On stockpiling after FDA deeming regulations

[Two_Bears]

All vaping supplies will not disappear overnight. juice, tanks and mods won't be illegal and won't be confiscated. It will just get very expensive to vape as we are currently accustomed to and some things will be hard to find (tanks, coils, mods), some will be easy to find (VG/PG, cotton, wire) and some things may become impossible to find (NIC base).

Everyone is not going to be forced to smoke or use only BT vaping products. Just be expectd to pay a lot more if you didn't stock up before Aug.

NO it wont but if online sales are probibited such as in Utah July 1 how the ______ are yoy going to prep later when you either can't buy it or exhorbitabt taxes are levied against all of those tobacco prodycts.

 

[Two_Bears]

Ohhhhh I did read what you said & the 2 post below best say what I was thinking when I asked you why you thought folks would go back to traditional smoking or cigalikes if they don't prep.

If they are addicted to nicotine and don't prep tge nicotine monkey on their back will find a way to satisfy that craving

 

[zoiDman]

OK. One More.

It's the Post-Apocalypse. And your Favorite mod's 510 thread are getting Wobbly. What do you do? What do you Do?

Well, If you had one of these ...

$1.95 510 Heat Dissipation Heat Sink for Atomizers - stainless steel / 22mm diameter at FastTech - Worldwide Free Shipping

... you could screw it onto your Mod and then Never have to screw an Atty onto those Wobbly Mod threads again. Just leave it on your Mod and away you go.

 

[crxess]

Like I responded to Robert

Tell that to the people in the State of Utah, Indiana, etc. where it's happening sooner than that.

By year end this is going to look like a 6 lane highway with hundreds of exits and thousands of signs..........none going where we planned to go.

 

[Two_Bears]

Yep, thus why people should stockpile for you cannot underestimate the greed and corruption of Government.

HEAR HEAR

 

[r055co]

OK. One More.

It's the Post-Apocalypse. And your Favorite mod's 510 thread are getting Wobbly. What do you do? What do you Do?

Well, If you had one of these ...

$1.95 510 Heat Dissipation Heat Sink for Atomizers - stainless steel / 22mm diameter at FastTech - Worldwide Free Shipping

... you could screw it onto your Mod and then Never have to screw an Atty onto those Wobbly Mod threads again. Just leave it on your Mod and away you go.

Or do like I did, buy a 1/2 dozen VT V2 decks, I'm going to pull the trigger on another 1/2 dozen soon

Sent from my Nexus 6 using Tapatalk

 

[r055co]

NO it wont but if online sales are probibited such as in Utah July 1 how the ______ are yoy going to prep later when you either can't buy it or exhorbitabt taxes are levied against all of those tobacco prodycts.

Rossco thinks, no KNOWS there's going to be a pretty substantial underground market and network

Sent from my Nexus 6 using Tapatalk

 

[DancingHeretik]

Or do like I did, buy a 1/2 dozen VT V2 decks, I'm going to pull the trigger on another 1/2 dozen soon

Sent from my Nexus 6 using Tapatalk

I'm sure I should know. But, what are VT V2 decks?

 

[r055co]

I'm sure I should know. But, what are VT V2 decks?

Veritube 510 decks

VT 510-V2 Connector - Self-adjusting Center Pin

Sent from my Nexus 6 using Tapatalk

 

[DancingHeretik]

Thank you.

 

[Mazinny]

NO it wont but if online sales are probibited such as in Utah July 1 how the ______ are yoy going to prep later when you either can't buy it or exhorbitabt taxes are levied against all of those tobacco prodycts.

What happened in Utah ?

 

[Mazinny]

Utah I view a religious based rulz, Indiana as corruption based rulz.
But those are in less than a week.
And such thing will keep on happening for the next 2-3 years.

What happened in Utah?

 

[r055co]

What happened in Utah ?

What happened in Utah?

Utah Smoke Free Association

You know Google is a rather useful tool

Sent from my Nexus 6 using Tapatalk

 

[Two_Bears]

What happened in Utah ?

All internet sales related to tobacco going in of out of Utah will be prohibited as of 7/1/2016.

No cigarettes, cigars, ejuice, etc.

GrimmGreen reported that in his blog last week.

 

[cocacola31173]

Got this in a few days ago and love it! I have been building for a couple of years now and I haven't been able to make coils near as pretty as on this thing! The one I got was a set of 3 different sizes but find that the 2.0 is all I will need. Going to pick up a 5 pack for 8.30. It did come a bit dirty but a quick rinse took care of it.

