Pico Squeeze 2 coming soon...

[score69]

I browsed eciggity yesterday and did see a few things I wanted. Do I NEED any of them. No.

For example, I have a few Therion BFs, but don't have a standard dna 75C Therion. Saw eciggity had one (not my preferred style), but I don't really need another dual 18650 standard mod. As far as DNAs go, my Paranormals 250Cs fit that hole in my collection.

I got off the site before I bought something else I didn't need.

 

[SonnyCooL]

I browsed eciggity yesterday and did see a few things I wanted. Do I NEED any of them. No.

For example, I have a few Therion BFs, but don't have a standard dna 75C Therion. Saw eciggity had one (not my preferred style), but I don't really need another dual 18650 standard mod. As far as DNAs go, my Paranormals 250Cs fit that hole in my collection.

I got off the site before I bought something else I didn't need.

don't think ... GO GO GOAL ....

 

[madstabber]

I’ve ordered from eciggity a few times as well and the shipping is really pretty fast considering they are in Hawaii and me Chicago. In fact I didn’t even realize they were located there until I stumbled upon that fact, after a few orders, cause shipping was so prompt. Now my squeeze 2 has shipped and it’s DHL Express so I should have it fast but the rda that was going to top it is lost I think. I opened an inquiry with Usps because it’s hasnt updated in a week so hopefully they figure out what crevice it fell into and get it delivered. Otherwise I may pick up another rda just because having two never hurt no one. Anyone know of a good flavor rda that will fit on the squeeze(under 26mm I believe) and is a single coil deck?

 

[Zaryk]

I’ve ordered from eciggity a few times as well and the shipping is really pretty fast considering they are in Hawaii and me Chicago. In fact I didn’t even realize they were located there until I stumbled upon that fact, after a few orders, cause shipping was so prompt. Now my squeeze 2 has shipped and it’s DHL Express so I should have it fast but the rda that was going to top it is lost I think. I opened an inquiry with Usps because it’s hasnt updated in a week so hopefully they figure out what crevice it fell into and get it delivered. Otherwise I may pick up another rda just because having two never hurt no one. Anyone know of a good flavor rda that will fit on the squeeze(under 26mm I believe) and is a single coil deck?

I enjoy the GR1, it is the best I have used so far when it comes to flavor. The wasp nano and entheon rank up there for flavor as well. I have a nudge 22 coming in the mail right now, I hear a lot of good things about it, but I usually hear good things about almost all the devices out there so I cannot comment on it yet.

 

[madstabber]

I enjoy the GR1, it is the best I have used so far when it comes to flavor. The wasp nano and entheon rank up there for flavor as well. I have a nudge 22 coming in the mail right now, I hear a lot of good things about it, but I usually hear good things about almost all the devices out there so I cannot comment on it yet.

Thanks for the suggestions, I was actually looking into the GR1. Now I may have to get it since it’s the best you’ve used. I like the size, which probably helps the flavor having a small chamber, and the low profile look. If you had to pick a con on the GR1, what would it be?

 

[Zaryk]

Thanks for the suggestions, I was actually looking into the GR1. Now I may have to get it since it’s the best you’ve used. I like the size, which probably helps the flavor having a small chamber, and the low profile look. If you had to pick a con on the GR1, what would it be?

The biggest con would have to be that it can be picky about builds. If you like low ohm builds, it can get hot and spitty, but from my experience anything above 0.3 ohm seems to work well. Some also dislike the tiny drip tip, but I like it so that isn't a con to me.

 

[madstabber]

The biggest con would have to be that it can be picky about builds. If you like low ohm builds, it can get hot and spitty, but from my experience anything above 0.3 ohm seems to work well. Some also dislike the tiny drip tip, but I like it so that isn't a con to me.

Sounds perfect for me. I almost always vape +.3 ohm coils. I like 510 drip tips more than the 810 and I have several drip tips in both sizes so the drip tip shouldn’t be an issue for me. Thanks for the advice and I think I’m gonna order one vapordna has them for $31 and they get orders here in a couple days usually so it will be here when my squeeze gets here so I’ll be ready to go. Hopefully by the weekend I’ll be in flavor country

 

[Zaryk]

Sounds perfect for me. I almost always vape +.3 ohm coils. I like 510 drip tips more than the 810 and I have several drip tips in both sizes so the drip tip shouldn’t be an issue for me. Thanks for the advice and I think I’m gonna order one vapordna has them for $31 and they get orders here in a couple days usually so it will be here when my squeeze gets here so I’ll be ready to go. Hopefully by the weekend I’ll be in flavor country

Hope you enjoy it as much as I do, it is responsible for shelving a lot of my collection. I ended up buying another and have plans to add two more soon.

