P3 Provari

[tj99959]

If they did make a 50-100 watter, I can assure you, it'd be the best one! Hahahahaaa

Spend 90% of my time vaping a ~2.5 ohm coil on a 3.7v battery, ya I really-really need that 50-100 watter

Some day folks will figure out that we all don't have the same needs, and there will never be a mod that is right for everyone. So each of us will have to decide for ourselves if a P3 meets our individual needs, and not worry if it doesn't meet someone elses needs.

20 watts ... 30 watts pft-pft-pft, Hell I don't particularly like 10 watts, and there are plenty of ways to get a great vape below 10 watts.

Bet you loved those Marlboro Reds too >snort<

 

[Asbestos4004]

I like all of it. My provaris rarely see over 4v. There's always either a kayfun or a taifun on top. If I had to dump everything I own and keep 1 set up, it'd be a provari and a kayfun.
That doesn't mean I can't enjoy everything else. I certainly don't "need" to go sub ohm with Mechs and DNA devices....but I WANT to. So I do.

 

[Baditude]

Some day folks will figure out that we all don't have the same needs, and there will never be a mod that is right for everyone. So each of us will have to decide for ourselves if a P3 meets our individual needs, and not worry if it doesn't meet someone elses needs.

20 watts ... 30 watts pft-pft-pft, Hell I don't particularly like 10 watts, and there are plenty of ways to get a great vape below 10 watts.

I know vapers who are still using Volt cigarette-size batteries with pre-filled cartos. They've been perfectly happy with that setup for three years. Amazingly to me, it works for them. Sometimes I ask them will they every get a mod or at least an ego. They usually say, hell no. Those are too big.

Those same Volt cigalikes were what I started out vaping with, and I'll admit that they got me off of cigarettes. But after three weeks use I wanted longer battery life and more juice attachment options. I completely skipped the intermediate eGo's and got a Silver Bullet mechanical mod and a cartotank. A couple of months later I had my first Provari and never looked back.

I still use a Provari with a Kayfun. But I've recently resurrected my little-used Silver Bullet with a rebuildable dripper and vaping a conservative 0.6 ohm dual coil. They all give me a different vape, and I love them all.

 

[imsoenthused]

Bet you loved those Marlboro Reds too >snort<

Unfiltered lucky strikes actually, what's your point? I agree with you actually. That doesn't mean I don't want a high wattage regulated mod with the same build quality as my ProVari, instead of an ugly or flimsy little Chinese box. I actually had put off buying any of the new mods because 1, they're all ugly IMO, and 2 I was waiting to see how the new ProVari would measure up. The answer just happens to be that it won't do anything more, for me personally, than my ProVari already does. That doesn't mean it won't do what it's designed to just as well as the previous ProVaris always have. Some of us were just hoping for all that and more.

 

[Asbestos4004]

Spend 90% of my time vaping a ~2.5 ohm coil on a 3.7v battery, ya I really-really need that 50-100 watter

Some day folks will figure out that we all don't have the same needs, and there will never be a mod that is right for everyone. So each of us will have to decide for ourselves if a P3 meets our individual needs, and not worry if it doesn't meet someone elses needs.

20 watts ... 30 watts pft-pft-pft, Hell I don't particularly like 10 watts, and there are plenty of ways to get a great vape below 10 watts.

Bet you loved those Marlboro Reds too >snort<

I didnt even see the Marlboro reference until now. So, what IS your point?? You're going to judge me on the brand of cigarettes I smoked, too? I'm pretty sure my point was lost on you completely. Please give me some time to try to process the hurt I'm now feeling.
Oh, great picture, by the way. I was pretty happy when I was able to get my ProVari to produce vapor too. Isn't it wonderful? Where's my camera...I need to post a photo of my ProVari producing vapor.....folks will be stunned!

 

[tj99959]

I didnt even see the Marlboro reference until now. So, what IS your point??

Point is: we never all agreed on which brand of cigarettes was best, so why would anyone think we would all agree on which PV is best?!? Or which resistance is best, or which .....................

Many on here remember when it was easy; you used a LR atty on a 3.7v mod, and a SR atty on a 5+v mod because those were the only choices you had.

But then we argued over which was better, a 306, or a 510.

 

[Greatov]

I didnt even see the Marlboro reference until now. So, what IS your point?? You're going to judge me on the brand of cigarettes I smoked, too? I'm pretty sure my point was lost on you completely. Please give me some time to try to process the hurt I'm now feeling.
Oh, great picture, by the way. I was pretty happy when I was able to get my ProVari to produce vapor too. Isn't it wonderful? Where's my camera...I need to post a photo of my ProVari producing vapor.....folks will be stunned!

Dude you are being too harsh and defensive. I like my sub ohm vaping as much as the next guy but this is a great mod for daily use. I'd love to have this at work. I'd even put an aspire nautilus or silo tank on here because of how easy it is to use and refill.

This is going to be a super high quality mod that's incredibly reliable and will be more than powerful enough for 90% of vapers that vape in the way they smoked (for the nicotine, breaks, etc). Not everyone has/makes the time to be constantly rebuilding to reach higher and higher levels of power/vaper/etc. there's nothing wrong with that but this is a high quality mod aimed at an average user demo. I think it looks great and I'm excited to buy one!

 

[Asbestos4004]

I don't think I follow you....read my comments in this thread. Its an awesome device. ProVape makes the best....I own 4 at this point. I'm certainly not knocking it. I've spent most of my time on this thread defending it, so I'm not sure I understand what you're saying.

 

[serenity21899]

So, the ProVari fans are going to buy the new one. The haters are still going to hate, but will have new reasons. So, really, nothing changes.