I think why most people have trouble with them is that you can't push down on the cap when you are turning and you need to take one of the screws out. I have found using the number 1 screw with 28 gauge works the best.

$2.33 Kuro Koiler Wire Coiling Tool - CW-25 at FastTech - Worldwide Free Shipping

 

[Iron Molly]

You sound like me. Putting my eggs all in one basket with KFL+V2s (EHPro). I finally tracked down 2 that came with the Nano kits and snagged them- where did you get yours? I have never used KFLs before, but it seemed to be the consensus for best MTL tank.

I have been a dripper for years, on 510 atties. I decided it was time to move on to RBAs, so I settled on a tank (KFL) and a dripper- Origen V2 (clone). I am a little more hesitant about investing in one dripper brand only for some reason. There are just so many that people have raved about, lol. But it did seem to me Origen was very consistently praised. I'm torn between diversifying (if I don't like one, I might like another) or sticking with one (makes dealing with spare parts much easier). Again, I have never used an RTA. I am going strictly by faith on these things.

Other possible clone RTAs for me: Stumpy (pretty much impossible to find tho), Marquis, Quasar. I worked to narrow that list down. Then there's the Origen v3, but I can only find one clone, through FT.

All this stuff, even though it's all old tech by now, is mind boggingly new to me.

I think you are doing well with the Kayfun clones. I'm primarily a dripper, but I like them very much. Good flavor and great for MTL. For RDAs, my favorite so far, and the one I'm stockpiling is the Derringer (clone from Fasttech). Easy to build (single or dual coil), great flavor, and very adjustable airflow. Spare parts are plentiful and cheap. I've got a box of RDAs I've tried, including the Quasar, and they don't compare. I think the small chamber design does it. Before finding the Derringer, I was a 510 atty dripper myself. Didn't think I'd find anything that I liked better, but now I have no urge to use those 510s at all.

 

[Bonskibon]

I think you are doing well with the Kayfun clones. I'm primarily a dripper, but I like them very much. Good flavor and great for MTL. For RDAs, my favorite so far, and the one I'm stockpiling is the Derringer (clone from Fasttech). Easy to build (single or dual coil), great flavor, and very adjustable airflow. Spare parts are plentiful and cheap. I've got a box of RDAs I've tried, including the Quasar, and they don't compare. I think the small chamber design does it. Before finding the Derringer, I was a 510 atty dripper myself. Didn't think I'd find anything that I liked better, but now I have no urge to use those 510s at all.

I was looking into getting at least one RDA. May I ask which one you got? Your description sounds like something I would like.

 

[Iron Molly]

I was looking into getting at least one RDA. May I ask which one you got? Your description sounds like something I would like.

I have gotten a few different Derringer clones from Fasttech. The one I'm using right now is the original (V1) design: $6.36 Derringer Styled RDA Rebuildable Dripping Atomizer - stainless steel / 22mm diameter at FastTech - Worldwide Free Shipping

I have a V3 on order, it has a different build deck and want to see if I prefer it: $7.91 Derringer V3 Styled RDA Rebuildable Dripping Atomizer - 304 stainless steel / 22mm diameter at FastTech - Worldwide Free Shipping

I do switch out the shorty drip tip for a longer one. I find the short metal drip tip gets too hot. Any 510 drip tip fits on it. I think the one I'm using right now came from an old clearo.

 

[Bonskibon]

I have gotten a few different Derringer clones from Fasttech. The one I'm using right now is the original (V1) design: $6.36 Derringer Styled RDA Rebuildable Dripping Atomizer - stainless steel / 22mm diameter at FastTech - Worldwide Free Shipping

I have a V3 on order, it has a different build deck and want to see if I prefer it: $7.91 Derringer V3 Styled RDA Rebuildable Dripping Atomizer - 304 stainless steel / 22mm diameter at FastTech - Worldwide Free Shipping

I do switch out the shorty drip tip for a longer one. I find the short metal drip tip gets too hot. Any 510 drip tip fits on it. I think the one I'm using right now came from an old clearo.

Thanks so much. Going to look at them and put one in my cart.

EDIT: Going to get the second one you linked. Like the deck better I think.

 

[house mouse]

Or do like I did, buy a 1/2 dozen VT V2 decks, I'm going to pull the trigger on another 1/2 dozen soon

Sent from my Nexus 6 using Tapatalk

Have you got a link to these? Not sure what you're referring to.

Ha! Never mind. I should have just kept reading.