Official DiscountVapers.com Thread

[gormly]

DiscountVapers.com - Pure Flavorings Coming soon - need suggestions please.

I am branching out into flavorings shortly. I have a solid contact and good relationship with a major flavoring company using ingredients that are approved by the FDA for usage in flavors. I have used some of them in my liquids, along with TPA, LorAnn and Capellas among others.

I want to expand my offerings to continue to allow DIY'ers to save money.
I am fairly certain I can bring many flavors to market at up to 25% less (or in some cases more) than you are paying now and in smaller amounts.

What I need to know is what I should carry. At this time it isn't financially conceivable to carry hundreds of flavors (I don't want to take investment money away from Go-go products) so I am looking for a "top 20" or so to get started.

If you have a set of flavors you purchase on a regular basis please list them here, PM me or email me so I can get an idea of what I should be purchasing. I know the flavoring market is huge and this will probably be a small sample but it's a start.

I can buy in bulk and resell it to you all for less. The flavors will be from a variety of sources, my "secret" company LOL, TPA and on a more limited basis Capella and LorAnn. I have noticed that certain flavors from one company can be wildly different than another. I am going to do my best to stock only "true to" flavors, mostly clear if possible.

Plus I will start offering my mixes for sale also, meaning you could buy "pure" lemonade or French Toast (it's not the stuff you can get from TPA or Capella) and add your own nic, PG and VG.

I also plan on starting a recipe section and a calculator of sorts where you enter what you have and out pops what you can make I haven't seen this yet anywhere, so it should be unique.

All I need is a few hundred recipes and I can start coding it up. (so send them to me please)
Note, I won't sell any of your receipes unless they are basics and conflict with my own

Thanks!
-Eric

 

[Survivors Mom]

Also waiting for the Go-Go to 510 adapters.

I just don't seem to get the best flavor from the Go-Go cartos that I do others but I love the battery! Kinda wonder if the clear Go-Go cartos would serve me better than the regular ones. Maybe I'm just weird because it seems everyone loves the cartos with their Go-Go but I get an off flavor (and have from all of them) that I don't get with others. I'm hoping the adapter will make it so I can enjoy my Go-Go more.

I love your new storefront! Haven't visited since it was Go-GoUSA.

 

[Briachas]

I buy LorAnn's Bubble Gum and Watermelon constantly. If you could come up with a good Snickerdoodle it would go over really well.

 

[madmach]

Eric the two main all day for me is a Topical Punch and Fruit Punch that have been the main that i started to use in late jan of this year on a 510 than on to the go-go in march of this year.But your Italian Ice Watermelon kicks .... .

 

[mohawkx]

FYI: I'll be doing a review and a How TO Rebuild the New GoGO Dual Coil Cartomizers in a new thread shortly as soon as I find my camera.
First off, the GGDCC's hit exceptionally well and is an exceptional product for the GOGo. Great job bringing these to market, Eric.

Yes, you can disassemble them completely, clean the filler AND(this is important) DRY BURN THE DUAL COILS!!!! You can reassemble them with little effort and they are essentially factory new, and good to go. I've done one but I didn't have a camera. As soon as I find my camera and another one gets tight on the draw, I'll do a picture tutorial of the entire process.

Oh, these do crack easily if any torque is applied to them like dropping them and they land on the carto at an angle. But the fix is very easy. Just gently pull the clear plastic tube off the base while it's screwed on to the battery. Turn it around and reinsert it over the filler and on the base with the cracked end at the lip end. Works like a charm.

 

[GoodDog]

I'm a chocoholic so anything chocolate would be my request. I also vape cake and cookie types... bakery flavors. I don't do much fruit unless it's mixed with a bakery flavor.

 

[jacquelyn]

I LOVE bakery flavors.... Cake batter or icing flavors. Pretty much any bakery flavor I am loving

 

[gormly]

Also waiting for the Go-Go to 510 adapters.

I just don't seem to get the best flavor from the Go-Go cartos that I do others but I love the battery! Kinda wonder if the clear Go-Go cartos would serve me better than the regular ones. Maybe I'm just weird because it seems everyone loves the cartos with their Go-Go but I get an off flavor (and have from all of them) that I don't get with others. I'm hoping the adapter will make it so I can enjoy my Go-Go more.

I love your new storefront! Haven't visited since it was Go-GoUSA.

everyones preferences are different for sure, so don't think too hard on it. It could be the Go-go carto is just not for you.
That said... The dual coil is prety amazing as far as flavor and TH, it's like another level for sure.

I suggest if you do like the battery you get one of the dual coils to try it out, keep it wet and I am positive you'll get the flavor you're looking for. The adapters will be here... I am staring out my window waiting for the USPS man LOL, too bad he wont be comin back around until Monday

 

[gormly]

FYI: I'll be doing a review and a How TO Rebuild the New GoGO Dual Coil Cartomizers in a new thread shortly as soon as I find my camera.
First off, the GGDCC's hit exceptionally well and is an exceptional product for the GOGo. Great job bringing these to market, Eric.

Yes, you can disassemble them completely, clean the filler AND(this is important) DRY BURN THE DUAL COILS!!!! You can reassemble them with little effort and they are essentially factory new, and good to go. I've done one but I didn't have a camera. As soon as I find my camera and another one gets tight on the draw, I'll do a picture tutorial of the entire process.

