If you watched the video in the OP, he said it will ONLY be available from dealers to start.
P3 Provari
- Thread starter tj99959
- Start date
- th_trl_thread_readers 0
- Status
If you watched the video in the OP, he said it will ONLY be available from dealers to start.
Your post said it will be "released" on the Provari site and at dealers for two different prices. Was simply pointing out it won't be "released" on Provape.com to begin with. I'm sure when Provape does offer them direct to consumer, dealers will likely charge more than Provape does, but that's conjecture at this point.
I thought it was quite obvious it will be released through dealers first, given it has been mentioned in several threads and P. Busardo's video. ProVape also stated they will announce the price it will sell at from them before dealers start selling it so there will be no price gouging... So, I believe it will be $259.99 through ProVape and dealers will sell it at $300...
If I get one, I'll wait until they have blems available. I bought my first from my local dealer at full retail. I bought my 2nd one, a blem from Provape directly and darn if I can find any blemish on it.
As to pricing, you could be right, but I hope you are wrong! That would be a pretty hefty price jump from the 2.5.
They spent a lot on the R&D I am sure, and it is not replacing the 2.5 yet. They will also have trouble keeping up with demand if it were to be priced any lower. $259.99 seems quite reasonable considering it has more parts than the 2.5 and a lot more technology... That also prices it less than a full Semovar kit...
I think you're on the low side there but time will tell.
I waited a couple of months for any word on release date from provape. Gave up and went with the VS rDNA30- now after seeing the Busardo preview, I have no regrets.
Could be. Maybe $259.99 once the 2.5 is phased out. Whatever the cost, I am sure it will be worth it...
My blue Provari 2.0 is battle-scarred as all hell. It's been dropped on pavement, down stairs, dropped into puddles, survived juice leaks from crappy toppers, and it's still going strong. Because of all the stuff I've owned (eGos, Vamos, Lavatube 1s and 2s, Lambos, Silver Bullets) the Provari is the ONLY one that's never let me down. It vapes just as good today as it did when I got it two years ago.
I'll be there day one to snag a P3.
I'll be there day one to snag a P3.
Funny that Provape and Innokin both release a 20watt device.... Innokin opted to use the Evolv Dna20 board modified to include buck circuitry..and able to fire 0.5ohm. I'm guessing that provape designed a its own board? Glad to see an OLED in the provari family finally...lol. And I think they removed those god awful screws. I personally think 20 watts is fine for the majority of folks. The Innokin Dna20 Svd2.0 is going to go for $99.00 dollars. I imagine the P3 will sell for $250.00 or so.... After watching Pbusardos provape piece I was thoroughly impressed with their QC measures.... I hope that Provapes new 20watt board is as good as Evolv's Dna20 board? I will be watching both devices over the coming months and hopefully they are both big winners for the vaping community.
SSSSSSSSSSSSSShhhhhhhhhhhhh guys. Stop saying the P3 is going to cost $250+! They haven't priced it yet! We should all be posting: " I wouldn't pay more than the current 2.5, maybe they will price the new mod like the 2.5 and lower the price of the old mod", etc. Don't give them the idea that we are all willing to pay anything, just to get their new device. 
- if you never owned a Provari please stop contributing to this thread because your opinions are based on other subpar devices that you have used to compare to the Provari.
That's like going to a Harley Davidson meet with a skateboard.
Now that's out of the way..
WOW. Finally.
Or is it really or what's going on here!
No more error codes ? Yes please!
Interchangeable tubes with matching threads to mix and match with your previous end caps attachments ?! That's like saying hey I can put my gold coated tatroe extension with my new toy ?
If the p3 comes out I will wait for a couple of months until they release a zombie edition p3 where you have to feed it blood in order for the IQ control to stay healthy. "Joking"
Anyways.
The Provari 2.5 is the best thing a person can have in their vape stash.
How about dna80 users with 80 watts going at .5 ohms? Yeah sure you guys are cool until you realize all the glue just melted inside your internal board and you need to send that back in the shop
your Hana mods might b able to push 100 watts but the plastic housing and all that homemade diy connections will someday fry out on you.
The only gripe about this is I wish provape would go an extra 5 watts for a 25 watt vape at .7 that would be sweet.
But maybe they did studies and realizes that after a certain time the unit gets hot after a certain wattage and you're slowly destroying your mod.
Provape has the money to do those kind of research u kno..
Anyways.
I'm happy w my Provari and when this comes out, I'll probably have $150 saved up for it and by the time I have all of it - there would probably be a splash of cool colors that will be released ..
Sent from my P3 device using IQ Control Voice Recognition Technology
That's like going to a Harley Davidson meet with a skateboard.
Now that's out of the way..
WOW. Finally.
Or is it really or what's going on here!
No more error codes ? Yes please!
Interchangeable tubes with matching threads to mix and match with your previous end caps attachments ?! That's like saying hey I can put my gold coated tatroe extension with my new toy ?
If the p3 comes out I will wait for a couple of months until they release a zombie edition p3 where you have to feed it blood in order for the IQ control to stay healthy. "Joking"
Anyways.
The Provari 2.5 is the best thing a person can have in their vape stash.
How about dna80 users with 80 watts going at .5 ohms? Yeah sure you guys are cool until you realize all the glue just melted inside your internal board and you need to send that back in the shop
your Hana mods might b able to push 100 watts but the plastic housing and all that homemade diy connections will someday fry out on you.
The only gripe about this is I wish provape would go an extra 5 watts for a 25 watt vape at .7 that would be sweet.
But maybe they did studies and realizes that after a certain time the unit gets hot after a certain wattage and you're slowly destroying your mod.
Provape has the money to do those kind of research u kno..
Anyways.
I'm happy w my Provari and when this comes out, I'll probably have $150 saved up for it and by the time I have all of it - there would probably be a splash of cool colors that will be released ..
Sent from my P3 device using IQ Control Voice Recognition Technology
Last edited:
Speaking of low ohms users, u know how fast provape can make a mech mod tube.. All they have to do is create a floating 510 connection and a tube with an end cap and BAM!
Someone over there must have thought of that and I'm guessing the superiors over there declined their suggestions for reasons wiser than we can think of.
Probably safety issues.
Sent from my iPhone using Tapatalk
Someone over there must have thought of that and I'm guessing the superiors over there declined their suggestions for reasons wiser than we can think of.
Probably safety issues.
Sent from my iPhone using Tapatalk
- Status
Similar threads
