- Status
Danno/Chris:
Any idea where I can get my hands on some of this 5mm wick used in the Drunkard?...I need about 50'...
Any idea where I can get my hands on some of this 5mm wick used in the Drunkard?...I need about 50'...
im doubling 2mm wick found on ebay for $0.60 cents a foot. 50' cost $38.05 shipped.... The biggest I have seen on ebay is 3.5mm
Last edited:
Thanx Kim...I put the wick I pulled out of the Drunkard into a T3 head, and its bliss with Boba's..
have been using 100% cotton rounds and cutting them in a spiral circle .... works really well as long as you keep it wet
Thanks for the tip also
NEW! SMOKtech DRUNKER rba 5ml Rebuildable Atomizer
Only $14.95
Its a beautiful albeit unusual shape that can be adorned with your choice of 510 drip tips - The DRUNKER 5ml Rebuildable Atomizer. The name has its root in its shape which resembles a beer bottle - all we have to say is its much better than calling it a SCREW TANK!
The Drunker utilizes twin wicks that provide 4 wick leads that slip though the metal plate into the 5ml tank. It features a ceramic cup with a bottom two holed grommet through which you insert your coil leads. This looks fairly easy to recoil and wick and may be a great beginning RBA at a GREAT price. We are also carrying silica wick/coil packets for you to purchase separately or use your own!
Early reports on the Drunker are that it is virtualy leak free and we suspect that may be due to the fact that you CANNOT unscrew the tank off the base so you have a solid seal there. The material seems to be a thick PC (poly carbonate) but we would be careful not to use juice in these that have caused problems with other cartomizers and tanks.
Have a DRUNKER and get DEC'd! (Drunker Enthusiast Club - we are referring to quite a nice little DRUNKER enthusiast thread started on ECF by member adeline
Your DRUNKER comes pre-coiled with silica wicking and a 2.4ohm wire. 1.7, 2.5 and 3.2 ohm coil/wick packets available elsewhere in this category below the DRUNKER listing.
yep..........I be a bumpin dese
Do we know where we might find some replacement (What appears to be 5mm) silica rope for these drunker's?
Guys... I use an APV (Lavatube) I need this tank.
In the closeups it looks kinda biggg...
Can anyone post it's dimensions??? (I would like to compare its height with the T3 Kanger, which I use with a 510-eGo adapter)
Thanks
In the closeups it looks kinda biggg...
Can anyone post it's dimensions??? (I would like to compare its height with the T3 Kanger, which I use with a 510-eGo adapter)
Thanks
I lost the insulator piece for the wire, is there anywhere that I can get a replacement?
Sent from my iPhone using Tapatalk 2
Sent from my iPhone using Tapatalk 2
Guys... I use an APV (Lavatube) I need this tank.
In the closeups it looks kinda biggg...
Can anyone post it's dimensions??? (I would like to compare its height with the T3 Kanger, which I use with a 510-eGo adapter)
Thanks
It's not as big as it looks on the site, I would say its a little shorter than a T3. I can confirm that when I get home from work today
Sent from my iPhone using Tapatalk 2
Thanks bro...
looking forward to your confirmation...
Is it with the drip tip or without?
Let me know how it feels...
Cheers
It's just slightly taller than a T3 with drip tips on
Sent from my iPhone using Tapatalk 2
It's just slightly taller than a T3 with drip tips on
Sent from my iPhone using Tapatalk 2
Thanks a million
really helpful bro.
Hi fellow vapers...
I'm seriously thinking about getting the drunker. but I want to do some clarifications if you could clarify some things would be a great help
where are the vent holes situated? I have a Apollo vtube an I have a feeling that the tank will sit flush on the device. so if you could please tell me where the vent holes are would save me a lot of trouble and money spent on shipping this item
and also I saw some threads (check here) where people kept complaining that the tank leaks badly when set on its side. Have you encountered anything of that sort?
I have 2mm silica wick, if I double it say 4mm will it be enough for the 4 holes of the drunker, so that the juice wont leak?
any help is highly appreciated.
Many thanks
I'm seriously thinking about getting the drunker. but I want to do some clarifications if you could clarify some things would be a great help
where are the vent holes situated? I have a Apollo vtube an I have a feeling that the tank will sit flush on the device. so if you could please tell me where the vent holes are would save me a lot of trouble and money spent on shipping this item
and also I saw some threads (check here) where people kept complaining that the tank leaks badly when set on its side. Have you encountered anything of that sort?
I have 2mm silica wick, if I double it say 4mm will it be enough for the 4 holes of the drunker, so that the juice wont leak?
any help is highly appreciated.
Many thanks
Hi fellow vapers...
I'm seriously thinking about getting the drunker. but I want to do some clarifications if you could clarify some things would be a great help
where are the vent holes situated? I have a Apollo vtube an I have a feeling that the tank will sit flush on the device. so if you could please tell me where the vent holes are would save me a lot of trouble and money spent on shipping this item
and also I saw some threads (check here) where people kept complaining that the tank leaks badly when set on its side. Have you encountered anything of that sort?
I have 2mm silica wick, if I double it say 4mm will it be enough for the 4 holes of the drunker, so that the juice wont leak?
any help is highly appreciated.
Many thanks
They are located on the 510 connection ONLY. X2
If your using 2mm silica, I would indeed double up. I have mine wicked with Cotton Yarn, and it does not leak at all, because of the expansion characteristics of the cotton. Vapes great, I might add. These really are a sweet little RBA. Hard to beat for the money..
thanks for the reply.
But if my device has a sealed well and there is no airflow inside the thread
this will be an issue right?
coz I will not get any airflow at all?
- Status
Similar threads
- Locked
- Locked
