Odysseus official
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
-
- Tags
- halo madvapes provari revolution
- Status
Hey no problem Oddy.
I have a few small pliers from a jewelry making kit I have, and if those don't work, I'm certain the hubby has something.
Just sitting here thinking about all of this Odysseus experience. This device has made it possible to please darn near anyone. Whether you're a fire-breather and want the .9 ohm coil or if you're a cloud-breather like myself, enjoying it at 2.6ohm, it does it all.
Since I don;t get out alot with my health, I think probably too much. That said, I would love to see what this industry will loo like 25 years from now. It would be nice to peer into the future and see what evolves from the pioneer era as we are in.
One thing is for certain. If you think cars, you think of Henry Ford. If you think electrical lighting, you think Thomas Edison. In said future, I feel sure that when one thinks vaping, they will think Imeo. In my mind, with all that he has brought to this industry, that's the way it should be.
Since I don;t get out alot with my health, I think probably too much. That said, I would love to see what this industry will loo like 25 years from now. It would be nice to peer into the future and see what evolves from the pioneer era as we are in.
One thing is for certain. If you think cars, you think of Henry Ford. If you think electrical lighting, you think Thomas Edison. In said future, I feel sure that when one thinks vaping, they will think Imeo. In my mind, with all that he has brought to this industry, that's the way it should be.
Since I've never put my hands on the UFS, I'm not sure what I was missing out.. But glad to be part of the first batch of the Ody-owner! I hope there is a way to convert my Ody to UFS with some parts, especially the clear window that shows how my juice I have left since Ody is a big juice-gulper for all I know...
Big mode of UFS includes a window but the upgrade kit does include Ody in UFS but also requires a UFS extension piece.
Sorry but I'm a bit confused.. Since I have an Ody already, and planning on getting the rest of the Ody kit, what else I need to get besides the window for it to be a "Ody inside the UFS"?
However big mode for Ody has a clear window so if they is all you want just the upgrade kid should do it for you
Thanks.. I think I'm in the right page now.. I guess what I could've done is to go and check the wiki.. But it's always nice to hear from friendly-experts here in our sub-forum, even if you have a non-sense question like mine..
yay! I just got my ody! I love it! It's a vapor machine! So much vap! But I cracked the ceramic
Couldnt get the ceramic out of the metal piece as it was really tight. I taste one ody with the soapy taste, so i went to torch mine over the stove with it still being in the metal piece.
Note: ceramic looked perfectly fine in the metal piece. After torching 3 times for about 10secs, each time I took it off the flames, I could see vapor and smell the same soapy smell i tasted in my friend's ody (he built it straight from the start with out any cleaning).
Then i realised that the ceramic has cracked in 2 places. One corner at the bottom end at each sides. I still managed to put it all together, being careful that the wires dont touch the internal metal where the ceramic used to cover.
I got a very very slight soapy taste, but is gone after 10vaps. My eliquid tastes a little different from a 510 or dct 1.5ohm carto. It's a diy red bull menthol. On the Ody, i taste the menthol much stronger and less red bull, previously the menthol was just a hint. Will need to re-calibrate my eliquid formulas specifically for the Ody to my preferences, I prefer something sweet.
Here's a photo of my first diy coil, 1.7ohm on my multimeter. And another on the broken part on one side (same on the other)
Couldnt get the ceramic out of the metal piece as it was really tight. I taste one ody with the soapy taste, so i went to torch mine over the stove with it still being in the metal piece.
Note: ceramic looked perfectly fine in the metal piece. After torching 3 times for about 10secs, each time I took it off the flames, I could see vapor and smell the same soapy smell i tasted in my friend's ody (he built it straight from the start with out any cleaning).
Then i realised that the ceramic has cracked in 2 places. One corner at the bottom end at each sides. I still managed to put it all together, being careful that the wires dont touch the internal metal where the ceramic used to cover.
I got a very very slight soapy taste, but is gone after 10vaps. My eliquid tastes a little different from a 510 or dct 1.5ohm carto. It's a diy red bull menthol. On the Ody, i taste the menthol much stronger and less red bull, previously the menthol was just a hint. Will need to re-calibrate my eliquid formulas specifically for the Ody to my preferences, I prefer something sweet.
Here's a photo of my first diy coil, 1.7ohm on my multimeter. And another on the broken part on one side (same on the other)
You gave me a very big compliment Steve.
I would also like to see the future of e-cigs but I am sure that after 25 years I will sit on the same chair making videos and trying to show you whats new on the GG line.
I would also like to see the future of e-cigs but I am sure that after 25 years I will sit on the same chair making videos and trying to show you whats new on the GG line.
Just sitting here thinking about all of this Odysseus experience. This device has made it possible to please darn near anyone. Whether you're a fire-breather and want the .9 ohm coil or if you're a cloud-breather like myself, enjoying it at 2.6ohm, it does it all.
Since I don;t get out alot with my health, I think probably too much. That said, I would love to see what this industry will loo like 25 years from now. It would be nice to peer into the future and see what evolves from the pioneer era as we are in.
One thing is for certain. If you think cars, you think of Henry Ford. If you think electrical lighting, you think Thomas Edison. In said future, I feel sure that when one thinks vaping, they will think Imeo. In my mind, with all that he has brought to this industry, that's the way it should be.
New ceramics will come very soon, no worries bog
yay! I just got my ody! I love it! It's a vapor machine! So much vap! But I cracked the ceramic
Couldnt get the ceramic out of the metal piece as it was really tight. I taste one ody with the soapy taste, so i went to torch mine over the stove with it still being in the metal piece.
Note: ceramic looked perfectly fine in the metal piece. After torching 3 times for about 10secs, each time I took it off the flames, I could see vapor and smell the same soapy smell i tasted in my friend's ody (he built it straight from the start with out any cleaning).
Then i realised that the ceramic has cracked in 2 places. One corner at the bottom end at each sides. I still managed to put it all together, being careful that the wires dont touch the internal metal where the ceramic used to cover.
I got a very very slight soapy taste, but is gone after 10vaps. My eliquid tastes a little different from a 510 or dct 1.5ohm carto. It's a diy red bull menthol. On the Ody, i taste the menthol much stronger and less red bull, previously the menthol was just a hint. Will need to re-calibrate my eliquid formulas specifically for the Ody to my preferences, I prefer something sweet.
Here's a photo of my first diy coil, 1.7ohm on my multimeter. And another on the broken part on one side (same on the other)
View attachment 73588
View attachment 73589
I'm this crazy Greek steam them.
I did this test to see the strength of Odysseus.
I can say I did very well and not hurt anything.
I did this test to see the strength of Odysseus.
I can say I did very well and not hurt anything.
Imeo, will you sell the odysseus cup, where the ceramic goes in, as a spare part? So you can make an ody in small or big mode and one in drip mode with only one ody kit and one upgrade kit?
edit: nice video btw. lol
edit: nice video btw. lol
Last edited:
- Status
