NotCigs refugee thread
- Thread starter FranC
- Start date
- th_trl_thread_readers 0
- Status
Added to my list too Fran! Sleep well 
Wuzz, I'll probably end up having to scrape down the cinder block wall and use a crap ton of hydrolic cement from the inside. When I patched some spots from the inside during the spring thaw, I didn't properly prep it. I just slung and payed
The good thing is that it's not bad for as much rain as we've gotten.
Hi Oly and Salem!
Wuzz, I'll probably end up having to scrape down the cinder block wall and use a crap ton of hydrolic cement from the inside. When I patched some spots from the inside during the spring thaw, I didn't properly prep it. I just slung and payed
The good thing is that it's not bad for as much rain as we've gotten. Hi Oly and Salem!
Prayers for the Grandbaby Fran !!!!!!!!!!!
Got some Koh Gen Doh coming from Osaka....I really like the Chaddos but the price is 10X the KGD....
So my coiling area is crowded....Thinking about offering my custom tension coiler for sale...After all the hoopla the juice just wasn't worth the squeeze on the tensioned coils..They look and perform great....changing between sizes is where my custom built unit hit that old snag.....namely I was tired of fekking with it...Back came the Coil Master...I was wanting some ceramic tweezers sos I could squeeze the coil while holding down the fire button...Well they're expensive....Being the Coil Master comes in a kit with tweezers and everything else needed....yeah....I ordered a kit....Maybe my area will be a little cleaner now....Probably not though
Now I need a barrel for a KSM....and some other stuff....plenty of other stuff
Got a fresh from the tub Spike belly up and snoring in my lap....All hail King Spike!! aka Biggie Smalls
Rain and storms continued today...Not beeching....Just sayin
The dryer just cut off so back too my domestic duties......
Got some Koh Gen Doh coming from Osaka....I really like the Chaddos but the price is 10X the KGD....
So my coiling area is crowded....Thinking about offering my custom tension coiler for sale...After all the hoopla the juice just wasn't worth the squeeze on the tensioned coils..They look and perform great....changing between sizes is where my custom built unit hit that old snag.....namely I was tired of fekking with it...Back came the Coil Master...I was wanting some ceramic tweezers sos I could squeeze the coil while holding down the fire button...Well they're expensive....Being the Coil Master comes in a kit with tweezers and everything else needed....yeah....I ordered a kit....Maybe my area will be a little cleaner now....Probably not though
Now I need a barrel for a KSM....and some other stuff....plenty of other stuff
Got a fresh from the tub Spike belly up and snoring in my lap....All hail King Spike!! aka Biggie Smalls
Rain and storms continued today...Not beeching....Just sayin
The dryer just cut off so back too my domestic duties......
Got an email and shipping notice from Osaka....addressed too Terry San....Hey..Cheap as any and free shipping from Japan....
The juice flubs have been many....In the early days I vaped my share of Atomic Cinnicide....Get a drop of that on your hands and transfer it to your glasses....Why's the side of my head on fire???? Little splashed into your eye is epic as well....Funny how Cinnicide is the only juice I've ever gotten into my eyes....
My cousin moved back here from the big city a couple three years ago...Retired and began a grass cutting venture...New truck then another new truck....new car...new house...jacked up new mowers for the business....Then he went bat sheet cray cray...He'd financed all that stuff and since he was becoming a resident of the rest home it fell on us boys to secure his assets...He'd added every imaginable do dad too a new Chevrolet 4X4....My assignment was to take all that off and re-install the factory stuff...Good thing it was a Chevy and one dude bought everything from a CL add I posted...I managed to score a train horn in that deal...Note that just because you can fire a welder up that doesn't necessarily make you a welder....The train horn installer jacked up the air tank with some mounting brackets...I coulda' un-jacked it but would have always been skeptical of a jacked up tank sitting on 150psi...What could go wrong??????? Yesterday I got the call too weld on two converters at the junkyard...The guys were stripping down a Honda that had air ride...Yeah I scored the tank!!!! The other one is going in the jacked up pile....Thinking I really should go by the accessory store that installed it and throw it in the parking lot....
The juice flubs have been many....In the early days I vaped my share of Atomic Cinnicide....Get a drop of that on your hands and transfer it to your glasses....Why's the side of my head on fire???? Little splashed into your eye is epic as well....Funny how Cinnicide is the only juice I've ever gotten into my eyes....
My cousin moved back here from the big city a couple three years ago...Retired and began a grass cutting venture...New truck then another new truck....new car...new house...jacked up new mowers for the business....Then he went bat sheet cray cray...He'd financed all that stuff and since he was becoming a resident of the rest home it fell on us boys to secure his assets...He'd added every imaginable do dad too a new Chevrolet 4X4....My assignment was to take all that off and re-install the factory stuff...Good thing it was a Chevy and one dude bought everything from a CL add I posted...I managed to score a train horn in that deal...Note that just because you can fire a welder up that doesn't necessarily make you a welder....The train horn installer jacked up the air tank with some mounting brackets...I coulda' un-jacked it but would have always been skeptical of a jacked up tank sitting on 150psi...What could go wrong??????? Yesterday I got the call too weld on two converters at the junkyard...The guys were stripping down a Honda that had air ride...Yeah I scored the tank!!!! The other one is going in the jacked up pile....Thinking I really should go by the accessory store that installed it and throw it in the parking lot....
