Phiniac Hand Blown Pyrex Tanks - Products, News, Updates & More!

Status
Not open for further replies.

moorea

Unregistered Supplier
ECF Veteran
Aug 11, 2009
6,868
7,355
55
Marion, MT
phiniac.com
I certainly didn't intend to infer anything negative about Phiniac or their products. I've both purchased their products and promoted them to others. I've just never heard of a juice so potent that it can't be held by a metal cartomizer. (Of course, that doesn't mean it isn't possible. I'm sure that I have plenty to learn about vaping.)

If the orings were in place, is it possible the center tube of the cart was pierced? I know I've done it before when punching carts, resulting in gurgling and juice running out of the bottom of my tank. It doesn't take much. I've taken them apart and you can't even see the hole, just that the fabric is looser in one place.

Even if you had to meant to say we might have forgotten the o-rings it would not have been the worse thing you could say. We have actually done it once or twice. We have gotten better at packaging, but who knows... we are only human. So no insult taken here!
 

moorea

Unregistered Supplier
ECF Veteran
Aug 11, 2009
6,868
7,355
55
Marion, MT
phiniac.com
Ok, everyone to Mata's house when the Apocalypse goes down ... I'll bring the cartos, got a ton of them! LOL And juice!

I say we all pack up and go to moo's house. We could live off the trout in her pond for years. And I live in Kansas, this place makes a zombie apocalypse seem like a picnic :)

Mata - good idea .... you, Chris and Odi can hunt also for meat ..... Plus I doubt Zombies could bust into moorea's log house, bet it sturdy as heck.

Sounds like a plan to me! I'll bring the fishing rods and you bring the guns and ammunition :)

I could probably get another Health Cabin order in .... more cartos! LOL


No need to bring ammo or guns or fishing rods, we have enough of all of that. And if we do run out Chris can kill most anything with his bow! You guys just need to bring the gooey goodness cake juice (and some charged batteries) and we are all set.

Heck most of the people living in these parts are crazy survivalists so this must be the place to be when that time comes!
 

moorea

Unregistered Supplier
ECF Veteran
Aug 11, 2009
6,868
7,355
55
Marion, MT
phiniac.com
Moo or one of the Phiniac experts here,

I ordered some cartos that are not pre-punched. For the colored glass Phiniac tanks how many millimeters from the bottom of the carto should the hole be punched so it is right at the bottom of the tank so I can use all the juice in the tank?

Our caps come in right about 8mm, so anything above that should be ok. I like to keep the hole as close to the bottom as possible but just above the cap.
 

Foggy

Super Member
ECF Veteran
Verified Member
Oct 24, 2009
941
1,970
breaking my refresh button
No need to bring ammo or guns or fishing rods, we have enough of all of that. And if we do run out Chris can kill most anything with his bow! You guys just need to bring the gooey goodness cake juice (and some charged batteries) and we are all set.

Heck most of the people living in these parts are crazy survivalists so this must be the place to be when that time comes!

I'll bring the nic juice that's in my freezer.
 

mg7454

Ultra Member
ECF Veteran
Nov 4, 2011
1,058
782
ROFL
I got one DC carto in an order from HC, waited for 6 weeks to get my order, and the carto leaked!
I think these pre-punched cartos, being mass-produced, are "if-y" and expensive when they fail.
This was the first time I tried a pre-punched carto!
What was I thinking?

It is back to purchasing my cartos from US venders only and punching my own cartos!
Live & learn!

This is my next pick, another gorgeous Phiniac Name Tank!
I love it!
ROAR!

tribal-lion-a_1.jpg

 

moorea

Unregistered Supplier
ECF Veteran
Aug 11, 2009
6,868
7,355
55
Marion, MT
phiniac.com
I got one DC carto in an order from HC, waited for 6 weeks to get my order, and the carto leaked!
I think these pre-punched cartos, being mass-produced, are "if-y" and expensive when they fail.
This was the first time I tried a pre-punched carto!
What was I thinking?

It is back to purchasing my cartos from US venders only and punching my own cartos!
Live & learn!

This is my next pick, another gorgeous Phiniac Name Tank!
I love it!
ROAR!

View attachment 95052


I prefer to punch them myself if for no other reason they are cheaper. But in addition I can punch as many or as little holes needed for different juices and all tanks are not created equal, I like my holes low!
 

damselle

Ultra Member
ECF Veteran
Verified Member
Jan 29, 2012
2,927
10,522
New England
Hi Everybody,

just got my first phinacs today...they're beautiful

I hope this hasn't been asked before, I can't read through this whole thread to find out, it's too much. I only had a dual coil carto to put in it on hand, which I thought was supposed to fit the tall boys, but I can't get a draw with it in my phiniac. I'm getting too much air. I'm thinking it's not a good fit?? do only the madvapes dual coil tanks work?
 

moorea

Unregistered Supplier
ECF Veteran
Aug 11, 2009
6,868
7,355
55
Marion, MT
phiniac.com
Hi Everybody,

just got my first phinacs today...they're beautiful

I hope this hasn't been asked before, I can't read through this whole thread to find out, it's too much. I only had a dual coil carto to put in it on hand, which I thought was supposed to fit the tall boys, but I can't get a draw with it in my phiniac. I'm getting too much air. I'm thinking it's not a good fit?? do only the madvapes dual coil tanks work?

Nope any DC tank that is the height of a madvapes or longer should work just fine.

Which DC are you using?
 

GeminII

Senior Member
ECF Veteran
Mar 26, 2012
84
155
Nashville, TN
I just got my first Phiniac today! It is AMAZING. I got the XL sandblasted Tribal Lion design in Amber Glass. I cannot overstate the quality of this piece. I love the Phiniac pouch that it ships in, too. With regard to my customer experience, I do not hesitate to say it is absolutely one of my very best to date. This is my first tank, and I am officially spoiled. I am a Phinatic.
 

mg7454

Ultra Member
ECF Veteran
Nov 4, 2011
1,058
782
ROFL
Hi Everybody,

just got my first phinacs today...they're beautiful

I hope this hasn't been asked before, I can't read through this whole thread to find out, it's too much. I only had a dual coil carto to put in it on hand, which I thought was supposed to fit the tall boys, but I can't get a draw with it in my phiniac. I'm getting too much air. I'm thinking it's not a good fit?? do only the madvapes dual coil tanks work?

Here is a pix of the tall boy with a DCC in it:

Tall Boy Tank w/ a Dual Coil Carto from Madvapes - Phiniac Rugged Pyrex Glass Tanks

Your DC Carto & Tank (when assembled) should look like that.

Are you sure you ordered the Tall Boy and not the XL?

If not, it may be the punch went through the center-straw of your cartomizer
(which would cause e-liquid to leak out of the center at the threads)
or maybe you dis-lodged one of the O-rings?
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread