of starting at 4.2v and the Batt constantly going down in voltage, this can only be a plus to any mechanical mod how I see it.

 

[revolver]

1. My springs aren´t here yet but they are on their way, very very close; I can "feel" it... I have delivered a sort of 'mailing' sixth-sense with vaping, haaaa!!!

I said "my" springs, however it is mine and a friend's... And, despite not having the PP-switch springs yet, my friend, who happens to be the best modder in Argentina and a genius, has made two ad hoc springs, SO:

Finally... I AM PrecisePlused !!!

Heaven; Oh! My...! Oh, MY....!!!!

Perfection...

DAVID... You are PUUURE ROCKANNNNDRRROLL !!!!

2. One question:

I had this atty which would have the center pin a bit "going inside" and would regularly have to force back out with a pin because it will not fire in many mods; not making contact... With my PP18,5, it may very well cause the unit to get "plugged" firing... Not really a problem coz I won't use this atty with my mod...

However, I was curious on what was happening, and I think I might have read something David posted about this or how to avoid it or something but could not find the post...

Anyone... !?

Thanks. =)

 

[mwa102464]

Revolver,

Don't over tighten your Atty's, there is a small silicone grommet under the center pin and when the pin of the 510 connector on a PV hits the center pin on the Atty it can push the center pin in on the Atty, so just screw your Atty's on till they make contact or a tad more, this will help from crushing that grommet under the center pin on your Atty's.

 

[revolver]

Revolver,

Don't over tighten your Atty's, there is a small silicone grommet under the center pin and when the pin of the 510 connector on a PV hits the center pin on the Atty it can push the center pin in on the Atty, so just screw your Atty's on till they make contact or a tad more, this will help from crushing that grommet under the center pin on your Atty's.

Yeeep; that DID it; heeee !!!!

Thanks.

PS: I over-tight my atties all the time... I kinda feel the tighter they are, the more power my PV will deliver; heeee...! So silly; And even when I do know for a fact this is not necessary, well... "My brain" doesnt wanna listen, heeee. It keeps telling me that otherwise liquid will make it between the atty and Pv and interfere with the connection, haaa!!! I will try to leave my bad -and stupid- habit behind... =)

 

[forcedfuel50]

After a few days:

I was a little apprehensive about the new finish in pictures, but in the hand it is exceptionally nice. I pick up my old shiny one now and it kinda feels greasy even though its clean. With a bottom button, especially one needs a little grip and the new finish provides for that well. I had it out in the sun yesterday and it has a nice shimmer to it. The upgrades David has done with the Plus range are major and take the mechanical device to a whole new level!

Once again David has outdone himself....

thank you for the kind words Vapn, glad you are liking the new Finish! I like both the old shiny finish and the new finish as well, both have their pro's and cons.

 

[forcedfuel50]

Thanks Dave -- now I know you're a vendor with values! Battery order coming up..... Will this be the mod I win?!?!?!?

Thanks Ripple, good luck on the contest!

 

[forcedfuel50]

In light of vapn's post above, I was just noticing again yesterday the fantastic finish on my Plus 18350. One huge advantage is that it doesn't slip in your hand the way the shiny ones can, not to mention that the brushed finish is just very nice looking. This Plus 18350 is my very favorite all-mechanical Mod and I don't think it can be improved upon. I was also noticing how easy the button is to push so that even folks with a little arthritis very likely needn't worry. For me, the bottom button is the only way to go, no fishing around for a side button any more with every vape! So take all this for what it is, just another well deserved kudos to David and his Mama for designing and manufacturing by far the best of the best of all mechanical Mods! This one just cannot be improved upon!

Thank you so much womenfolk! I'm glad that little P+18350 is serving you well!!! Now on the improved upon, i do have a few ideas ;-) LOL

 

[forcedfuel50]

Yesterday, after using nothing more than a decent mini for the last three months, I opened a package containing my very first mod: an 18500. Inside the box was a packing slip signed "thanks! Dave," which I thought was a nice, personal touch. After finally having enough time to charge up some batteries this morning, all I can say is....WOW!

It's amazing to me that such a beautifully designed and manufactured device can be such a hard-hitting, vaping monster......with nothing more than a plain-vanilla boge 2.0 ohm carto. I agree with all the raves about the finish. It's completely impervious to fingerprints. The silky-smooth texture provides a nice degree of grippiness, and it's attractive without resorting to "hey, look at me!" bling. There's a subtle elegance in the details of the P+ line that I haven't seen in any other vaping product. From the softly glistening finish and gentle breaks in the cylinder, to the recessed 510 connection and dovetailing of the bottom-button, everything screams quality design and manufacture in a quiet whisper.

Super T's Precise + line is well and truly.....beauty and the beast. A million thanks, Dave! Only one problem......after having gone straight to the top, I may have been spoiled for anything else.

"Beauty and the Beast" That has a nice ring to it. On the beast part, it isn't just the power of suggestion or placebo effect as i finally did some testing last night and the P+ does out perform in it's ability to hold higher voltages under load. I'll post them up in a bit.

 

[Vaporologist]

Thank you so much womenfolk! I'm glad that little P+18350 is serving you well!!! Now on the improved upon, i do have a few ideas ;-) LOL

Oh yea? Not possible, I dare you

 

[forcedfuel50]

P+18650 update. For those who didn't get theres sent out last friday(you would have received tracking information) they remainder will all be finished and shipped this week.

 

[Vegastar]

P+18650 update. For those who didn't get theres sent out last friday(you would have received tracking information) they remainder will all be finished and shipped this week.

Any chance of more P+18500 this week? I know you're unlucky with estimates, but give me *some* hope for this paycheck. Please?

 

[artyoh]

Thank you so much womenfolk! I'm glad that little P+18350 is serving you well!!! Now on the improved upon, i do have a few ideas ;-) LOL

Yup, that one's easy: (finish) matching accessories and a tank......don't ya just love all the nagging you get on these threads?


Actually, I guess it does beat the alternative.

 

[strprswpr]

Got show off some new stuff I got.....

 

[Vaporologist]

Nice work strpr!

I like your flat bottom caps with tapered top caps look a lot!

 

[snork]

The P+ 18650 is a fistful of power.