Penelope V2

[Yaya]

Hey guys. Can't figure out when making coil as imeo's, which wire goes to threaded plastic or O ring via ceramic channel or metal channel. Would appreciate some help. Did I make any sense?

 

[Darkreign]

Wire going through metal channel (negative) goes to threaded plastic and ceramic channel (positive) goes to o-ring.

 

[Aal_]

not paying attention in class, are we?

 

[Aal_]

Since this thread is about Penny, perhaps we should post a picture of her to help us forget that brain-scarring picture of Miley Cyrus. Like this one:

From left to right: Penny single coil, Penny dual coil, Penny single coil cotton, Penny dual coil cotton, Penny microcoil Ekowool, Penny microcoil cotton.

This penney is the best let me tell ya

 

[xtreme101]

They all look like such a good vape ~ I can't decide which coil I want

 

[Yaya]

Thanks Dark. Succinct and precise. I like it.

 

[kad07]

Hi there,
Received P2 at 9 a.m.(when I’m going to work) ; setup P2 at 8 p.m. ( when back at home) ; now vaping from P2 ; work like a charm ; RESPECT IMEO and to all Greek moders ; you're fantastic people ; you give us philosophy , math, geometry , democracy and now you make our life much better with this wonderful vaping devices.
And you have a beautiful country.

Again RESPECT!!

 

[imeothanasis]

Respect to you too Kad. I am so glad that you like your new Penelope

 

[yankeebobo]

Ahh crap. Ceramics are in stock already at e-smoke. I just paid for shipping.
Imeo I hope these ceramics will be around a bit.

 

[CaptSteve]

Hmmmmm any chance we can see Penny when you give her a good wash

Since this thread is about Penny, perhaps we should post a picture of her to help us forget that brain-scarring picture of Miley Cyrus. Like this one:

From left to right: Penny single coil, Penny dual coil, Penny single coil cotton, Penny dual coil cotton, Penny microcoil Ekowool, Penny microcoil cotton.

 

[Ariel_MX]

Hmmmmm any chance we can see Penny when you give her a good wash

 

[Bigwhiterabbitt]

Some times I noticed Diffrent inhale or draw can enhance or reduce flavore,
And sometime subtle change can make better result.

I can only speak for the Ithaka as I did not recived yet my Penelope's.

I get clouds heavy stuff full of flavor from simple 1.5 ohm ribon on silica with no dry hit at all
Full of flavore.

Yet it was not so from the begining and I see it is not so for others,and I know all reply
what going on there game yard.

So For some month I read all post,and try diffrent inhalings and bam it's there.

My thanks again for Scot Bonner (Igetcha69):

When I did start to draw at the same time with hitting the button,
I got dry hits after two draws or so.
And when I try more air and stronger draw it was far dryer (with silica I should add)
Not with cotton.

And yet it was bugging me how Scott produce those fluffy pilows and fatty rings,
With diffrent setups sometime on 2 ohms coils,with never complain on dryness or not
Enough vapore,and using silica!

So I thought about all his reviews and the way he inhale.

What I came up with was that if I hit the button and don't draw immediately,
Just let the coil produce the vapor for a second or two,the inhale slowly, and let
The vapor go allmost by itself it became thicker and full of flavor.
And it happend little differently on diffrent attys.

The Ithaka perform better if did this for 1 or 2 second.
Also the wicking became flawless,juice stream via the silica very good and continually.
So it turn the oposit of what I thought.

It's not the strong draws that produce for me more vapor and better flavor.
Better add it like an old oil lamp let it wick by iteself.
Ya that's more like it.
Forcing the draw make uneven heating of the coil.


It take some little practis to make it work as you want but after that it's big clouds,and full flavore,
And very importent much better wicking,with silica I should add.

That my personal experience I not promise it will work to all,but it work for me and gave better
Result from changing setups.

There I hope it's does make logic and I urge any one to give it a try.
As my Ithaka with simple built and coil perform just great,and I do wish this for all.

Thanks Itshak, I'll try taking it slow. I've just come down with an awfull head cold too so mabyee it's just my tastebuds have died the past day or so..

 

[Itshak]

hot chicken soop with a bit of garlic
And a good sleep may do the wonder then bigwhite.

