Origen Dripper v2

[alkaiser]

So I just got the Origen Dripper v2 just now in the mail. The thing looks pretty sexy.

Some changes from v1 to v2 are:

• Shorter in height, smaller chamber
• HUGE drip united drip well
• Engravings on the bottom with serial number
• O-rings are now in the top cap instead of the base
• New drip tip is very wide bore straight through. Very nice.

I'll have a chance to build on it when I get home from work, but building wise, looks to be the same.

edit:
Here's an album to some pictures I took
http://imgur.com/a/XX9aR

 

[player one]

Can you post a pic of the height of the V2 vs the V1? Also impressions if the V2 is better . Thanks man.

 

[alkaiser]

i don't have a ruler at the moment, but imagine cutting off a 'step' from the top of v1 and about a mm more.

It looks like it'll perform the same as v1 but with a slight bit more concentrated vapor and a WAY bigger juice well

 

[player one]

I'm on the fence about getting the V2 since the V1 is working really well for me. Also, I'm wondering if the big bore drip tip would affect the flavor in the V2. I always go to the stock drip tip on my V1 because I feel like it gives me a bit more flavor than a wide bore.

 

[ronpaek100]

wide boreeeeeee!

 

[alkaiser]

i personally hated the 1st drip tip, so i've been using an rsm pyrex drip tip. i'll most likely still keep using the rsm tip instead of the new one.

if i end up liking the v2 a lot, i'll probably sell my v1 to recoup most of the costs.

 

[jizzles]

Where'd you get your v2 from? I pre-ordered from ultramist and they said they're shipping them out today. I'm anxious for this as I really like my v1 clone.

 

[alkaiser]

i got mine from vaping craze

 

[suspectK]

I love my v1, and they fixed the two things that bugged me about it.. it seems like it would hold a lot of liquid, but really doesn't hold as much as one would think, and the O-rings on the base grip way too much.. Can you pull cap off with out it being on a mod, easily?

Also, why can't they make it one finish? Doesn't really bother me, but yeah..kinda

 

[alkaiser]

definitely doesn't come off easily.
the trick i found is to 'push it to the side diagonally' instead of twisting it off and it slides off easily

 

[Doge]

Wow, that juice well is insanely huge. Kind of ruins the appeal to me as a dripper since I like to switch flavors so much.

 

[suspectK]

^that's why you have other drippers...

 

[Ben C.]

I got #62 today and concur with all of alkaiser's observations thus far
That said, all I've done is wash it and won't be setting up a coil until tomorrow. One additional observational comparison I can add though is that the walls of the chamber cap are noticeably thinner than those of the V1's. I have 2 V1s to compare with and the walls are definitely thinner and the whole unit is significantly lighter in the hand.

 

[Ben C.]

Just checked with my syringe... the V2's juice well holds exactly 1.1ml with no wick.

That's just the empty well, filled with water so that the surface tension of the water is level with the top of the cutouts in the well without actually spilling on top of that flat sheet of cutout steel. Normally, with the V1's, "full" to me would be filling until there were concave depressions in the surface of the liquid in both wells, and for that level of fullness in the V2, it was exactly 1ml.

Before you ask, I never did the same measurement in the V1's... was too excited with them when I got them and just started coiling wicking and vaping. And I always forget after rebuilding... oh screw it, let me see if one is low on juice now and let's see...

Ok, a V1 holds 0.6ml with no wick... same standard - level with the top of the well without going over. So would realistically fill to 0.5. Not a bad gain! Overall, the V2 appears to have double the juice capacity of the V1.

 

[Paul.K]

I just got mine today (# 039). It is a bit different in size but looking forward to building on it (V2 is on the right). Will have to wait til my new mod gets here before I build on it. Love my V1 so I'm sure it will be awesome!!!!!

 

[eda123]

I really want one but ultra mist is charging $150?!?! That's nuts.

 

[Paul.K]

I got mine from vaping craze and they raised the price. I got V1 from them for 107 but V2 was 120. If you are not dead set on V2 then I'd keep an eye out in the classies for V1.

 

[eda123]

What RDAs have y'all compared these to? I was really lusting for one but rip tripper really bashed it, which he doesn't do a lot. He said the flavor is so so.

 

[Paul.K]

I've had the Partiot, Igo-w, nimbus clone and a few other clones. By far this is my favorite but don't limit yourself. There are others out there that I haven't even heard of that are suppose to be very good. This is next on my want list. The Tobh Atty | Tobh Mods

 

[alkaiser]

What RDAs have y'all compared these to? I was really lusting for one but rip tripper really bashed it, which he doesn't do a lot. He said the flavor is so so.

honestly, i don't know what rip trippers was thinking when he made that review. if you saw the build he had in his origen, it looked like crap. that one of the worst builds i've ever seen in an rda. he also said it's for vertical coils, but horizontal coils are just as easy.

the good thing about the origen is that it is a reduced chamber dripper with airflow control and a large drip well. the reduced chamber will give a concentrated flavor (similar to how the kayfun works), and the airflow will allow you to adjust. smaller the airholes = more flavor. larger airholes = more clouds. i get more flavor out of my origen than any other atomizer i have (kayfun, omega, patriot, igo-w, nimbus).

but definitely don't order from ultramist, they overprice their stuff to hell. i got mine from vaping craze at a more reasonable price. received mine in 2 days as well.