 

[madstabber]

Hope you enjoy it as much as I do, it is responsible for shelving a lot of my collection. I ended up buying another and have plans to add two more soon.

Order placed now I have a GR1 on the way. Pretty sweet deal, found a coupon for $10off order of $35. GR1 was $31 so I throw in a 22mm top cap for the GR1 in red to match matchy my red squeeze 2 that I have on the way. Serendipitous how it all worked out. Had to change to a red mod to get it now and just happened to need to throw in a red top cap to get $10 coupon. It was meant to be. Now if all goes as planned I will be vaping it by Saturday.
Now I have to hide my wallet from myself before I talk myself into needing more vape supplies that I absolutely don’t need. Thank you all for helping to enable me

 

[Figs]

Squeeze 2 set to arrive in 103° Granbury Texas tomorrow. Also set to arrive are some saddlebags for my bicycle (I ride 10-20 miles a day). Big day comin’

 

[cliffy15]

I’ve ordered from eciggity a few times as well and the shipping is really pretty fast considering they are in Hawaii and me Chicago. In fact I didn’t even realize they were located there until I stumbled upon that fact, after a few orders, cause shipping was so prompt. Now my squeeze 2 has shipped and it’s DHL Express so I should have it fast but the rda that was going to top it is lost I think. I opened an inquiry with Usps because it’s hasnt updated in a week so hopefully they figure out what crevice it fell into and get it delivered. Otherwise I may pick up another rda just because having two never hurt no one. Anyone know of a good flavor rda that will fit on the squeeze(under 26mm I believe) and is a single coil deck?

I'll throw in on this one. I've bought quite a few atties in the past 8 months or so of squonking - usually from someone's "best of" list.

One of my favorites isn't made anymore but if we don't consider that one, my top two choices would be the Entheon and the Basic RDA's. Both are single coil.

The Entheon is a bit finicky but if you experiment with it (coil type, size, and positioning it can be great).

I'm currently using a Basic RDA 1.0 clone (since it was just a trial and they are a bit harder to get since you need to wait for a FB list). I was so impressed by it that I have an authentic v1.1 in transit as we speak.

The build quality looks quite good and the airflow makes over-squonking and leaking very difficult. I think of it as a much better Wasp Nano. MUCH better. And the nano is very popular...

 

[score69]

don't think ... GO GO GOAL ....

You folks are a very bad influence.

Ended up ordering a rainbow Squeeze 2, and picked up a Therion 75C at the same time. I justified the Therion becuase it's a dual PARALLEL 18650. Of course I needed another RTA for the Therion. Who am I kidding?

My first order with Eciggity, we'll see how it goes. I'll just blame you guys when the credit card bill shows up, lol.

I was going to hold off on the Squeeze, but why wait? I'm sure I would have gotten one sooner or later.

Next is to find the Basium once it's released. Really got to have the green one.

 

[SonnyCooL]

You folks are a very bad influence.

Ended up ordering a rainbow Squeeze 2, and picked up a Therion 75C at the same time. I justified the Therion becuase it's a dual PARALLEL 18650. Of course I needed another RTA for the Therion. Who am I kidding?

My first order with Eciggity, we'll see how it goes. I'll just blame you guys when the credit card bill shows up, lol.

I was going to hold off on the Squeeze, but why wait? I'm sure I would have gotten one sooner or later.

Next is to find the Basium once it's released. Really got to have the green one.

welcome to squonk hole
deepest than any vape hole

 

[Susaz]

I'm very interested in this one. I have no particular issues with the metal tube feed other than being more difficult to clean thoroughly ... but that is more to do with the mod design than the tube itself (which is fixed with the large, removable door on the squeeze 2).

I prefer the squonk port location on the squeeze over, say, the Inbox location. I vape left-handed so this may be a bit awkward for me to use but I'm still going to be buying one. I really like my current squeezes but they would get more use if they were regulated.

I'd prefer it sized for an 18650 but I suppose a bigger size and more heft isn't necessarily a bad thing.I have large hands, anyway, and the original squeeze is close to actually being too small.

edit: I think the only real issue for me is the bottle cap. I was originally hoping that the wismec luxotic silicone bottles I use in my current squeeze would be compatible but now I can see that it won't be the case because of the unique offset cap just for the squeeze 2.

Do you have a squonker bottle such as the one from Geekvape to fill a squonker from the top?

I fill the small bottle with fresh water and a little alcohol, screw the Geekvape bottle onto the atty threads, turn the mod upside down and squeeze the squonk bottle until empty. Repeat a couple of times. I do it in every squonker, it can become quite gunky with time.

