Odysseus official

[Vaporologist]

Chaos, if there are any delays for the release of this product, I will blame you personally

 

[ChaosAffect]

Chaos, if there are any delays for the release of this product, I will blame you personally

Jebus, I hope he doesn't try to do something like this before shipping. Who knows, I may end up loving the feel of the standard tip.

 

[Repent]

I use Ming tips exclusively. I have two SS ones from COV for my UFS's. With the o-ring in place it's a pretty snug fit. I've been using DC from COV and it's snug enough when installed that I can turn and tighten the DC. I've made it a habit to twist the Ming clockwise when installing it to keep from unscrewing the DC. I've noted the Ming is snug in various other atty's and cartos as well. YMMV

Imeo, what is the inside diameter (ID) of the mouthpiece/juice control stem piece? I just did a ruler measurement on a DC from COV and the ID is 8mm.

A downside to this setup is the extra height you'd get by adding the Ming onto what is already considered the mouthpiece. For me I think that would detract from the whole stealth mode/ninja style vaper I plan on using at work. Course I'll try it either way.

 

[wigglr]

I use Ming tips exclusively. I have two SS ones from COV for my UFS's. With the o-ring in place it's a pretty snug fit. I've been using DC from COV and it's snug enough when installed that I can turn and tighten the DC. I've made it a habit to twist the Ming clockwise when installing it to keep from unscrewing the DC. I've noted the Ming is snug in various other atty's and cartos as well. YMMV

Imeo, what is the inside diameter (ID) of the mouthpiece/juice control stem piece? I just did a ruler measurement on a DC from COV and the ID is 8mm.

A downside to this setup is the extra height you'd get by adding the Ming onto what is already considered the mouthpiece. For me I think that would detract from the whole stealth mode/ninja style vaper I plan on using at work. Course I'll try it either way.

I totally agree, Ming's are the tightest fitting drip tips I have ever used! These would work for Chaos's idea for using our own drip tips

 

[sportyfortyeight]

I hunted but couldn't find my answer. Will the Odyssey have ct like the Ufs built in so it screws onto the ggts like the Ufs does?

Sent from my PC36100 using Tapatalk

 

[krnxguhj33]

I read through this entire thread and I'm still lost. To clarify, I'm not a part of the GG family but I'm quite intrigued. I do have some questions though.. What is UFS and how does it work? Is the Odysseus a tank system that uses a regular atomizer as the heating component? I'm so lost...

 

[fright88]

I read through this entire thread and I'm still lost. To clarify, I'm not a part of the GG family but I'm quite intrigued. I do have some questions though.. What is UFS and how does it work? Is the Odysseus a tank system that uses a regular atomizer as the heating component? I'm so lost...

Odysseus is a rebuildable atomizer/tank system that can be used also as an atomizer tank or Ce2 tank. It can be used in multiple modes rebuildable atomizer in drip mode, small tank mode, large tank mode, or it can be used as a tank system for atomizers or ce2 cartomizers. The rebuildable atomizer can also be used in the UFS.

It looks like at launch it will be 510 native although Imeo has mentioned it is likely eventually some kind of modified base may be sold that will thread into the collector tank of a GGTS so adapters will not be required and draw controll can still be used.

UFS is a GGTS tank system that uses stoe bought atomizers or cartomizers. It is Native to the GGTS only but there has been an adapter made to allow it to be used on 510 devices.

 

[Dalton63841]

TL;DR

Great big bag of awesome. Don't think, just buy. You'll figure it out once it's in your hands.

Odysseus is a rebuildable atomizer/tank system that can be used also as an atomizer tank or Ce2 tank. It can be used in multiple modes rebuildable atomizer in drip mode, small tank mode, large tank mode, or it can be used as a tank system for atomizers or ce2 cartomizers. The rebuildable atomizer can also be used in the UFS.

It looks like at launch it will be 510 native although Imeo has mentioned it is likely eventually some kind of modified base may be sold that will thread into the collector tank of a GGTS so adapters will not be required and draw controll can still be used.

UFS is a GGTS tank system that uses stoe bought atomizers or cartomizers. It is Native to the GGTS only but there has been an adapter made to allow it to be used on 510 devices.

 

[krnxguhj33]

I want one. Now.

 

[Digitaltitan]

I know this might be akin to blasphemy here, BUT, one of the lucky people that have an Odysseus Prototype or maybe The GG himself.

I ask this, i would like to see what it looks like atop a provari.
Im a VV goon and until theres a GGVV i dont see the point

But all GG attys have had me clutching my wallet ready to spring.

 

[fright88]

I know this might be akin to blasphemy here, BUT, one of the lucky people that have an Odysseus Prototype or maybe The GG himself.

I ask this, i would like to see what it looks like atop a provari.
Im a VV goon and until theres a GGVV i dont see the point

But all GG attys have had me clutching my wallet ready to spring.

Imeo is the only person with an Odysseus at the moment and I am pretty sure he doesn't have a Provari. Since Imeo decided to send the 6 lucky "beta testers" actual production models I don't think they will be sent out before the regular shippment since the shippment is based on when all the parts will be ready and not any specific set date. However I am sure Imeo will correct me if I am wrong

 

[Digitaltitan]

okay ill look again for the OD on the Odysseus, i dont care about height i just hope it wont look silly on my provari

 

[Vaporologist]

okay ill look again for the OD on the Odysseus, i dont care about height i just hope it wont look silly on my provari

GGTS and ProVari are about the same OD... I think it will look good on the ProVari.

 

[fright88]

okay ill look again for the OD on the Odysseus, i dont care about height i just hope it wont look silly on my provari

According to this post
http://www.e-cigarette-forum.com/fo...al-post4572133.html?highlight=UFS#post4572133
the OD of the Ody is 23mm 1mm narrower then UFS so if you can find a picture of a UFS on a provari it will look similar although there wouldn't be a collector tank so the overall length should be shorter I think

 

[silentt]

I don't know if this has been posted before but what is this? if this is the wrong place to post I'm sorry but repairable atomizer in the UFS. The atomizer part isn't GG but the UFS is..

REVIEW - TUTORIAL OF THE PATRIOT UFS ATOMISER FOR ELECTRONIC CIGARETTES - YouTube


Looks like a very simple repairable atomizer just for the UFS. They are in Russia though.

 

[fright88]

Ah ha

Image taken from this post
http://www.e-cigarette-forum.com/forum/gg/198738-ufs-510-a-3.html

And another Courtesy of Silentt

 

[Vaporologist]

okay ill look again for the OD on the Odysseus, i dont care about height i just hope it wont look silly on my provari

 

[fright88]

I know this might be akin to blasphemy here, BUT, one of the lucky people that have an Odysseus Prototype or maybe The GG himself.

I ask this, i would like to see what it looks like atop a provari.
Im a VV goon and until theres a GGVV i dont see the point

But all GG attys have had me clutching my wallet ready to spring.

BTW Imeo is working hard on a VV addon for the GGTS and Evolv is putting out their Kick (Variable Wattage up to 10 watts at least) so the time for a GGTS may be soon

 

[ChaosAffect]

I will provide Odysseus/Provari pr0n when I get mine.

 

[Digitaltitan]

I will have my own by then, provari Odysseus orgy