Odysseus official

[Kurti]

The V2 mouthpiece is 42mm long, and V1 mouthpiece is 37mm long.

So in my opinion, the 30mm clear tank fits perfectly with V2.
For the V1 i think the 27mm tank is the better option.

@Rene.one: The V2 ceramic does not fit in the V1 ceramic housing.
You have to change the complete rebuildable part.

 

[subver]

Does anyone know the diameter of the holes/slots in the ceramic on Odysseus v2? The holes/slots that the wick sits in.
I might try using a pyrex/fused quartz tube like I'm seeing some people do, and I'd like the glass to be perfectly snug.
Thanks!

edit: oh, and the width of the ceramic (inside) from slot to slot - thanks!!

 

[Aron Gatt]

Does anyone know the diameter of the holes/slots in the ceramic on Odysseus v2? The holes/slots that the wick sits in.
I might try using a pyrex/fused quartz tube like I'm seeing some people do, and I'd like the glass to be perfectly snug.
Thanks!

edit: oh, and the width of the ceramic from slot to slot - thanks!!

Try GG wiki

 

[kwalka]

It looks like 6 mm, but I have a coil in there and I'm using a ruler. Batts are dead in the micrometer

 

[subver]

Try GG wiki

Hmm, can't seem to find any detailed measurements with the ceramic

 

[justinred]

Getting a hard time imagining where the pyrex tube would go. So it would sit on top of the ceramic?

 

[subver]

I would basically want these specs:

so it would just barely sit on the ceramic (maybe inside diameter + 1-2mm?).. I guess it wouldnt even have to sit on it, but I would like to have it nice and snug
Just a thought, it might not even work out

 

[Aron Gatt]

I would basically want these specs:

so it would just barely sit on the ceramic (maybe inside diameter + 1-2mm?).. I guess it wouldnt even have to sit on it, but I would like to have it nice and snug
Just a thought, it might not even work out

Oddy use a 3mm wick and that's the v1

 

[Poppa D]

Get a diamond dremel bit and ream it. I got some pyrex tubing to but I havent figured out how to cut it yet.

 

[kwalka]

Get a diamond dremel bit and ream it. I got some pyrex tubing to but I havent figured out how to cut it yet.

This thread will help you out... A bread board with grooves and a file to score allegedly does it nicely.

 

[subver]

oh woops, yeah that's the v1. So 3mm for v2, that's perfect.

And as far as cutting goes, you can file it very lightly and then snap it... I know for fused quartz you need to anneal it after cutting, not sure about pyrex, that might be only after you've melted it

 

[kwalka]

Go back 1 post I linked the thread for doing that.

 

[subver]

Ah nice.
Yeah I definitely want to try the glass on the Ody... did you see the thread where someone made a coil INSIDE the glass? Not sure how it was wicking, but it's interesting!

 

[Aron Gatt]

Ah nice.
Yeah I definitely want to try the glass on the Ody... did you see the thread where someone made a coil INSIDE the glass? Not sure how it was wicking, but it's interesting!

Scubaden did it right? ... I saw it on you tube ...would be interested to see how you did it on oddy

 

[subver]

Scubaden did it right? ... I saw it on you tube ...would be interested to see how you did it on oddy

I just saw this thread about it - very interesting!

 

[Aron Gatt]

I just saw this thread about it - very interesting!

Is saw one reversed .. Meaning a mesh inside the paired tube and a coil on the outside of the Pyrex ...works great but get to shoot liquid like an AK47

 

[subver]

Yeah that seems to be the more common one (coil on the outside of the glass), a lot of people seem to be getting good results! Not sure how worth it it would be, though.

 

[*ASH*]

That So so Helpful really .

 

[deathofelysium]

when will the oddy be released again?

 

[imeothanasis]

Ithaka will replace Ody deathofel and preorders for her starts tomorow and they will last 2-3 days

when will the oddy be released again?