Odysseus official
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
-
- Tags
- halo madvapes provari revolution
- Status
That is correct. There are a couple tricks to it. One is you have to be carefull because the res wire becomes a little brittle and it can be tricky if you don't leave enough wire to work with.
Hi Yeti, yes, like that, just unwrap carefully and use on a new wick. In my experience sometimes the coil just breaks when wrapping to the new wick, it must be due the use (getting hot and cold, hot and cold), I know after some use, the coil electrical / mechanical properties could change, increasing the resistance for example. But I have re-used many coils
Or you could use the method of making a coil and install the wick on top of it (http://www.e-cigarette-forum.com/forum/gg/218019-vv-ggts-ftw-14.html#post4937446), it allows an easy way to change the wick without unwrapping the coil.
So you would twist the wires together "as usual", winding the one end around the stem under the ceramic, then before putting the rest of the Ody pieces together, lay the wick on top of the wire?
Actually, I guess before that you would need to wrap the wire around, say a paper clip?
3v and it still satisfies you Stefano? I am very glad to hear that. As for your video....... its epic!!
Imeo
I created a dual-coil setup and put 0.9ohm 3.7V battery. He retired a few times and it was deadly. When I put a 3v battery, vaping is a strong flavor and easy to feed. As I said, it's good for a while, but not for the whole day and always. 1.5 ohm at 3.7V is my choice!
This is my first edited video, thank BP for the intro
I created a dual-coil setup and put 0.9ohm 3.7V battery. He retired a few times and it was deadly. When I put a 3v battery, vaping is a strong flavor and easy to feed. As I said, it's good for a while, but not for the whole day and always. 1.5 ohm at 3.7V is my choice!
This is my first edited video, thank BP for the intro
I noticed right away that my voltage preference with the Odysseus was lower for the same ohm setup with the Iatty....don't know why, but it produces more vapor and flavor at lower settings (which is great). I've checked it over and over again and it's not my imagination...just does. Anyone else have the same experience?
I'm running a 3.5 ohm coil now and have it dialed in on the VV mod @ 4.4v
I had to go up to 3.4 ohms normally 3 ohm cartons in ufs at 6v and I had to drop my mic from 18 to 12
I've never owned an iAtty but have attempted many LR configurations with different atties in the past and I could never find real satisfaction at 3.7V with 1.5 ohm and that's why always preferred HV vaping. Since I got my ODY, I'm getting an unbelievable vaping experience to the point that I haven't even been tempted to try it at HV. I'm currently vaping a 1.7 ohm coil at 3.7V and just couldn't be happier. You are right and I agree, there is definitely something about it that makes it perform better. I don't know what it is...
I have been thinking about that, and I think is due the space in the "cobustion chamber" on the Odysseus the space is smaller than the one on the iAtty (the space inside the cone is bigger), so maybe the result is that on the Odysseus that space get filled with vapor faster, generating more and more dense vapor.
no these are 1x1mm, there fine to use but i just want to try 2x1mm (1mm dia) because the way i make the wire (with hooks)
the 1x1 are fine to use without hooking the ends but by hooking them up then crimping the joint exactly makes for a super secure connection, the 2x1 will just allow more room for error.
i only use snipe pliers to crimp also.
Really and the smile and his eyes after every hit reminds me of the good old days 
Stefano, you crack me up! I like.
This is my first edited video, thank BP for the intro
Haha - no problem. I also enjoyed watching the facial expressions as you puff away. very fun.
I'm still practicing, to prep for a video of my own, and playing around with different R wires. My weak spot at the moment is wick - I've been building so many, trying to get it down, that I'm almost out of wick, and no word yet on when Bruce will have more (hopefully soon!!!!)
I've got some extra if you get in a bind.....let me know and I'll drop some in an envelope
Hey b, will have more wick from Imeo when he ships the Ody parts.
I made a dual coil with Nichrome from Imeo and my silver NR wire. First one came out at 1.6 ohm. 6 volts and Wow! Awesome vapor!
I love this thing!
I made a dual coil with Nichrome from Imeo and my silver NR wire. First one came out at 1.6 ohm. 6 volts and Wow! Awesome vapor!
I love this thing!
I second that question, missed the preorder at COV picked up an ody on ecf and don't wana miss the exta parts
One of my 2012 New Year Resolution is to be all year with my three GG devices SS GGTS+UFS, GGTB+Iatty and Ody in my hand. So I bought first Ody yesterday for my husband, but I will need second for myself... as soon I will break my husband's one. Lol )))
Thank you Tim!!! Imeo Thank You!!!
Thank you Tim!!!
Imeo Thank You!!! I thank you too my dear IlovemyGG. Please give my kind regards to your husband
Imeo, will you be making a steel section as an option to replace the clear acrylic section?
- Status
