I'm looking for my first squonk mod.
Any leakage issues?
The bottle - is it interchangeable (standard)?
Any issues at all ?
Any leakage issues?
The bottle - is it interchangeable (standard)?
Any issues at all ?
- Status
Not heard a single complaint on Pico Squeeze.. I might suggest getting the squeeze 2.. it's regulated higher power and uses a better battery.
All squonk mods and regular tanks and atty can and will leak... if not maintained or if used incorrectly. Anyone that says their stuff doesn't like.. left out the word YET.
Sent from my SCH-I605 using Tapatalk
All squonk mods and regular tanks and atty can and will leak... if not maintained or if used incorrectly. Anyone that says their stuff doesn't like.. left out the word YET.
Sent from my SCH-I605 using Tapatalk
Top airflow tanks don't leak.
I love my Squeeze's but they aren't regulated.(as 93 suggests) The Squeeze 2 may be a better choice if that's important to you.The only thing I would suggest is purchasing a 510 refill bottle with them. It makes cleaning them a breeze.
Can juice get from the tank to the coil chamber? Is the coil chamber open to the outside?Top airflow tanks don't leak.
I love my Squeeze's but they aren't regulated.(as 93 suggests) The Squeeze 2 may be a better choice if that's important to you.The only thing I would suggest is purchasing a 510 refill bottle with them. It makes cleaning them a breeze.
If yes to either leaks are possible... if no to either the atty will not vape.
Scientific fact.
Sent from my SCH-I605 using Tapatalk
Well that explains the ”lazers”I failed science.
My top air tanks haven't leaked....yet.
The bottle that comes with the Squeeze is proprietary. Some people cut the metal tube and install different bottles but imo its not really necessary. I actually like the metal tube as it doesn't seem to make a mess when removing it to refill.
... and how do you prevent this from leaking ?
I suppose, that I'll stick to my drippers and control the juice flow myself until the squonk technology develop some more tight clearomizer - bottle connection.
I suppose, that I'll stick to my drippers and control the juice flow myself until the squonk technology develop some more tight clearomizer - bottle connection.
Last edited:
I've got a couple Pico Squeeze's. A Great Little Squonker. And hard to Not buy one for the Price.
I have had Zero Leaking issues. Either at the 510 or at the Inside Tube/Bottle Connection.
The Bottles are Not Interchangeable. But replacements are Cheap. And the Bottle is Pretty Sturdy.
The Pico Squeeze isn't a VW Device. It's a Direct Output Device. So it is going to perform like a Mech. But it has some Built in Protections that a Pure Mech Doesn't have.
The Only Knock I would put on the Pico Squeeze is the RDA that comes in the Kit. It is, IMO, So-So at best. So I would Recommend someone just buying the Mod ala carte. Especially if someone is using RDA's that are BF Compatible right now.
Most RDA's today come with a BF Pin. And Many Older RDA can be Converted relatively painlessly by just Replacing the Solid 510 Pin with a BF Pin.
... and how do you prevent this from leaking ?
I suppose, that I'll stick to my drippers and control the juice flow myself until the squonk technology develop some more tight clearomizer - bottle connection.
The Hole in the Mod's/RDA's 510 Pin provides a path of Least resistance for the e-Liquid to flow. So it is Easier for the e-Liquid to just Flow Up thru the Hole when you Squonk.
Verses trying to pass thru the Flat Area of the Mod's/RDA's 510 Pin. And then to wind it's way thru the 510 Threads.
I'm not attending to purchase the RDA that comes in the Kit, only the mod. I'd like to use a Goon V1.5 or Drop RDA.
Regarding to leakage ...
with the Drop, should be no problem...
, but I'm not sure about the Goon ...
Regarding to leakage ...
with the Drop, should be no problem...
, but I'm not sure about the Goon ...
It will be fine.I'm not attending to purchase the RDA that comes in the Kit, only the mod. I'd like to use a Goon V1.5 or Drop RDA.
Regarding to leakage ...
with the Drop, should be no problem...
, but I'm not sure about the Goon ...
The mod 510 threads do the sealing.
If you do get any leaking, just put a small o-ring on the atty 510.
Before squonking became mainstream and hollow 510 pins were not available, we would press out the positive center post and dremmel a groove on the side or cut a notch in the insulator. Anything to get the juice into the atty. No leaks.
Last edited:
The Pico squeeze V1 can only be used with attys 22mm or smaller. The Goon is 24mm and will not fit. You can preorder the new Drop Solo in 22mm.
Last edited:
My Pico Squeeze battery cover is starting to peel/lose some of the colour. Any idea where I can get a replacement? Cant seem to find them.
@Coastal Cowboy probably has all the models. Maybe he'll try to see if the caps interchange between models. I know there was someone on the shinyitis thread who had a dead pico, 75w I think.
I would just peel and paint it, unless its not a painted one, of course.
Its a black cover. I've always wondered if folks make nice fancy aftermarket battery covers for the squeeze. Would be a nice accessory.
I believe Jwraps does covers for the original Squeeze.
I only have the silver and grey colors of that mod and have never wrapped them. The white, grey and pink/purple/mauve/girly colors all have the same powder coat that the Pico 75 came in. The silver is brushed metal. The all black I'm not sure of.
Maybe I misunderstood, here. I thought OP was referring to the screw on battery cap. Feel free to ignore me if I goofed it.
@Coastal Cowboy, if you get a chance, just for my own curiosity, can you see if the various caps for 18650 models will interchange?
Last edited:
The cap on the Pico iStick fits the original (semi regulated) IKonn as well as the original Squeeze. I'd say all 18650 Pico battery caps are inter changable. The squeeze 2 obviously not.
- Status
Similar threads
- Locked