Oh, these do crack easily if any torque is applied to them like dropping them and they land on the carto at an angle. But the fix is very easy. Just gently pull the clear plastic tube off the base while it's screwed on to the battery. Turn it around and reinsert it over the filler and on the base with the cracked end at the lip end. Works like a charm.

MY HERO!

Yea! This will be pretty cool indeed!
What an awesome tip about flipping it around!

I am so glad this is possible, they are a bit pricey so if we can get them to last a good while, they are totally worth the extra (in my opinion)

 

[Survivors Mom]

everyones preferences are different for sure, so don't think too hard on it. It could be the Go-go carto is just not for you.
That said... The dual coil is prety amazing as far as flavor and TH, it's like another level for sure.

I suggest if you do like the battery you get one of the dual coils to try it out, keep it wet and I am positive you'll get the flavor you're looking for. The adapters will be here... I am staring out my window waiting for the USPS man LOL, too bad he wont be comin back around until Monday

Excellent! I'll definitely order some of the dcc's! I'll check the site early next week and see if the adapters are here and get some dcc's when I order adapters.

Thanks!

 

[Briachas]

Hey mohawkx, is the batting the same type as the original Go-Go carto's? Can we use the fluvall material to cut new ones?

 

[mohawkx]

Hey mohawkx, is the batting the same type as the original Go-Go carto's? Can we use the fluvall material to cut new ones?

The filler appears to be the same as the original ones. All I did was a complete disassembly, clean filler, dry burn the coils fresh and reassemble. Just to see if it could be done. It can and should work well for those with tiny fingers , or the right tool. While I was working on it I thought that fluval would be a good replacement for the outer filler wrap when someone wants to say use a thicker juice mix for better capillary action, or wicking as it's commonly called.
The good thing about the carto is that the coil assembly is very stout and can be opened up for removal of the inner filler and then bent back in shape after reinserting the inner fillers. The inner filler is the key to the GGDCC's operation and most likely will have to be replaced for each rebuild. Not a problem. Eric has the inner fill material material and I'll use cleaned up filler from dead gocarts. But I'm getting ahead of myself. PB Busario's video of cleaning the EMDCC,s will give you a pretty good Idea of the process. I've just taken it a couple steps further.

But the short answer is yes, I think Fluval will work nicely in the GGDCC's but I haven't tried it yet.

 

[gormly]

The filler appears to be the same as the original ones. All I did was a complete disassembly, clean filler, dry burn the coils fresh and reassemble. Just to see if it could be done. It can and should work well for those with tiny fingers , or the right tool. While I was working on it I thought that fluval would be a good replacement for the outer filler wrap when someone wants to say use a thicker juice mix for better capillary action, or wicking as it's commonly called.
The good thing about the carto is that the coil assembly is very stout and can be opened up for removal of the inner filler and then bent back in shape after reinserting the inner fillers. The inner filler is the key to the GGDCC's operation and most likely will have to be replaced for each rebuild. Not a problem. Eric has the inner fill material material and I'll use cleaned up filler from dead gocarts. But I'm getting ahead of myself. PB Busario's video of cleaning the EMDCC,s will give you a pretty good Idea of the process. I've just taken it a couple steps further.

But the short answer is yes, I think Fluval will work nicely in the GGDCC's but I haven't tried it yet.

Good thing I stocked up

 

[Briachas]

Eric, thus far the only concerns I have read or experienced has to do with the plastic tube surrounding this magnificent cartomizer. If you can get them to use a better tubing the GGDCC would be beast! Oh and make sure you have the only rights to this thing if possible. You are the one that brought it into the Go-Go Nation. All hale ERIC! Bringer of the magical puffer stick!!!

P.S. I gotta slow down on the mixed drinks....

 

[gormly]

Eric, thus far the only concerns I have read or experienced has to do with the plastic tube surrounding this magnificent cartomizer. If you can get them to use a better tubing the GGDCC would be beast! Oh and make sure you have the only rights to this thing if possible. You are the one that brought it into the Go-Go Nation. All hale ERIC! Bringer of the magical puffer stick!!!

P.S. I gotta slow down on the mixed drinks....

Yea, first run, I kind of expected something wouldn't be perfect

I am not worried about rights, I don't operate like that, if someone can sell them for less (lol), I say let them. I got into this to supply missing products and offer lower prices, if others follow my lead or are dragged to do so, we all win.

 

[wendallb]

I'll go along with the bakery and cookie type flavors..

Looking forward to the GGDCC cleaning photos or video..

WendallB

 

[wendallb]

Because of spammers I have set the registration on the Go-goforum so that I have to approve anyone that joins so if you join please send me a PM with your user name.

Thanks,

WendallB

 

[gormly]

All hale ERIC! Bringer of the magical puffer stick!!!.

I think I am going to rename the GGDC to "Magical Puffer Sticks"

 

[gormly]

What would be the ideal size for flavorings for DIY'ers?
1, 2 or 4 ounces?

Assuming the price is:
3.99, 6.99 and 9.99 respectively
(not set in stone, could go up or down depending on particular flavor)

I've done a little research and I think these prices are lower than any flavor seller, at least any considered quality.
Let me know otherwise.

 

[bidibird]

Just to let everyone know Eric mixed some banana and creme de menthe for me and it was awesome!