 

[Bigwhiterabbitt]

Or a hot whiskey Itshak ; )

 

[Gobra]

After 4 day long national transit hmm
I ran 3 consecutive days at the post office to pick it up .. and nothing
-thought it was an error with tracking number-but it was
Last night I worked on a new project until 4 o'clock in the morning today
Today the fourth day I said-I do not wake up early in the morning to go to the post office to get up for nothing..
who do you think came in the early hours of the morning at my door..SHE !!
I set it on and I ran to work..but I forgot to wash it,because of this I could vape of it until now when I am back home again

SHE is beautiful !

laughing at one thing,thinking of those who inhaled directly into the lungs ,with the small piece of the end of the mouthpiece (semi-telescopic piece or the new airflow mp ) what will happen if it is unscrewed to the maximum

 

[Lo zio]

That's interesting Lo. I find it difficult to achieve an airy draw unless I move to a universal drip tip. Course I'm not running it on a provari. But that adjustable is almost closed and I feel I'm sucking a lemon through the mp

Yeah well, of course if you close the mouthpiece you have to suck a lot, but it's not an air control that actually has influence on the air-juice mixture proportions like, say, a carburetor, as happens in Ithaka and particularly in the UFS.
Anyway: I have problems with the semitelescopic part of the mouthpiece.
I tried to replace it with a common drip tip and things got better (less airy, more creamy vapor), then i removed it completely. At present I'm vaping without any tip...
And...wow. I like this. My coil had its break in time and is now performing very well - lots of vapour compared to Penelope V1, very very nice TH, not bad flavour. Now, as strange as it seems, I sense a difference between this and the V1, in the beginning I was disappointed. As it is...cool. I'd dare to say I prefer this to Ithaka for my quiet vaping style (no sub ohm multicoil whatsoever, middle range wattages and so on).
Now of course I should solve my issues with the telescopic mouthpiece, I don't have an explanation. As soon as I mount it I feel too airy a draw, vapour production gets less and flavour really changes. Don't know why.
Somehow I'll manage this, I suppose.
For now I can say that Penelope V2 # 164 stays here, that's a fact. In the worse case scenario I'll vape without tip forever!

 

[Aal_]

Interesting theory regarding the air. I'm assuming that you mean although it is a tight draw it has more air than vapor and that might be due to the design. We will have to study the dynamics to prove this but I don't think anyone else mentioned this problem. So hopefully you let us know what your findings are.

 

[Gobra]

I washed it all is ok now
I have a problem ..
I think I like more than Ithaka but I can not compare them
As I said earlier

Yup it is a mini Ithaka .. can say that
it is a mini Ithaka with other improvements .. can say that
I'll consider it

I think I want one more

as usual impeccable construction and functionality ,I do not think it should be specified

new mp I like and I want one for Ithaka
I do not understand how it works in the video posting the new airflow mp Now I understand and I am delighted

I have great confidence in what builds imeo
thinking..Congratulations I think you got thousands imeo
I tell you Keep it up and you never feel ,, a little strange,,

I have so many ideas gobra and so little time. And when I see my thoughts on other mods I feel a little strange

I want to buy products that come out of your hand ,you find the best way how to upgrade ,update them
it's time to start war ,thinking of loyal customers and not ,,others,,

I expect new products
and if you delay the production and I'm coming to visit you or rather keep my money away for new products

 

[Lo zio]

Interesting theory regarding the air. I'm assuming that you mean although it is a tight draw it has more air than vapor and that might be due to the design. We will have to study the dynamics to prove this but I don't think anyone else mentioned this problem.

Yup!
Of course this is just based on subjective first usage impressions, but the sensations I get from this air control is just of occluding the draw, while I'm still getting a lot of air, just with more effort (sorry guys for my english, I do my best to explain myself).
That said, my observations here are contradictory: if it's the design to allow a lot of air getting sucked, then I should feel the same after removing the semitelescopic tip, but by removing it I get:

- more vapour (a lot more) (better than V1)
- more hit (slightly better than V1, way better than Ithaka)
- a denser vapour (comparable to V1, less than Ithaka)


And this I don't have an explanation for.
I guess it's me doing something wrong with this tip, but I really don't understand it...

We will have to study the dynamics to prove this but I don't think anyone else mentioned this problem. So hopefully you let us know what your findings are.

I'll go on with this coil, it's performing really well!
I have all my other devices on the desk and I'm using only Penny V2 - without tip, and it's nevertheless an outstanding vape. In the future I would be happy to use it at its full potential, including the tip.
It would be nice to hear from somebody using it maybe on JustGG, to understand how it behaves in terms of airiness on a mod with native air control. Or you'll have to wait, sooner or later I'll get a JustGG myself ahahahah.

 

[Gobra]

ahahahah
I tell you buy the JGG THE GOLDEN GREEK MODS :: The GG Devices :: Just GG SS - e-smokeguru