Morning folks
Dee, I love the visual of all 6'3" of you with a snoring King Spike in your lap
LOL Wharf! Yeah, this one was in my hand as I shook it, I didn't even have my finger plugging the drip tip hole as I normally would. All over my desk, monitor, keyboard. The hardwood floor is shiny near my desk tho
I may end up giving my black istick an alcohol bath from the other night that the modded rba dumped it's contents while it was on it. No problems with it so far, but the fire button feels less clicky. Fortunately I met a good solderer at the new vape shop...just in case
Dee, I love the visual of all 6'3" of you with a snoring King Spike in your lap
LOL Wharf! Yeah, this one was in my hand as I shook it, I didn't even have my finger plugging the drip tip hole as I normally would. All over my desk, monitor, keyboard. The hardwood floor is shiny near my desk tho
I may end up giving my black istick an alcohol bath from the other night that the modded rba dumped it's contents while it was on it. No problems with it so far, but the fire button feels less clicky. Fortunately I met a good solderer at the new vape shop...just in case
LD, your posts always bring a smile to my face. Your descriptive writing and humor is just one of a kind
That is some funny sheet. Not sure if any of you remember Stifle? He is from back in the day lol Anyway, he was always struggling to stay off the cigs. I made him some hot cinnamon juice to see if it would help. I sent it in a 10 ml bottle that happened to be the exact same size as his eye drops. You guessed it! He actually mistook the juice for his eye drops and dropped some drops in his eye. He was scared to death that he had done some damage. After we made sure that he was okay, we laughed for months ( maybe even years) over that one. I know that Tt and some of the oldtimers from TTs House would remember the incident
I sure do miss Stifle. He originated from the old FSUSA gang. He was always such a hoot. So many people from days of old that I often wonder about ...........
That is some funny sheet. Not sure if any of you remember Stifle? He is from back in the day lol Anyway, he was always struggling to stay off the cigs. I made him some hot cinnamon juice to see if it would help. I sent it in a 10 ml bottle that happened to be the exact same size as his eye drops. You guessed it! He actually mistook the juice for his eye drops and dropped some drops in his eye. He was scared to death that he had done some damage. After we made sure that he was okay, we laughed for months ( maybe even years) over that one. I know that Tt and some of the oldtimers from TTs House would remember the incident
I sure do miss Stifle. He originated from the old FSUSA gang. He was always such a hoot. So many people from days of old that I often wonder about ...........
Last edited:
My little great-grandaughter asked her Mom how come they had so much new stuff. It's great she can see so much better in the one eye even with the bubble over it.
Continued prayers and well wishes for the Grandbaby Fran !!!!!!!!!!
This lemo II...Over on the thread they say invert it too fill....For the life of me I can't figure out how you're gonna fill it with the fill port at the bottom...I've tried every imaginable way to fill it....Always a few good drips from the air hole after filling....It's a World Record Holder for juice consumption as well...A bottom feed RTA has limitations when it comes to juice channel size....Obviously the L II has crossed that line....It's great if you don't mind wasting a few paper towels after each fill...Thinking I may pull the lemo Drop off the bench....It performed well and being it's black it looked great on my Stick 50...If a PV set up can look great that is....
Hammer down today....stacking up that spare change for those bills....
This lemo II...Over on the thread they say invert it too fill....For the life of me I can't figure out how you're gonna fill it with the fill port at the bottom...I've tried every imaginable way to fill it....Always a few good drips from the air hole after filling....It's a World Record Holder for juice consumption as well...A bottom feed RTA has limitations when it comes to juice channel size....Obviously the L II has crossed that line....It's great if you don't mind wasting a few paper towels after each fill...Thinking I may pull the lemo Drop off the bench....It performed well and being it's black it looked great on my Stick 50...If a PV set up can look great that is....
Hammer down today....stacking up that spare change for those bills....
I did something that I have never done before....went to bed with empty Kayfuns!!!
Guess who woke up and had to fiddle by bedside light with screwdrivers and tiny screws right outta the sheets?
Guess who will never let that happen again?!?!
Guess who woke up and had to fiddle by bedside light with screwdrivers and tiny screws right outta the sheets?
Guess who will never let that happen again?!?!
Oh, that is so cool! It reminds me of when I took my mom for her cataract surgery. We had to take my son to work on the night shift. He was a teenager at the time. My mom was SO amazed by all of the colors that she could actually see. Did not even know what she was missing until after the surgery. I am sure it is a whole new world to your GGD
@ LD and Tracy, exactly why I will stick to my subtanks for now
Good morning, all.
- Status
