Precise ELA Telescoping Mod by Super-T!
- Thread starter forcedfuel50
- Start date
- th_trl_thread_readers 0
- Status
It's a purposeful surprise! I have another polished one on the way in the unknown future too.
Geez, I can finally see what you guys have been talking about. It's exquisite.
Polished on the way? So you did buy 2 ELA's.....lol
I told you it was a beast!
Last edited:
Sean Connery .. I would do that.Did I just say that?
Yes you said that, and I would bet my boardwalk roller skates that anavidfan was thinking it too! Well, it just occurred to me that you might be able to answer a delicate question that I've wanted to ask. I can't think of an easy way to say this, so I'll just come out and ask it. In the context of proper etiquette, is ok to vape after sex?
Last edited:
Awesome, I expect we'll get Cucco's buy-in too! But, there probably is an appropriate flavor for this, something along the lines of fragrant flowers - roses, daffodils etc? That may be problematic for me, at my age thinking more like the aroma of fine brandy in a snifter glass ...
or fine brandy in a snifter glass - cheers baby!
or fine brandy in a snifter glass - cheers baby!
More questions for the Kayfun crowd ...
Seems many of you have the 3.1 and Lite, which one do you like better for vaping and why?
Also, what is the diameter of the Kayfun, 22mm or 23mm?
Being a silica type RBA it should be essentially leak proof, is it?
The clear tank is made out of? I've seen polycarbonate and another synthetic mentioned.
Can you get a glass tank for it?
Seems many of you have the 3.1 and Lite, which one do you like better for vaping and why?
Also, what is the diameter of the Kayfun, 22mm or 23mm?
Being a silica type RBA it should be essentially leak proof, is it?
The clear tank is made out of? I've seen polycarbonate and another synthetic mentioned.
Can you get a glass tank for it?
Received the Kayfun 3.1 yesterday. Pairs nicely with the ELA.
... I'll say it does - beautiful!
Geeze, just how long would my ELA be in Long John Silver mode using a Kayfun 3.1?
Long John Silver mode = ELA w/18650 + Kicklet + Kayfun 3.1 + Tanbur T-Tip YIKES!
Long John Silver mode = ELA w/18650 + Kicklet + Kayfun 3.1 + Tanbur T-Tip YIKES!
I like the Lite much better, it's quite a bit shorter. It's 22mm and yes pretty much leakproof.
There are no glass tanks for them yet.
There are no glass tanks for them yet.
I love the Lite paired with my ELA polished version. There's almost a perfect match between the 2. I also have a 3.1 in beta that is waiting for my Satin ELA. I also use a term C with a Kayfun adapter and there are certainly more similarities than differences due the the way they produce vapor. I still like the 3.1 the best but that could be psychological cuz I paid way more for it. Lol. I think they are all great complements to the ELA and you can't really go wrong with any of these setups. I've recently tried a micro coil with cotton wicking and it's the best setup yet.
I compared my 3.1 to my friend's Lite, and I actually like the Lite better. My only concern before was the lack of adjustable airflow, but the draw on the Lite is perfect for me (others might feel differently). Once you know how to set up a KF correctly, these no real need for the collector tank. The Lite also measures 8.5mm (about 1/3") shorter than the 3.1, which is a pretty significant difference. The finish also matches the ELA perfectly.
Thanks for the input, I would say they are a perfect fit for the ELA after looking at MikeJA's 3.1 photo.
I was totally happy with my kayfun 3.1, but took a chance and sold it, bought a lite and had $$ left over for dinner and a movie.. I couldnt be happier w my lite. It really is alot smaller, and draw is perfect for me too
I found out my problem with why I thought my battery wasn't lasting as long in the ELA. The dern center post wasn't screwed in good enough on my kayfun! Yeah it took me quite sometime to figure that out. I told you people I hate doing dry burns. Well I finally did one last night. HA HA that was all kinds of nasty in there! Realized before I broke her down that my pin wasn't tight. Oh dear!
I told you people I hate doing dry burns. Well I finally did one last night. HA HA that was all kinds of nasty in there!
I have yet to experience one of those EUREKA moments (still waiting on the equipment). But it has come up in my travels a couple of times. I was at a local vape shop asking some questions and it was mentioned by the help to refill your tank "here" (pointing to a tank near the bottom). "You don't want to be totally out before refilling, you might get a dry hit". A couple of customers overheard that and chimed in "oh yeah, a dry hit will suck your eyes back into the sockets and reset your clock big time!" I guess it can be pretty unpleasant lol.
I have yet to experience one of those EUREKA moments (still waiting on the equipment). But it has come up in my travels a couple of times. I was at a local vape shop asking some questions and it was mentioned by the help to refill your tank "here" (pointing to a tank near the bottom). "You don't want to be totally out before refilling, you might get a dry hit". A couple of customers overheard that and chimed in "oh yeah, a dry hit will suck your eyes back into the sockets and reset your clock big time!" I guess it can be pretty unpleasant lol.
How about machine quality on the Kayfun tubes & parts? I've see all the pics and resolution is really not high enough to see small flaws if present. (Nor would you want to show them in higher resolution if present). The German's are pretty damn good at workmanship, so would expect flawless quality of all the bits - but I have to ask anyway. Now be honest, when you got your Kayfun and began assembling the bits and pieces, was the finish on the parts high quality or did you encounter a small scratch, burr, little ding or other blemish here and there?
Quality is pretty good. I haven't noticed any blemishes on mine and the threading is better than on a lot of other RBAs I've used.
- Status
Similar threads
