Also, you said you tried cleaning it... how did you clean it? What about your draw speed?
- Status
I tried running it at a higher voltage. Normally I run anywhere from 4.9 - 5.3 on most of my juices on other devices, but this juice just doesn't seem to like going higher than 4.0-4.1. Weird really, because it doesn't give me the "kick" and TH that I'm looking for, but the taste of this juice at 4.0 is just ridiculous.
Everclear. Just let it soak for about an hour. That's how I've been cleaning all my other stuff and it has worked fine. Hanna's video said alcohol or vodka or whatever was fine, so I went for it. I may try using my 99% isopropyl this evening, but I don't know if double soaking an atomizer in this short amount of time is good.
I would stay away from iso, I forget why, but was told that I am better off with everclear. I use everclear also. I have had my share of problems with the .357s, but don't worry. Talk to Hanna and he will take care of you. They can be a bit finnicky sometimes, but are generally super consistent and give the best vape, for me.
Now that I'm thinking about it, maybe after 3 days you coil has broken in a bit, and now 4v isn't producing the vapor/flavor you want. Like I mentioned, I run mine at about 11 watts, maybe try upping the voltage?
What juice are you using? Is it dark? What is the MG? I make my own juices and mine are always clear and dark juices can gunk atomizers up pretty bad. If you are doing an everclear bath though, it should be good if it wasn't done too late. Can you read the Ohm's again to see what it is reading now?
I vape gooey butter cake, that's my ADV. It's kinda dark, yeah. 24mg nic.
I gave my Provari an iso bath a few hours ago, so I'm letting it dry out. First time I've done it so don't know how long is necessary to dry, but I'm being careful. I'll stick the 357 back on there in a little while and see what ohms I'm getting. But I did check it right before I stopped using it and it was right on 2.5 ohms.
The coil does look dark though, maybe it's burnt? I know I wasn't running the voltage too high and I was vaping just like Hanna said it was made for, so if it is burnt or something, I don't know how I did it.
I gave my Provari an iso bath a few hours ago, so I'm letting it dry out. First time I've done it so don't know how long is necessary to dry, but I'm being careful. I'll stick the 357 back on there in a little while and see what ohms I'm getting. But I did check it right before I stopped using it and it was right on 2.5 ohms.
The coil does look dark though, maybe it's burnt? I know I wasn't running the voltage too high and I was vaping just like Hanna said it was made for, so if it is burnt or something, I don't know how I did it.
Yes, I'll give it a shot soon. It seemed like right after the flavor got to be the best I've tasted since I began vaping, it crapped out on me and left me in dispair. lol. Stressful day at work to top it off.
Did you actually give the "provari" a bath? or was this a typo?
Ok I am going to ask. I have done way too much surfing and am sorry if this has been answered already and is a duplicate question. I am obsessed with the HH.357 that's a proven fact if a person saw my collection. lol. I know what settings I use for each ohm. However, what are the real suggested voltage settings for each ohm? 1.5 - 3.0. I am simply making myself a chart so I don't have to think about it. Again, sorry if this was already discussed - I just could not find a solid answer to this. Thank you! 
H Bomb (Hanna) goes high too....
by the "real suggested voltage" ... is lower. i.e. 1.5 Ohm - 3.3 to 3.5v, which btw, does work for some of my HH357 1.5's. Also sometimes when new, one week it works and then it takes more v.
btw, i am still THE atty killer.... one to 2 weeks and that's with 4-5 different pv's and attys going every day ADV.
Ok I am going to ask. I have done way too much surfing and am sorry if this has been answered already and is a duplicate question. I am obsessed with the HH.357 that's a proven fact if a person saw my collection. lol. I know what settings I use for each ohm. However, what are the real suggested voltage settings for each ohm? 1.5 - 3.0. I am simply making myself a chart so I don't have to think about it. Again, sorry if this was already discussed - I just could not find a solid answer to this. Thank you!
by the "real suggested voltage" ... is lower. i.e. 1.5 Ohm - 3.3 to 3.5v, which btw, does work for some of my HH357 1.5's. Also sometimes when new, one week it works and then it takes more v.
btw, i am still THE atty killer.... one to 2 weeks and that's with 4-5 different pv's and attys going every day ADV.
Ok now that I've had some free time, I've been trying to find a way to email Hanna, but can't find anywhere that has his email address. Anybody know it?
If anyone wants a good Wattage/Voltage excel sheet. I created one at work. You can send me a PM with your email and I will send it to you. It was kind of designed around the Provari as the voltages go from 2.9-6. I also have a specific section for 357's and Genesis style atty's. It is in Microsoft Excel 97-2003 Worksheet form, so any office and Open source office should be able to open it.
- Status
Similar threads
- Locked
