Odysseus official
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
-
- Tags
- halo madvapes provari revolution
- Status
emmmm, you misunderstoonding me vapor
Hehe... But I knew what you meant and you are 100% right!
Hi Imeo,
I have been reading various posts about those little o-rings and plastic washers and realized I did not use the tiny plastic washer that came with the Ody. Reassembled it the way that the washer is under the metal/ceramic and the o-ring is in the ceramic under the nut. Finally a good alignment. Thank you for being patient with me and sorry for posting the pic of my bad assembly. My humble apologies, sir!
The Ody is wonderful. I have been vaping nothing else, but Ody the whole weekend.
Pic of new assembly:
I have been reading various posts about those little o-rings and plastic washers and realized I did not use the tiny plastic washer that came with the Ody. Reassembled it the way that the washer is under the metal/ceramic and the o-ring is in the ceramic under the nut. Finally a good alignment. Thank you for being patient with me and sorry for posting the pic of my bad assembly. My humble apologies, sir!
The Ody is wonderful. I have been vaping nothing else, but Ody the whole weekend.
Pic of new assembly:
I knew that you knew and you knew that I knew. Its always good to know at the end vapor axaxaxa
ps..... I am starting playing with words in English, thats an improvement maybe
ps..... I am starting playing with words in English, thats an improvement maybe
I am always glad when me or other GG friends around give their help to other GG people. And I fell even better when issues are solved in a so nice and easy way. GGvaping buddy
Hi Imeo,
I have been reading various posts about those little o-rings and plastic washers and realized I did not use the tiny plastic washer that came with the Ody. Reassembled it the way that the washer is under the metal/ceramic and the o-ring is in the ceramic under the nut. Finally a good alignment. Thank you for being patient with me and sorry for posting the pic of my bad assembly. My humble apologies, sir!
The Ody is wonderful. I have been vaping nothing else, but Ody the whole weekend.
Pic of new assembly:
yes, I have notice that too with Ody and Penelope river. Its getting better every day. And dont forget the trick about 6 volts. If you see a drop in performance at 3,7 volts, hit is for 1/2 hour at 6 volts. Then try again at 3,7 volts and it will vape wonderful again
imeo even with my janky messy half burnt coil ody is vaping well, i cant wait till i have my wire and mesh
soooooo much vapour in here looks like a Dutch brothel lol been on it all weekend schweeeeeeet ..... quick question the ggts stealth top rethreader will i need the connector pin or is it included with the stealth top ??? there are so many parts as spares its unclear what you get with the ggts could you help pleeease what will i need to buy to use this with oddyin stealth mode
Last edited:
Or just keep vaping it at 6v! Basically no matter what resistance coil I build, I'll start it at 3.7, vape it for a tank or 2, crank open the juice control, bump her up to 6v, and vape myself silly until I need a refil! Then after a few tanks at 6v, I'll bump it up to 7.4! I had the same coil going for over 2 months in Ody that way, and only uninstalled it once I realized that I didn't have enough top tubes to stack 3 18650s like I wanted to!
For new Ody users, I know most of you wouldnt dream of vaping a 1.5ohm atomizer at 6v, but you gotta understand that odysseus is a truly next level device and can handle wattages greater than ANYTHING else on the market! So if you want more th and vp than you're getting at 3.7v, you gotta take my word for it and just bump up the voltage, you won't look back.
stealth rethreater is the piece that allows to the cap to be connected on the boddy stum. The cap itself is ready to be used, that means that it includes the insulator and the center pin
rick, we totally agree buddy. Things are exactly as you said and I do exactly what you do.
axa, thanks rick, you too buddy. But what you said is a reality. Ody and Penelope can handle any volts, so I dont see a reason for people to change their wicks often as they do with other devices.
thank you sooooo when i buy the ggts apart from batteries is everything else required to vape the oddy included ?i know i will need the oddy/ggts base to make a stronger unit... sorry to keep on but i want to get it right first time so i can order all while availability is good .. give your self a pat on the back imeo .... dont you ever sleep??
I sleep when I remember that I have to do it stum
GGTS is ready to vape but while you will wait for Ody base you can buy a 901 to 510 adapter so you will be able to use air control of GGTS
GGTS is ready to vape but while you will wait for Ody base you can buy a 901 to 510 adapter so you will be able to use air control of GGTS
Agreed! For instance, even though a 2ohm coil at 7.4v might sound insane and unpleasant, if the coil is old, it's going to perform like at hight voltages similarly to how it did when it started life at 3.7v!
Thats what I am trying to say for months Rick. For example I now vape 1,2 ohms at 6 volts and in a while I will put 7,4 volts on it. Coil is at 0,2mm so it cant get burned and I dont have burning taste at all because I just open more the juice control. Life is good with Ody and Penelope
- Status
