Now I ain't for sure.....I think to measure a belt start at the end near the buckle and measure to the center most hole.....Pretty dang sure no two belts are measured the same though....I like a little bling bling on my belt and black leather is a must....Current belt has Jack Daniels Old #7 silver dots....it's served it's purpose well for a long time.....Some of the HD belts are sweet....JD's are as well but you're gonna spend the whole $80 and there isn't but one choice....Shepler's or something like that....This one I got on came straight outta Lynchburg, Tennessee...Got my eye on a couple of vintage brass HD buckles as well...One must first have a suitable belt....
Second batch of cold brew is down.....A Capresso Infinity holds @ 1/2 lb. of beans when stuffed too the brim....Grind a little and dump....then grind a little more....No spills this time....bag squeezed into the pitcher and there is a 1/2 gallon of water with plenty of room to spare....This is all working out great....Thanks Mark!!!!
The VCT 75 door screws in.....I massaged it all I could trying to get the threads liking each other....Over the years I've found anytime two types of metal are gonna be connected by threads there is likely gonna be an issue...The door is stainless and known for it's hardness....The body is probably a zinc alloy....meaning it's a bunch of metal that's generally worthless melted together and cast into a mold....Not the best for threading...Now all is good atm and I got it threaded on after a bit...I still have battery #1 in there and it's a shade under 1/2 after multiple tankfulls...AWTs get two thumbs up....Issues with the door will either get better or worse....I'm adding a little machine oil next battery....ground circuit be damned....Got new wicks in the KF5s as well....Mileage there is great as well....
Second batch of cold brew is down.....A Capresso Infinity holds @ 1/2 lb. of beans when stuffed too the brim....Grind a little and dump....then grind a little more....No spills this time....bag squeezed into the pitcher and there is a 1/2 gallon of water with plenty of room to spare....This is all working out great....Thanks Mark!!!!
The VCT 75 door screws in.....I massaged it all I could trying to get the threads liking each other....Over the years I've found anytime two types of metal are gonna be connected by threads there is likely gonna be an issue...The door is stainless and known for it's hardness....The body is probably a zinc alloy....meaning it's a bunch of metal that's generally worthless melted together and cast into a mold....Not the best for threading...Now all is good atm and I got it threaded on after a bit...I still have battery #1 in there and it's a shade under 1/2 after multiple tankfulls...AWTs get two thumbs up....Issues with the door will either get better or worse....I'm adding a little machine oil next battery....ground circuit be damned....Got new wicks in the KF5s as well....Mileage there is great as well....