loving the stardust R, working well over here as well, hope you all have a great time with them.
NEW! Vision Stardust ego 2.0 replaceable coil and tube - NOW IN STOCK!!
- Thread starter melloyello
- Start date
- th_trl_thread_readers 0
-
- Tags
- provari
- Status
I'll get to try one soon. I helped my SIL place a smallish GV order last night, and she ordered a new stardust R for both of us. Can't wait!
And y'all probably already know this, but for the version before this one, I was trying to dry burn it the other night, and couldn't keep the silicon cap lifted up, so I just took it out completely. Well, when I did that, the O ring that was in there where the mouthpiece screws in....came out, and I couldn't get it back in at the right place. While trying to do so I eventually dropped it, and couldn't find it anywhere. I thought, well......lemme try it without that and see if it leaks. It didn't! I screwed the top back on, have left it on it's side. I don't know if that is there primarily just to kind of squeegie the juice off the mouthpiece when you pull it out, or for some other reason, but I haven't found any detriment to not having it, and it's been several days. So don't think your stardust is ruined if you should happen to lose yours.
And y'all probably already know this, but for the version before this one, I was trying to dry burn it the other night, and couldn't keep the silicon cap lifted up, so I just took it out completely. Well, when I did that, the O ring that was in there where the mouthpiece screws in....came out, and I couldn't get it back in at the right place. While trying to do so I eventually dropped it, and couldn't find it anywhere. I thought, well......lemme try it without that and see if it leaks. It didn't! I screwed the top back on, have left it on it's side. I don't know if that is there primarily just to kind of squeegie the juice off the mouthpiece when you pull it out, or for some other reason, but I haven't found any detriment to not having it, and it's been several days. So don't think your stardust is ruined if you should happen to lose yours.
Day 3 with the Stardusts ........
Using both of my Stardusts now, one with Dekang Tab and the other with Belgian Cocoa.
Overall, I'm very happy with these. Am ordering more so I have a backup and a backup of the backup.
Using both of my Stardusts now, one with Dekang Tab and the other with Belgian Cocoa.
- The Belgian Cocoa with the 2.4ohm atty is perfect. Running it on an Ego-C battery. Never have I tasted this juice as this cocoa-ey The juice gets dark after a little bit of vaping. Most probably due to caramelization. Doesn't vape bad but gets thicker as it gets used up. May need to clean this one more often.
- The DK-Tab, while good, I think will benefit from either a higher resistance atty or a VV (thinking of getting an Ego Twist just to try). The juice is on the lighter side so doesn't get darker.
Overall, I'm very happy with these. Am ordering more so I have a backup and a backup of the backup.
Day 3 with the Stardusts ........
Using both of my Stardusts now, one with Dekang Tab and the other with Belgian Cocoa.
- The Belgian Cocoa with the 2.4ohm atty is perfect. Running it on an Ego-C battery. Never have I tasted this juice as this cocoa-ey
- The DK-Tab, while good, I think will benefit from either a higher resistance atty or a VV (thinking of getting an Ego Twist just to try). The juice is on the lighter side so doesn't get darker.
Overall, I'm very happy with these. Am ordering more so I have a backup and a backup of the backup.
I have not tried the Stardust yet. Probably get mine in a day or two. Ordered some over the weekend. Just had to comment on the Cocoa. It is awesome but I can't handle it by itself. My lungs don't seem to take well to any 70/30 so I mix what I can with 100% VG juices to take the edge off for me. I mix it with Espresso and Raspberry and it is an awesome combo.
I got 3 on Saturday, along with 3 2.4 of the long wick vivi heads. I used both the short wick heads that came with them, and the long wick vivi heads on an Ego Twist. They both work great. I think I actually like them better than the Ego C atty/tank system, which was better than the older Visions.
Disassembling them and cleaning them is a breeze. They're very sturdy and well built.
I want to order more, but I'd like to get them with the 1.8 heads, and prefereably with some different colors to color code juice. Any idea if and when that'll be possible?
Great job GotVapes!
Disassembling them and cleaning them is a breeze. They're very sturdy and well built.
I want to order more, but I'd like to get them with the 1.8 heads, and prefereably with some different colors to color code juice. Any idea if and when that'll be possible?
Great job GotVapes!
I bought one of these with a shipment just to give it a try, before realizing it was the new one. Now based off of all of these reviews, im facepalming for not buying more then just one.
That's because they said they were going to get some.... not that they had come in yet
I love the new Stardust. They vape great easy to fill and clean. I love them for work and to go out. Between these the bc phoenix and the vivi tank I couldn't be more happy. Fuss free and worry free vaping (no tinkering )Interchangable parts make it even better. If you haven't tried these...... try one they are awesome
Curious question .....
So I have 2 rebuildable Stardusts. One (#1) has a looser draw which is what I prefer, while the other (#2) has a much tighter draw.