 

[heinz]

Hey asbestos and the rest of the guys, I might have come off a little bit snobbish earlier stating some things but the reason why I said people who don't own provaris shouldn't even post on this thread is because I've seen a lot of bashers bash on the Provari bc it's a Provari and they automatically go into hater mode.
Everything I mentioned I was honest and in no shape or form did I shove anything down people's mouth but you all seem to think that I'm a Provari fanboy blah blah blah.

Let me guess this straight. If I love a product and I gush over it , no matter if it's a Provari or a car or a food dish, let me gush in peace without you guys being all hostile.
The pattern here seems to be that all Provari owners love their product.
And some guy is gonna come in and say hey f u, that thing sucks.

I think the p3 is a major improvement over the Provari. But some are still dissatisfied.
Let me tell you if I was in a business to satisfy every person I would end up killing myself in the end because u can't impress everyone.


All I mentioned was the specs of the Provari and what it does and why it's so good and automatically I'm a snobbish uneducated fanboy.

As provari owners I'm ashamed you guys would bash each other.
And the topic of this subject is 3.
Not "Provari 3 sucks"
So if you guys are here to say negative things about it then create a separate thread and I'm pretty sure it will be a hot topic.

Before I even started to comment on this thread I've watched phil b video and went to provape forum and researched my facts and I already know that there's going to be people automatically bashing on the Provari bc they don't own the Provari.

So that's why I said what I said but this is a generals discussion anyway so I'm just trying to filter out all the bs negative nonsense and help you guys out in having an educated topic among provape users alike.

No sense talking to sheep when you're a lion, I swear

And oh yeah. All these specs were talking about are not even final.
And people are already getting ...... off at each other over a beta model.
What if Provari 3 was $189
U guys don't know anything and you call me the uneducated one ?
Assuming on a product that's still in production with no actual details on how it's actually going to be,
I'm laughing inside


Sent from my iPhone using Tapatalk

 

[heinz]

If provape really wanted to satisfy the major market they would make a prohookah or epipevaripro

People who want 30 watts and .3 ohm limits , u people are insane.
Which is why the majority of the world hates you vapers.
Real talk.


Sent from my iPhone using Tapatalk

 

[danfinger]

No sense talking to sheep when you're a lion, I swear

Please don't stop. You are really entertaining this sheep/chimp.

(Provari mini owner. Therefore qualified to post in this thread. LOL)

 

[Weizenheimer]

The majority of the world is too busy thinking about how they don't have meat to eat to even know that sub ohm vapers exist.

 

[Asbestos4004]

If provape really wanted to satisfy the major market they would make a prohookah or epipevaripro

People who want 30 watts and .3 ohm limits , u people are insane.
Which is why the majority of the world hates you vapers.
Real talk.


Sent from my iPhone using Tapatalk

you wouldn't , by any chance, be the fella who said there's no glue in a ProVari, are you?

 

[NathanielFT]

Haters [emoji23][emoji23][emoji23] its.an.electronic.cigarette [emoji58]

People saying they don't like the p3 aint saying f you if you like it, they are saying they don't like the p3. The hostility comes in when the people who don't like it can't state their opinion without being bothered by a fanboy about it i.e 'bah you dont like provari you must never have owned one get off of this thread'. Thats what makes them a fanboy, not liking it/wanting it/owning it/etc.

And nobody cares if you don't like people who sub ohm @heinz, you don't speak for the majority of the world, the majority if the world dont know what sub ohming is, infact the majority of vapers probably dont know what sub ohming is - unless you think ECF is the majority of the world??

Just be cool, sit down, have a vape, and relax bro, real talk lool

 

[EuroChris]

I love high end VV/VW tube mods, and up to 20w fits what I usually use.

Only negative things about the P3 is that I wish it was smaller, as it is kind of big. I also don't like the OLED, I prefer two digit LCD.

Price point will be a factor for me, as there are several devices that performs great, has the same wattage and are of the same high quality for under the price of a Provari 2.5.

 

[Ryedan]

So, the ProVari fans are going to buy the new one. The haters are still going to hate, but will have new reasons. So, really, nothing changes.

Change happens slowly, but it does happen. The ProVari wars have calmed down a lot over the last couple of years. Two years ago this thread would probably not have got this far before being closed due to people getting out of hand. Used to be quite entertaining for those of us who just watched and chuckled .

Ahh, the good old days

 

[danfinger]

you wouldn't , by any chance, be the fella who said there's no glue in a ProVari, are you?

he didn't really say there is no glue in a provari:

All the dna30 devices out there do not have the safety features or the board that the Provari have.
90% of those devices use glue inside their devices.
Glue.
Something that 3rd graders use.

Though the above comment does imply that he *thinks* there is no glue used in a provari. Which if you want to be a real pedant (which I wouldn't put past him) would be true. I read somewhere it is an epoxy (same fricken thing in my book)


(I am officially allowed to post in this thread as I own a Provari-mini)

 

[Ryedan]

People who want 30 watts and .3 ohm limits , u people are insane.
Which is why the majority of the world hates you vapers.
Real talk.

LOL, at first I thought you were just young and didn't know any better. This though is just trolling. Thanks for clearing that up

 

[Asbestos4004]

he didn't really say there is no glue in a provari:



Though the above comment does imply that he *thinks* there is no glue used in a provari. Which if you want to be a real pedant (which I wouldn't put past him) would be true. I read somewhere it is an epoxy (same fricken thing in my book)


(I am officially allowed to post in this thread as I own a Provari-mini)

Well, thanks for pointing this out and saving me from hurling a false accusation! It was chambered..... hahahahaa