 

[score69]

welcome to squonk hole
deepest than any vape hole

Oh, I'm already VERY deep in the squonk hole, trust me, lol. It's an addiction all of it's own. Once I started, I bought a large variety of single coil BF attys, mods, etc. Haven't even really been paying that much attention to RTAs and standard mods any longer. I haven't built or vaped anything other than BF devices since the first few days I tried it. My other gear will get used here and there, if nothing else, I will keep if for the vape closet.

As far as Eciggity goes, my order shipped same day, scheduled to be delivered on Monday. Not bad coming from Hawaii. So if all goes well, I've got another vendor site to stalk for new gear, lol.

Actually really glad I got the Therion too. I have the Therion BF, but have wanted the standard duel battery model for a while.

 

[Figs]

24+ hours With the Squeeze 2, and likin’ it. Training my muscle memory to hit the fire button with the side of my thumb. Another day and I should be there. I do see where lefty’s will have a steeper learning curve, but doable. Just be aware that you will have to find a way that works for you.

Hair trigger bottle. But even though I use 16&18mm toppers, I have not over squonked yet. I’m being extra careful. I think the silver is a beauty, perfect for me as I like an all metal look. Fit and finish good, and my screen is aligned. Battery cap threads a little rough, but a swipe of chap stick cured it. 510 threads are smooth.

Turned off the light as it quickly became annoying. Menu is simple enough to navigate, no problem. I vape wattage so I set it up, and locked the buttons. Got a 20700 in it, hits good and no rattle. Battery life is what I consider average. Just about done with second bottle, easy fill and no mess.

The Squeeze 2 along with my faithful Inbox will be my at home Squonkers. My two Squeeze 1’s will be outside and about town. I don’t see the 2 as being in my pocket. A little on the heavy side, and I fear accidentally activating that hair trigger bottle.

I’m a happy customer

 

[Vicman]

Well, I broke down and ordered a black Squeeze kit last night from Eciggity. I also broke a rule of mine and ordered a couple 21700's (purple Vapcell 35a) from them as well. I usually order from trusted Mooch recommended suppliers but I have been ordering from these guys for years and will take a chance as I really will only need these batteries; just stocked up on 18650's and 26650's a month or so ago.

This is my first step down the squonk rabbit hole. Been wanting to try it for a while but wanted a regulated one. A bunch came out but still waited, waited, waited, then got an email from them last night with the Squeeze as the featured product and I pulled the trigger. I need another mod like I need a hole in the head but if I was gonna get one, it was going to be a squonker. Curiosity just killed another cat, so to speak

 

[SonnyCooL]

24+ hours With the Squeeze 2, and likin’ it. Training my muscle memory to hit the fire button with the side of my thumb. Another day and I should be there. I do see where lefty’s will have a steeper learning curve, but doable. Just be aware that you will have to find a way that works for you.

Hair trigger bottle. But even though I use 16&18mm toppers, I have not over squonked yet. I’m being extra careful. I think the silver is a beauty, perfect for me as I like an all metal look. Fit and finish good, and my screen is aligned. Battery cap threads a little rough, but a swipe of chap stick cured it. 510 threads are smooth.

Turned off the light as it quickly became annoying. Menu is simple enough to navigate, no problem. I vape wattage so I set it up, and locked the buttons. Got a 20700 in it, hits good and no rattle. Battery life is what I consider average. Just about done with second bottle, easy fill and no mess.

The Squeeze 2 along with my faithful Inbox will be my at home Squonkers. My two Squeeze 1’s will be outside and about town. I don’t see the 2 as being in my pocket. A little on the heavy side, and I fear accidentally activating that hair trigger bottle.

I’m a happy customer

yes full metal look, i used to own Kato Mod until it get stolen and that is another reason i must own one ....

 

[madstabber]

My squeeze 2 shipping says it will here Tuesday. I got two RDA’s that will be here tomorrow and early next week so I’ll be squonking on Independence Day if all stays on time. I will be popping my metaphorical squonk cherry also. I’ve been holding out for fear I’d like it too much and neglect my other mods and rta’s. But I won an RDA and $50 gift card So really what choice did I have. Not my fault, I blame the enabling vape vendors, the complicit forums, and YOU. That’s right you! The vaper reading this right now. So I’m just a victim in all of this. Pray for me

 

[cliffy15]

Just saw this. Yes, I have a geekvape refill bottles and a coupe of other ones. I use this method for flushing as well

Do you have a squonker bottle such as the one from Geekvape to fill a squonker from the top?

I fill the small bottle with fresh water and a little alcohol, screw the Geekvape bottle onto the atty threads, turn the mod upside down and squeeze the squonk bottle until empty. Repeat a couple of times. I do it in every squonker, it can become quite gunky with time.