Is there a way to alter the "draw" of the Stardusts? I cleaned #2 and while it loosened the draw a tiny bit, still not close to the loose draw of #1.
So I have 2 rebuildable Stardusts. One (#1) has a looser draw which is what I prefer, while the other (#2) has a much tighter draw.
Is there a way to alter the "draw" of the Stardusts? I cleaned #2 and while it loosened the draw a tiny bit, still not close to the loose draw of #1.
Chris or Danno,
I've got a question concerning which replacement heads that will ultimately be available. I got the 1.8s and 2.8s in addition to the 2.4s that came with the full unit. The former two are long-wicked and have a visibly different design than the 2.4s, and lack the metal "cone" head in the seal; I believe it was mentioned previously that the 1.8s and 2.8s are actually Vivi Nova heads,and the 2.4 is an actual Stardust head. Which design will we ultimately be getting for Stardust replacements? (I prefer the "Stardust" style, FWIW)
Also, regarding the wicks on the 2.4s: on most of those I received, one side of the wick appears to be normal "short" length (compared to the previous version Stardusts), but the other is too short, and barely protruding from the slot. Has this been addressed with the factory for the next run of replacement heads?
I've got a question concerning which replacement heads that will ultimately be available. I got the 1.8s and 2.8s in addition to the 2.4s that came with the full unit. The former two are long-wicked and have a visibly different design than the 2.4s, and lack the metal "cone" head in the seal; I believe it was mentioned previously that the 1.8s and 2.8s are actually Vivi Nova heads,and the 2.4 is an actual Stardust head. Which design will we ultimately be getting for Stardust replacements? (I prefer the "Stardust" style, FWIW)
Also, regarding the wicks on the 2.4s: on most of those I received, one side of the wick appears to be normal "short" length (compared to the previous version Stardusts), but the other is too short, and barely protruding from the slot. Has this been addressed with the factory for the next run of replacement heads?
Mine 2.4's have the same inconsistency in wicks length as yours.
Hi Randy---all of the heads now listed as Stardust heads are now dedicated stardust heads with the steel pip...as far as the wicks we will talk with the factory and try to get some consistency on short/long wicks. On the Nova heads they actually sent us about half/half. We'll get that straightened out. Chris deals with our manufacturer on that and I am pretty sure he has already spoken to them about that.
One of my 2.4s also have differing length wicks. Oddly enough, that's the one with the looser draw than the one with even length wicks (which has tighter draw).
Just ordered another rebuildable Stardust plus 3 2.4 heads. I need backup for my backups.
Just ordered another rebuildable Stardust plus 3 2.4 heads. I need backup for my backups.
Thanks Danno!
I find I do prefer the steel pip (we gotta standardize the term, "conehead" or "pip"
). My 1.8s (which are awesome on a standard Ego, BTW) flood occasionally.
I find I do prefer the steel pip (we gotta standardize the term, "conehead" or "pip"
). My 1.8s (which are awesome on a standard Ego, BTW) flood occasionally.
Chris or Danno.
I think I have somewhat a better understanding of what's going on with one of my Stardusts.
First, I intentionally filled it up to half tank only so it will miss the wick by a mile.
Then get it upside down to charge the wick. Get it upright and vape a couple of times till I detect a slight loss of flavor.
Tilt it upside down again to recharge the wick then vape.
These steps work pretty well for a couple reasons. I don't get that gurgling sound while taking a draw. The vapor is good, just like when it was new.
What I think now is that it's overwicking or flooding the coil, i.e. too much e-juice is getting to the coil thus giving it a sense of being "clogged" and not producing the same vapor. I can't vape this specific Stardust horizontally where the e-juice is touching the wicks constantly.
Based on that info, do you know of a way to adjust the coils or wick or something else to get it to work like it used to?
I got more heads on the way so am not too worried. Posting this just in case someone has a solution.
I think I have somewhat a better understanding of what's going on with one of my Stardusts.
First, I intentionally filled it up to half tank only so it will miss the wick by a mile.
Then get it upside down to charge the wick. Get it upright and vape a couple of times till I detect a slight loss of flavor.
Tilt it upside down again to recharge the wick then vape.
These steps work pretty well for a couple reasons. I don't get that gurgling sound while taking a draw. The vapor is good, just like when it was new.
What I think now is that it's overwicking or flooding the coil, i.e. too much e-juice is getting to the coil thus giving it a sense of being "clogged" and not producing the same vapor. I can't vape this specific Stardust horizontally where the e-juice is touching the wicks constantly.
Based on that info, do you know of a way to adjust the coils or wick or something else to get it to work like it used to?
I got more heads on the way so am not too worried. Posting this just in case someone has a solution.
- Status
Similar threads
- Locked
- Locked
- Locked
- Locked
