Ok, cool..thats what I've always used (AW) but was curious about these EH and Efest. Ordering a Pila as well.
69 mod, Cobra Atty, 28 GA Kanthal with 5/6 wrap.
Orion V2 roll call
- Thread starter tierrataz
- Start date
- th_trl_thread_readers 0
- Status
Ok, cool..thats what I've always used (AW) but was curious about these EH and Efest. Ordering a Pila as well.
69 mod, Cobra Atty, 28 GA Kanthal with 5/6 wrap.
I just got to say; I bought another boge rat top cap with a 1.5mm air hole, and I have another 1.0mm boge rat top cap. I got to say, whichever caps I'm using, this hybrid is da real deal man!
IMO I think the bliSS has great flavor and vapor similar to the Orion, I cant speak on behalf of the HF because I have never tried it. But people I have talked to have said it has a great flavor.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
I think my switch is finally starting to go. It is acting up intermittently. Sometimes requiring a very hard press. I replaced the coil and the issue continues. I've had a backup switch on standby for some time now.
time to take it apart and see if it leaked. If so, Iso alcohol bath, dry good and try again, good luck!
Yup, that will be first of course! I'll try to salvage anything I can. Haven't had any juice on any of batteries and I can't see any juice at all in the tube or around the switch. So I'm thinking it didn't leak. But we will see tonight!
Emonty, have you had the chance to try a Juggernaut hybrid?
Emonty, have you had the chance to try a Juggernaut hybrid?
everyone seems to have a great set up with no hot spots but for me i have tried to many times to rewick and re-coil and i have only managed to get it right once of all the tries... and that was also up to half a tank and i started to have hotspots again. when i make the coil using the peter k method, it glows evenly and nicely so i'm sure i am doing it right. but once i slot the wick in, it starts to have hotspots at the top and does not go away no matter how i shift it, press it, pull it whatever there is to try... What could be the problem? I have rolled the wick and burn it quite a number of times... am about to give up on it soon 
Reads anywhere from 1.1-1.6 after i subtract 0.8 from my MM.i'm also wasteing so much juice while trying to get hot spot free... out of a 30ml bottle, i went thru half of it and never really got one good vape out of it...
1.1 -1.6 is a big range. It should be stable, try to get around 1.4 ohm for starters without hotspots, breaking it in.
I meant everytime i try to re-coil, i gets a ohm reading between those range. To get at 1.4 ohm using a 30 gauge, how many wraps would it take? And also what does breaking in really mean? And getting it to work without a hotspot is my biggest problem now..the one time i got it to work right ... it was the best flavor, TH . Vapor is good even if there's hotspot but no flavor. Only burnt taste
ok, I understand. 99% of the problems you or others are having is related to oxidizing your wick. Also make sure the top coil is very close to the center post and not strangling the wick. sorry man it can be a pain, but you had victory, sure you will find it again!
don't have the coil bite into the wick, it will mess up the wick and will create shorts...
don't have the coil bite into the wick, it will mess up the wick and will create shorts...
Some people love them, some people hate them. Who knows haha! It's not like its going to destroy my device so I'll probably pick one up for .....s and giggles and do a comparison.
Orion 2.1, 69 Mod with Cobra Atty, 28ga Kanthal, 5/6 wrap.
Breaking in is like marinating it...getting it good and ready...the more you use it, it will begin to build up even more oxidation between the coil and mesh, resulting in even less hotspots, and an all around better vape...that's why some people use the rolling paper method, it's like an instant thick buildup between coil and wick.
Orion 2.1, 69 Mod with Cobra Atty, 28ga Kanthal, 5/6 wrap.
- Status
Similar threads
