Precise ELA Telescoping Mod by Super-T!

Status
Not open for further replies.

Nicblazer

Super Member
ECF Veteran
Verified Member
Aug 28, 2011
839
1,216
Indiana
Just ordered brass rings and non-locking button! Any other brass parts that become available i will be purchasing as well. I want to get as close to a full brass version as possible, wink-nudge :)

As far as certain atties not fitting, one possibility is to use a very short 510-510 adapter with the adjustable cap. The air control would have to remain open to cover the adapter, but at least the threads on the ELA would no longer be an issue.


At this rate, Dave better make some more brass buttons. JK, Dave. I swear :)


Nic
 

snork

Vaping Master
ECF Veteran
Verified Member
May 30, 2011
6,181
11,235
CO
Nobody ever talks about the Spheroid. I recently discovered it and it has become my second favorite atomizer. For me it strikes a great balance between dripping and capacity, retaining most of the sanitary and flavor benefits of dripping while allowing me to stick an all-day vape in my pocket with no fear of leaking even upside down. The carto-like concept of it kept me away from it for a long time, but after using it and finding that cartos have little in common with it operationally as well as its stellar flavor and vapor production, I've been sold. I understand the Prometey can work under the same principle?
I made a fair share of goofs while I was learning the Spheroid, but when I realized its relationship to dripping and used a "less is more" approach to assembly it has done me right in a big way.
 
Hi everybody!! Been trolling this forum for quite a while now had interest in the ela from the start. Tried ordering one around march and the site was acting up. Tried again earlier this month and got through. Order 15744. I'm excited to see everyone is more than happy or should I say ELAted to have received as well as the quality of the mod...I've got a p plus 18350 with a kicklet cap and my problem isn't the threading, but the depth of the center pin. I had to adjust most of my attys center posts in order to fire them...nimbus, gamma tank, igo-l with some considerable persuasion. Luckily the ithaka has an adjustable post but looks huge atop the 18350. Nice to see a bunch of level headed, humorous vapers who love super t!!!
 

forcedfuel50

Unregistered Supplier
ECF Veteran
Okay okay cancel my cancellation! Though I hope you read my entire email! David, I believe in your product, I believe in your quality, I also believe in your service, and I sincerely want to see more from you!

Hi Freckle,

Could you reforward me the emails to this email address, i don't see them in my inbox. Send to: supertmanufacturing@yahoo.com
 

Mindtroverted

Super Member
ECF Veteran
Verified Member
Jul 23, 2012
329
286
38
Zagreb, Croatia
Got extra tanks and parts too. Everything is a rip off , it's only worth what you are willing to spend :)

True that. And if you got extra parts then that's fine. It's the best atomizer I've tried, and I've tried a lot of them. If you're having any problems, feel free to contact me
 

forcedfuel50

Unregistered Supplier
ECF Veteran
I sent you an email. All I can say is that all my atties fit in the flat cap that I received on the p+18650 and the p+16340 and the p+10440. They do not work in the kicklet cap that I received on the 18500

Also, as mentioned earlier, we didn't machine those Kiklet caps, it was contracted out, but we can open the threads up bigger for you so your rba will fit, no charge. :)

Send to:

Super T
Box 331
Sauk Rapids, MN 56379
 

d3mon

Super Member
ECF Veteran
Jan 25, 2012
439
576
50
san antonio
It's understandable, demon.


Nic

it's not ME man. i just know for a FACT that my gf will attempt to use my ELA when i'm not looking or sleeping...and she doesn't have the best track record for taking care of our vape stuff.

she's been vaping for almost 6 months. she was using my old egos...but she complained that it wasn't as good as my Bolts and wanted her own. so i bought her a pink bolt and she was happy.

But i guess she never actually realized that jamming her Bolt (that has no button lock out) in her back pocket while sitting in the restaurant pounding margaritas with her friends was a bad idea. she figured out there was an issue when her ... started boiling and the Carto burned up and dumped a full tank of Heather's Heavenly Vape down her buttcrack. came home smelling like just-baked blue berry muffin and crying over a broken Bolt LOL.
 

Nicblazer

Super Member
ECF Veteran
Verified Member
Aug 28, 2011
839
1,216
Indiana
it's not ME man. i just know for a FACT that my gf will attempt to use my ELA when i'm not looking or sleeping...and she doesn't have the best track record for taking care of our vape stuff.

she's been vaping for almost 6 months. she was using my old egos...but she complained that it wasn't as good as my Bolts and wanted her own. so i bought her a pink bolt and she was happy.

But i guess she never actually realized that jamming her Bolt (that has no button lock out) in her back pocket while sitting in the restaurant pounding margaritas with her friends was a bad idea. she figured out there was an issue when her ... started boiling and the Carto burned up and dumped a full tank of Heather's Heavenly Vape down her buttcrack. came home smelling like just-baked blue berry muffin and crying over a broken Bolt LOL.



Rofl ! Trust me, I had my moments. Like leaving my bottle of eye drops beside my 24mg RY4......


Nic
 

Cjax

Ultra Member
ECF Veteran
Verified Member
Sep 12, 2012
1,750
1,211
RVa USA
ahhhhh. i did not know that. :D though, for me....no lock...no shop.

Unfortunately i have yet to see a brass locking button on a super-t device, though admittedly I've only been acquainted with them for the last year or so, but even in the classifieds all I've seen is stainless, so i figured get it while the gettin's good!
 

d3mon

Super Member
ECF Veteran
Jan 25, 2012
439
576
50
san antonio
Rofl ! Trust me, I had my moments. Like leaving my bottle of eye drops beside my 24mg RY4......


Nic

or when i left the fill syringe right next to the brisket injection syringe.....

btw...my GF did NOT appreciate the "hot ..." wise cracks i unleashed on her for the following week after she melted her bolt
 

jamesd1628

Super Member
ECF Veteran
Verified Member
Jan 23, 2010
701
815
Chattanooga/Ringgold
Nobody ever talks about the Spheroid. I recently discovered it and it has become my second favorite atomizer. For me it strikes a great balance between dripping and capacity, retaining most of the sanitary and flavor benefits of dripping while allowing me to stick an all-day vape in my pocket with no fear of leaking even upside down. The carto-like concept of it kept me away from it for a long time, but after using it and finding that cartos have little in common with it operationally as well as its stellar flavor and vapor production, I've been sold. I understand the Prometey can work under the same principle?
I made a fair share of goofs while I was learning the Spheroid, but when I realized its relationship to dripping and used a "less is more" approach to assembly it has done me right in a big way.

Yes, same principle, though the Prometey (IMO) has some significant advantages:

- wider, so it holds much more juice
- titanium, so it's much lighter
- has a very tall air post below your coil, so leaking is minimal to non-existant
- due to the tall air post, it can be set up as a dripper (no filler, with wick down instead of up)
- air hole on the side rather than the 510 connector. Makes for better airflow and (I think) also helps it to not leak
- has a better airflow, IMO. Maybe slightly tighter than the spheroid, but not much. Seems perfect to me.
- it looks totally bad-... on the ELA

Price point is close to the Spheroid ($120 including shipping, plus about $9 to send a stupid Moneygram, so about $129). It is, however, a bit harder to get. You have to get on the dang list.
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread