Orion V2 roll call

[muddstar]

What's the best way to take this apart, this doesn't go off unless you undo the battery. Switch clicks just doesn't do anything, so I need to screw the battery in and out.

 

[emonty]

What's the best way to take this apart, this doesn't go off unless you undo the battery. Switch clicks just doesn't do anything, so I need to screw the battery in and out.

https://docs.google.com/file/d/0B2imTCP2yWZvXzliQXQwMjlsOG8/edit

 

[the_great]

I sealed my orion...
Sealing my Orion… « pinoyvaper

 

[kellyd]

could someone pm me the link for more info on ordering a orion

thanks

 

[emonty]

could someone pm me the link for more info on ordering a orion

thanks

www.vaporwall.com • Login
go to the last page and add your name to the reserve list.

 

[aziffel]

What's the best way to take this apart, this doesn't go off unless you undo the battery. Switch clicks just doesn't do anything, so I need to screw the battery in and out.

Is your battery inserted with the neg. towards the top?They fire constantly when the battery is pos. to the top.
If you already knew this,just ignore

 

[muddstar]

Batts are in correctly, took it apart and it oring was broken and board soaked with juice. Got it cleaned up and back together, same as before, stays on.. Reckon I'll just set it as a reminder to stay mechanical.

Is your battery inserted with the neg. towards the top?They fire constantly when the battery is pos. to the top.
If you already knew this,just ignore

 

[muddstar]

Darn it, I really like this thing, ok new switch it is.

 

[the ob]

you can clean the entire switch in iso alcohol and use it again. I did this. I sent a pm to help.

 

[muddstar]

Thanks ob, just ordered a new switch a few minutes ago.

 

[tierrataz]

Just in case anyone missed it with the US holiday.

by Nosmoker » Mon Sep 03, 2012 11:10 am
party to start tomorrow
you have 24 hours to response to my email after that I will go on
only part of get my e-mail because I do not have all the switches
I have ordered more units
and I want to devote a part of to be sold as spare

 

[Vapor2112]

Anybody know if these are the right ID to fit the 2.1 by chance?

Stainless LM Tank

 

[Vapor2112]

Did I kill the thread??

 

[emonty]

lol...I guess nobody knows.....

 

[Turbo]

Anybody know if these are the right ID to fit the 2.1 by chance?

Stainless LM Tank

I didn't see any specs like ID/OD on your link. I think the specs for the Orion tank are 20mm OD and 16mm ID.

 

[Vapor2112]

I've got some cracks in mine so I need to figure "something" out pretty quickly, that'd sure be an easy answer if I can just cut it down, put a brushed finish on it if need be, and not worry about what liquid's going in there..

 

[Vapor2112]

Yeah, I didn't see any specs, nor did any search get me an answer..
And yeah, think you're right in that 16mm ID is what we'd need.

I didn't see any specs like ID/OD on your link. I think the specs for the Orion tank are 20mm OD and 16mm ID.

 

[emonty]

I've got some cracks in mine so I need to figure "something" out pretty quickly, that'd sure be an easy answer if I can just cut it down, put a brushed finish on it if need be, and not worry about what liquid's going in there..

I have a spare glass tank for you, one of Terry's, pm me if interested

 

[Vapor2112]

Appreciate the offer bud, let me see if I can get something that will work before I put you out any..

I have found one post saying the following re: that tank..: ".617 measured with cheap calipers" which I have to assume is inches which would convert to just under 15.7mm, seems awfully close...

I have a spare glass tank for you, one of Terry's, pm me if interested

 

[Turbo]

I've got some cracks in mine so I need to figure "something" out pretty quickly, that'd sure be an easy answer if I can just cut it down, put a brushed finish on it if need be, and not worry about what liquid's going in there..

Siam tanks work but need cut down I believe. 'tierrataz' used a metal one earlier in this thread.