Penelope V2

Status
Not open for further replies.

yankeebobo

Vaping Master
ECF Veteran
Verified Member
Jun 23, 2012
7,046
21,034
Western MA
So: I mounted the thicker o-ring (removed the bottom one).
It helps a little, yes, but the result is far away from the performance without any tip, this is still how I'm vaping. Maybe I'll try to get another one to replace even the other original o-ring and see if it gets better.
Actually I feel the same as yankeebobo: even by using different tips and by replacing the o-ring on the semitelescopic mouthpiece I wasn't able to replicate the experience without tip.

Exactly. It vapes great. It really does. The only way I can get that vape experience is NO tip, or a wide straight tip. I tried a vela tip and that works. I have a straight 10mm tip. Those work.

If I were to number out my experience, I would go something like this. With stock tip I can dial up a 1, 2, 3, 4, 5, 6
Then no tip or one of two other tips I get the 10. There is no 7, 8, or 9. That's how different it is from it's most adjustable stock tip to no tip in my book.
It's a great vape. Vapor is certainly there. Flavor shines when opened up. Dulls otherwise.
 
Last edited:

Klepto

Senior Member
ECF Veteran
Verified Member
Apr 8, 2012
119
44
52
Copenhagen, Denmark
Argh... I got air leak problems again. I took of the mouthpiece cause the aircontrol driptip was stuck, because of the bigger o-ring. I hold my finger at the bottom of the mouthpiece and i can breath true it with the aircontrol driptip mounted. When i remove the drip tip its totally sealed. So even with the bigger o-ring mounted it still leaks air in from the side of the driptip. I guess my mouth piece or the driptip has a faulth on it. With the bigger o-ring its way to hard to turn the aircontrol and when the o-ring dry, its VERY hard to move. Do you have a fix for this Imeo? Or do i need to get another mouthpiece?
 

Klepto

Senior Member
ECF Veteran
Verified Member
Apr 8, 2012
119
44
52
Copenhagen, Denmark
Should not got no problem..
You dropped it on the floor ?
or O-ring from the factory is the problem...
or a piece of ,,something,, stuck inside mp..
:2c:

No dropping or mishandling, and with the bigger o-ring its way to hard to move it when it dry. Its very clean, did use a ulltra sonic cleaner.
 

Klepto

Senior Member
ECF Veteran
Verified Member
Apr 8, 2012
119
44
52
Copenhagen, Denmark
Klepto. How does it function without the adjustable tip? Or with a straight drip tip?
Can you see daylight through the two holes in the adj tip?

It works like a dream without the drip tip. Very easy to test if it leak air. Can someone try to seal of the bottom of the mouthpiece with a finger to see if it leak also? I tried it with a spheroid drip tip, and its 100% sealed. Yes plenty of light true the drip tip. I use it on jgg now, but really want it on the piccolo.
 

yankeebobo

Vaping Master
ECF Veteran
Verified Member
Jun 23, 2012
7,046
21,034
Western MA
If you're looking at seal of the whole stock mp and adj tip sealed from the rebuildable base, it's sealed.

9anuzany.jpg
 

Fesso

Super Member
ECF Veteran
Verified Member
At least those of us waiting for our COV V2's get to reap the benefits of the first impressions and all the tinkering ya'll are doing to get it working best....
Another thing I just thought of was that I am really hoping for Kirfanis to make clear tanks for the V2. I never used them on my V1's because I love the engraving too much. With the V2 it could be the best of both worlds in that regard....
 
Last edited:

tazz

Super Member
ECF Veteran
Verified Member
Jun 21, 2012
329
1,738
62
Western Massachusetts
Well derrn Bruce maybe we US customers should pre-order via Yankeebobo from now on ;)i'd be vaping on my Penny V2 right now lol.


Sent from: The Land of Tortuga!

I'm with you on this. I thought that ordering from Bruce would be quicker but heck when I see the guy literally right down the street from me with his already and I know that I have at least another weeks wait I know where I will be ordering from.
 
Status
Not open for further replies.

Users who are viewing this thread