Precise ELA Telescoping Mod by Super-T!

[GB023]

Welcome golfbum,

That is correct on the P+, we won't be running more until after the first batch of ELA's are done, and even then it'll take a while, i'd estimate in May or June we'll have more. May have a few tweaks to it too and of course, better quality machining (inside and out) now that production is in house on them.

Thank you forcedfuel50

If they are of higher quality than the P+ I am vaping on right now...It will be well worth the wait....

 

[ryantherobot]

Just curious, but to we have a real time update on the ELA? Last I checked the veins were being plated?..forgive me if there was an update and I missed it.

 

[GB023]

Just curious, but to we have a real time update on the ELA? Last I checked the veins were being plated?..forgive me if there was an update and I missed it.

http://www.e-cigarette-forum.com/fo...ing/394911-precise-ela-production-status.html

 

[forcedfuel50]

Don't get "Shockwaved" on the ELA and miss out! We are only running two batches at the introductory price with its full boat of features. Its an introductory price and estimating production costs, the current cost of purchase is approximately the cost of manufacture so its an unbeatable value in the APV world. The $189.99 was an introductory price and will be adjusted accordingly once the preorder is over (and/or standard "features" may become additional cost options in the future).

We are now transistioning into the second "batch". Some of the quanitities of parts we have run on the "first batch" were over what was needed and will be applied to the second batch. Since the programming and tooling is in place, the second batch (set to begin production in approximately 10 days) will be a shorter production time then the first batch.

There are only approximately 200 units going to be produced on this second batch at the introductory price. Once they are gone, they are gone, prices and features will change. Don't get "Shockwaved" and miss out! I know preorders and waiting sucks, but you also know Super-T follows through and quality and design is first rate!

 

[alanyourmouth]

God i would like some pics, video's, updates or anything today. I find myself checking back here too often. Its killing me. How sad is that.

http://www.e-cigarette-forum.com/fo...ing/394911-precise-ela-production-status.html

no pictures just updates

 

[Riverboat]

Don't get "Shockwaved" on the ELA and miss out. We are only running two batches at the introductory price with its full boat of features.
There are only approximately 200 units left on this second batch at the introductory price. Once they are gone, they are gone, prices and features will change. Don't get "Shockwaved" and miss out! I know preorders and waiting sucks, but you also know Super-T follows through and quality and design is second to none!

You will be sorry if miss out.......
Full boat features...I like the sound of that

 

[Boiler]

You will be sorry if miss out.......
Full boat features...I like the sound of that

Yes, I kept running "introductory price" through my head, over and over. What could it mean? Then, using quantitative geometry, I calculated the price might be more if I waited too long, and I'm already paying extra to support my fellow Minnesotians.

Now I wonder if I made it into the first batch or not. Probably not.

 

[Blix]

Finally some vapemail today:

 

[ukeman]

thanks David.. and responders... I got this off the classies, billed as "like new" that's all i know.
It works for a couple of hybrid atomizers, the Cobra 3mil so far... but not the Wand.
I'll email you for sure...
Oh - I tried a Penelope too and not only did it not fire, it had no air draw.... so I'm wondering if this is one of the older ones.I wonder if I got it "fixed" for these, would it cause any issues for the atomizers that currently work on it?

The as installed post height has been raised on PrecisePlus's sold the last few months to solve this problem. How old is your unit? It probably has the old post height setting if it isn't working for you. We can raise it up for you, email us for details.

 

[vaptamist]

Well, there goes my meager resolve.

 

[Stratified]

Don't get "Shockwaved" on the ELA and miss out! We are only running two batches at the introductory price with its full boat of features. Its an introductory price and estimating production costs, the current cost of purchase is approximately the cost of manufacture so its an unbeatable value in the APV world. The $189.99 was an introductory price and will be adjusted accordingly once the preorder is over (and/or standard "features" may become additional cost options in the future).

We are now transistioning into the second "batch". Some of the quanitities of parts we have run on the "first batch" were over what was needed and will be applied to the second batch. Since the programming and tooling is in place, the second batch (set to begin production in approximately 10 days) will be a shorter production time then the first batch.

There are only approximately 200 units going to be produced on this second batch at the introductory price. Once they are gone, they are gone, prices and features will change. Don't get "Shockwaved" and miss out! I know preorders and waiting sucks, but you also know Super-T follows through and quality and design is first rate!

Dang it! now I might have to preorder a second one...

 

[Freckle]

I am checking funds as we speak.

 

[Freckle]

Dag gum it, I best wait just to make sure which finish I get. If I don't get to order a second at the introductory price then it wasn't meant to be.

 

[jasl90]

Finally some vapemail today:

What drip tip is that???

 

[kscoggins]

What drip tip is that???

That looks like an Apex/Thermovape UFO tip

 

[daveinleics]

Oh well, I've finally gone and done it and pre-ordered
I blame the 'Don't get "Shockwaved" ' post above
I was going to wait till they arrived in the UK, but given the scrum there will be when they do, I really wanted to make sure I got one of these - I've been planning to get a Super T mod for a long time!

 

[Albinon]

For the last month and a half I have been confident in the choie of finish that I ordered, and then you guys have to go talk about getting one of each. I could not stand it. I just ordered a second one. I"m just glad that they no longer have debtors prison.

 

[donnah]

I'm in the market for a nice mech mod. A couple questions.. I use ss mesh rbas that have to stay upright. How stable is this device as far as being able to set it on a table? I am looking hard at the EA mod but I'd rather go with a company that sells and warranties their products. Also, how big around is it? If I preorder tonight, will I get in on this second batch?
Thanks!

 

[pAth77]

...Oh - I tried a Penelope too and not only did it not fire, it had no air draw.... so I'm wondering if this is one of the older ones.I wonder if I got it "fixed" for these, would it cause any issues for the atomizers that currently work on it?

That's odd because my P+s are from one of the first batches, and they all work with my Pennies. It shouldn't be a problem because you can adjust the center pin of the Penny down until it makes contact with the positive post.

 

[snork]

I'm in the market for a nice mech mod. A couple questions.. I use ss mesh rbas that have to stay upright. How stable is this device as far as being able to set it on a table? I am looking hard at the EA mod but I'd rather go with a company that sells and warranties their products. Also, how big around is it? If I preorder tonight, will I get in on this second batch?
Thanks!

I'm going to say that the ELA won't be very stable sitting on its button, considering it appears to share the same button as a PrecisePlus.