Closer to the air hole? So with the squape, the more lower down it is the better?
Last edited:
Official Squape R[eloaded] thread!
- Thread starter brickfollett
- Start date
- th_trl_thread_readers 0
- Status
Closer to the air hole? So with the squape, the more lower down it is the better?
If you're trying to increase throat hit, yes. I'm going for flavor and it seems I get the best flavor lifting the coil just slightly.
Build yours in the hole of the deck.
I have the ehpro r & it's my adv. No issues whatsoever. It only came with the s deck & I ordered the ehpro w & c decks just to compare
I'm considering adding that one as well.
Just to letyou know i read that higher the coil the more throat hit?
Gp Spheroid with microcoil and cotton guide
Trying to get my spheroid more throat hit
I don't have a Sheriod, but if that's true, its the opposite of most. That may be due to the shape.
MMMMM... This coil is delicious! This is my first twisted coil, I went and watched a few tutorials then twisted up a few lengths for practice. It was a lot simpler than I was thinking it would be, but like a lot of coil building all I needed was to believe in myself a little. Finally a use for all this 30ga.
I forgot yesterday to take pics of my build. Sorry, was doing tank maintenence during the Ohio State/Michigan game. And had a new Orchid to build
But, I put the same build today in my clone. This is before doing a little compression on the mod. 6 wraps of twisted 30 guage on 7/64" (2.8mm).
But, I put the same build today in my clone. This is before doing a little compression on the mod. 6 wraps of twisted 30 guage on 7/64" (2.8mm).
Attachments
I forgot yesterday to take pics of my build. Sorry, was doing tank maintenence during the Ohio State/Michigan game. And had a new Orchid to build
But, I put the same build today in my clone. This is before doing a little compression on the mod. 6 wraps of twisted 30 guage on 7/64" (2.8mm).
How is the new orchid btw?
especially compared to the squape r?
Its my first build on it, so its possible my answer will change later
. I did a 0.4 ohm build. Dual 26g coils, 8 wraps each on 2.4mm. Huge amount of vapor, a bit more than the SqR. Flavor seems a little less than SqR. Talk about a juice pig, lol! I need to refill a lot. Its also the v3 so I think it only holds 2.5ml. I'm running it on a mech so about 44W with a fresh battery.Its my first build on it, so its possible my answer will change later
Lol awesome!
So if i was to say which is better, what would you pick? From orchid and squape?
i too wanted the orchid, but production delays for the UK means it keeps getting delayed!
I can imagine with 0.4 ohms its a juice hogger.
Im now confused whether or not to get the kayfun4 or not!
Oh you got some pics of the orchid?
I think I prefer the SqR. The build is certainly a lot quicker, but I do love getting something new to play with. The Orchid is more of a challenge if you get bored easily. Honestly, the Orchid seems to be a kayfun designed for dual coils. My kayfun parts fit. I have the top fill cap I bought for my kayfun on it. I'm going to try my nano quartz kit as well.
Very different prices as well. The Orchid is a Tobeco clone and I only paid $15 for it. So what the heck, right? I figured, why not buy it
. If I didn't like it, I would just give it to someone else. However, its not worth $150 for the authentic, IMO. The SquapeR is innovative and precise. The cloners have issues trying to copy it. And the true ematal coating on the chimneys and decks is something. The Orchid isn't very innovative. Its a kayfun nano with posts like an rda. If it were $50 less for an authentic, then that would be a reasonable price point for what it is.
I think I prefer the SqR. The build is certainly a lot quicker, but I do love getting something new to play with. The Orchid is more of a challenge if you get bored easily. Honestly, the Orchid seems to be a kayfun designed for dual coils. My kayfun parts fit. I have the top fill cap I bought for my kayfun on it. I'm going to try my nano quartz kit as well.
Very different prices as well. The Orchid is a Tobeco clone and I only paid $15 for it. So what the heck, right? I figured, why not buy it
Ahh i see. Well the squape is a masterful build lol
Can't compare the two lol
I thought it was authentic orchid! Ha
But let me know how it goes. My squapeR is out of commission atm due to the threads
miss my beast!Next on the list i might pur-chase is the kayfun4 as i want something new to play with. Double minded though. Due to the price.
No problem. I'm going to run a couple more tanks through, then rewick
I don't have a lot of money to spend on my vape gear. I'm on disability due to chronic pancreatitis. My out of pocket medical expenses are rather extreme. And I care for a slew of animals, most older and special needs, with high vet bills. So I try clones first, and then buy an authentic if I think its worth it. Now there are some nice and inexpensive authentics that have come out recently. The Lemo is awesome and priced lower than some clones. I have a Billow on the way. I expect it to be similar to the Orchid. It was $21 on Black Friday.
The Kayfun4 is pretty innovative. For the price point I would say it appears worth it. And with Svoemesto, you know its well machined and heavy duty. I'm sure it will be nice.
I hope you get your SqR fixed
No problem. I'm going to run a couple more tanks through, then rewick
I don't have a lot of money to spend on my vape gear. I'm on disability due to chronic pancreatitis. My out of pocket medical expenses are rather extreme. And I care for a slew of animals, most older and special needs, with high vet bills. So I try clones first, and then buy an authentic if I think its worth it. Now there are some nice and inexpensive authentics that have come out recently. The Lemo is awesome and priced lower than some clones. I have a Billow on the way. I expect it to be similar to the Orchid. It was $21 on Black Friday.
The Kayfun4 is pretty innovative. For the price point I would say it appears worth it. And with Svoemesto, you know its well machined and heavy duty. I'm sure it will be nice.
I hope you get your SqR fixed
Ahh i see and i also understand. My weekly medical bill is over $120 dollars, so i can share your pain. But you only live once as i see it, so why not spoil your self lol in my case, i think i need to slow down as i just spent £189 on my provari p3.
I see clones are cheap and you can try them rather than buying the real deal and spending , in some case over triple the amount and NOT like them.
Im really on the fence with the kayfun, i got the kayfun lite clown. Have to say i didnt get along with it lol so im bit confused. (due to leaking and refilling and changing coils etc)
Thhe squapeR is just immense. Getting it fixed though is a total other issue as nothing can be done. been to a few place and they say they cant do anything
What do you think i should do? im not spending £60 on the base....
- Status
